> -----Original Message-----
> From: Zhang, Qi Z <qi.z.zh...@intel.com>
> Sent: Friday, June 30, 2023 4:27 PM
> To: Liu, Mingxia <mingxia....@intel.com>; dev@dpdk.org
> Cc: Wu, Jingjing <jingjing...@intel.com>; Xing, Beilei
> <beilei.x...@intel.com>;
> Liu, Mingxia <mingxia....@intel.com>
> Subject: RE: [PATCH] net/idpf: refine dev_link_update function
>
>
>
> > -----Original Message-----
> > From: Mingxia Liu <mingxia....@intel.com>
> > Sent: Monday, June 26, 2023 7:15 PM
> > To: dev@dpdk.org
> > Cc: Wu, Jingjing <jingjing...@intel.com>; Xing, Beilei
> > <beilei.x...@intel.com>; Liu, Mingxia <mingxia....@intel.com>
> > Subject: [PATCH] net/idpf: refine dev_link_update function
> >
> > This patch refines idpf_dev_link_update callback function according to
> > CPFL PMD basic code.
> >
> > Signed-off-by: Mingxia Liu <mingxia....@intel.com>
> > ---
> > drivers/net/idpf/idpf_ethdev.c | 63
> > ++++++++++++++++------------------
> > 1 file changed, 30 insertions(+), 33 deletions(-)
> >
> > diff --git a/drivers/net/idpf/idpf_ethdev.c
> > b/drivers/net/idpf/idpf_ethdev.c index fb59655555..bfdac92b95 100644
> > --- a/drivers/net/idpf/idpf_ethdev.c
> > +++ b/drivers/net/idpf/idpf_ethdev.c
> > @@ -30,6 +30,23 @@ static const char * const idpf_valid_args[] = {
> > NULL
> > };
> >
> > +uint32_t idpf_supported_speeds[] = {
> > + RTE_ETH_SPEED_NUM_NONE,
> > + RTE_ETH_SPEED_NUM_10M,
> > + RTE_ETH_SPEED_NUM_100M,
> > + RTE_ETH_SPEED_NUM_1G,
> > + RTE_ETH_SPEED_NUM_2_5G,
> > + RTE_ETH_SPEED_NUM_5G,
> > + RTE_ETH_SPEED_NUM_10G,
> > + RTE_ETH_SPEED_NUM_20G,
> > + RTE_ETH_SPEED_NUM_25G,
> > + RTE_ETH_SPEED_NUM_40G,
> > + RTE_ETH_SPEED_NUM_50G,
> > + RTE_ETH_SPEED_NUM_56G,
> > + RTE_ETH_SPEED_NUM_100G,
> > + RTE_ETH_SPEED_NUM_200G
> > +};
> > +
> > static const uint64_t idpf_map_hena_rss[] = {
> > [IDPF_HASH_NONF_UNICAST_IPV4_UDP] =
> > RTE_ETH_RSS_NONFRAG_IPV4_UDP,
> > @@ -110,42 +127,22 @@ idpf_dev_link_update(struct rte_eth_dev *dev, {
> > struct idpf_vport *vport = dev->data->dev_private;
> > struct rte_eth_link new_link;
> > + unsigned int i;
> >
> > memset(&new_link, 0, sizeof(new_link));
> >
> > - switch (vport->link_speed) {
> > - case RTE_ETH_SPEED_NUM_10M:
> > - new_link.link_speed = RTE_ETH_SPEED_NUM_10M;
> > - break;
> > - case RTE_ETH_SPEED_NUM_100M:
> > - new_link.link_speed = RTE_ETH_SPEED_NUM_100M;
> > - break;
> > - case RTE_ETH_SPEED_NUM_1G:
> > - new_link.link_speed = RTE_ETH_SPEED_NUM_1G;
> > - break;
> > - case RTE_ETH_SPEED_NUM_10G:
> > - new_link.link_speed = RTE_ETH_SPEED_NUM_10G;
> > - break;
> > - case RTE_ETH_SPEED_NUM_20G:
> > - new_link.link_speed = RTE_ETH_SPEED_NUM_20G;
> > - break;
> > - case RTE_ETH_SPEED_NUM_25G:
> > - new_link.link_speed = RTE_ETH_SPEED_NUM_25G;
> > - break;
> > - case RTE_ETH_SPEED_NUM_40G:
> > - new_link.link_speed = RTE_ETH_SPEED_NUM_40G;
> > - break;
> > - case RTE_ETH_SPEED_NUM_50G:
> > - new_link.link_speed = RTE_ETH_SPEED_NUM_50G;
> > - break;
> > - case RTE_ETH_SPEED_NUM_100G:
> > - new_link.link_speed = RTE_ETH_SPEED_NUM_100G;
> > - break;
> > - case RTE_ETH_SPEED_NUM_200G:
> > - new_link.link_speed = RTE_ETH_SPEED_NUM_200G;
> > - break;
> > - default:
> > - new_link.link_speed = RTE_ETH_SPEED_NUM_NONE;
> > + for (i = 0; i < RTE_DIM(idpf_supported_speeds); i++) {
> > + if (vport->link_speed == idpf_supported_speeds[i]) {
> > + new_link.link_speed = vport->link_speed;
> > + break;
> > + }
> > + }
> > +
> > + if (i == RTE_DIM(idpf_supported_speeds)) {
> > + if (vport->link_up)
> > + new_link.link_speed =
> > RTE_ETH_SPEED_NUM_UNKNOWN;
> > + else
> > + new_link.link_speed = RTE_ETH_SPEED_NUM_NONE;
> > }
>
> What about
>
> /* initialize with default value */
> new_link.link_speed = vport->link_up ? RTE_ETH_SPEED_NUM_UNKNOWN :
> RTE_ETH_SPEED_NUM_NONE
>
> / * update in case a match */
> for (i = 0; i < RTE_DIM(idpf_supported_speeds); i++) {
> ....
> }
>
[Liu, Mingxia] Good idea, new patch has been sent.
> >
> > new_link.link_duplex = RTE_ETH_LINK_FULL_DUPLEX;
> > --
> > 2.34.1
