Fix a consistency issue in ixgbe, that when CRC stripping is enabled, the CRC bytes are not added to the rx total byte count. When CRC strip is disabled, these bytes are counted.
This patch reads the CRC strip register, and when enabled adds 4 bytes to the total bytes recieved counter for each received packet. E-mail discussion thread available: http://dpdk.org/ml/archives/dev/2015-March/015685.html To reproduce, run testpmd with no flags and with --crc-strip, sending a single packet, and notice that the RX byte counter is 4 bytes smaller when CRC stripping is enabled. Fixes: 29a05247ebad ("ixgbe: configure CRC stripping behaviour of PF") Reported-by: Stephen Hemminger <shemming at brocade.com> Suggested-by: Konstantin Ananyev <konstantin.ananyev at intel.com> Signed-off-by: Harry van Haaren <harry.van.haaren at intel.com> --- doc/guides/rel_notes/release_2_2.rst | 6 ++++++ drivers/net/ixgbe/ixgbe_ethdev.c | 7 +++++++ 2 files changed, 13 insertions(+) diff --git a/doc/guides/rel_notes/release_2_2.rst b/doc/guides/rel_notes/release_2_2.rst index 59dda59..6bab51b 100644 --- a/doc/guides/rel_notes/release_2_2.rst +++ b/doc/guides/rel_notes/release_2_2.rst @@ -134,6 +134,12 @@ Drivers VF needs the PF interrupt support initialized even if not started. +* **ixgbe: Fixed CRC strip enable influencing RX byte counters.** + + A workaround has been put in place to ensure consistent presentation + of total RX bytes. The CRC bytes are now always included in RX bytes, + providing consistency between RX and TX bytes. + * **i40e: Fixed base driver allocation when not using first numa node.** Fixed i40e issue that occurred when a DPDK application didn't initialize diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c index 0b0bbcf..b311ffb 100644 --- a/drivers/net/ixgbe/ixgbe_ethdev.c +++ b/drivers/net/ixgbe/ixgbe_ethdev.c @@ -2361,6 +2361,13 @@ ixgbe_read_stats_registers(struct ixgbe_hw *hw, struct ixgbe_hw_stats hw_stats->mrfc += IXGBE_READ_REG(hw, IXGBE_MRFC); hw_stats->rlec += IXGBE_READ_REG(hw, IXGBE_RLEC); + /* Workaround for RX byte count not including CRC bytes when CRC + * strip is enabled. Multiply rx_total_packets by CRC size and add + * to adjust rx_bytes to the correct value + */ + if (IXGBE_READ_REG(hw, IXGBE_HLREG0) & IXGBE_HLREG0_RXCRCSTRP) + *total_qbrc += (*total_qprc * 4); + /* Note that gprc counts missed packets */ hw_stats->gprc += IXGBE_READ_REG(hw, IXGBE_GPRC); -- 1.9.1