Rename remaining variable, comments and enums names
when generic usage is applicable. VRB1 is specific to
current HW support and VRB is more generic.

Signed-off-by: Nicolas Chautru <nicolas.chau...@intel.com>
---
 drivers/baseband/acc/acc_common.h             |  12 +-
 drivers/baseband/acc/rte_acc100_pmd.c         |   4 +-
 drivers/baseband/acc/rte_vrb_pmd.c            | 352 +++++++++---------
 .../acc/{acc200_pf_enum.h => vrb1_pf_enum.h}  |   8 +-
 .../acc/{acc200_vf_enum.h => vrb1_vf_enum.h}  |   8 +-
 drivers/baseband/acc/vrb_cfg.h                |  10 +-
 drivers/baseband/acc/vrb_pmd.h                | 139 +++----
 7 files changed, 265 insertions(+), 268 deletions(-)
 rename drivers/baseband/acc/{acc200_pf_enum.h => vrb1_pf_enum.h} (97%)
 rename drivers/baseband/acc/{acc200_vf_enum.h => vrb1_vf_enum.h} (96%)

diff --git a/drivers/baseband/acc/acc_common.h 
b/drivers/baseband/acc/acc_common.h
index 4ca5d704e6..5bb00746c3 100644
--- a/drivers/baseband/acc/acc_common.h
+++ b/drivers/baseband/acc/acc_common.h
@@ -285,13 +285,13 @@ struct __rte_packed acc_fcw_ld {
                hcin_decomp_mode:3,
                llr_pack_mode:1,
                hcout_comp_mode:3,
-               saturate_input:1, /* Not supported in ACC200 */
+               saturate_input:1, /* Not supported in VRB1 */
                dec_convllr:4,
                hcout_convllr:4;
        uint32_t itmax:7,
                itstop:1,
                so_it:7,
-               minsum_offset:1,  /* Not supported in ACC200 */
+               minsum_offset:1,  /* Not supported in VRB1 */
                hcout_offset:16;
        uint32_t hcout_size0:16,
                hcout_size1:16;
@@ -301,7 +301,7 @@ struct __rte_packed acc_fcw_ld {
        uint32_t negstop_it:7,
                negstop_en:1,
                tb_crc_select:2, /* Not supported in ACC100 */
-               dec_llrclip:2,  /* Not supported in ACC200 */
+               dec_llrclip:2,  /* Not supported in VRB1 */
                tb_trailer_size:20; /* Not supported in ACC100 */
 };
 
@@ -322,7 +322,7 @@ struct __rte_packed acc_fcw_fft {
                dft_shift:8,
                cs_multiplier:16;
        uint32_t bypass:2,
-               fp16_in:1, /* Not supported in ACC200 */
+               fp16_in:1, /* Not supported in VRB1 */
                fp16_out:1,
                exp_adj:4,
                power_shift:4,
@@ -398,7 +398,7 @@ struct __rte_packed acc_dma_req_desc {
                                sdone_enable:1,
                                irq_enable:1,
                                timeStampEn:1,
-                               dltb:1, /* Not supported in ACC200 */
+                               dltb:1, /* Not supported in VRB1 */
                                res0:4,
                                numCBs:8,
                                m2dlen:4,
@@ -1118,7 +1118,7 @@ cmp_ldpc_dec_op(struct rte_bbdev_dec_op **ops) {
  * @param op_flags
  *   Store information about device capabilities
  * @param next_triplet
- *   Index for ACC200 DMA Descriptor triplet
+ *   Index for VRB1 DMA Descriptor triplet
  * @param scattergather
  *   Flag to support scatter-gather for the mbuf
  *
diff --git a/drivers/baseband/acc/rte_acc100_pmd.c 
b/drivers/baseband/acc/rte_acc100_pmd.c
index e5fe27a06b..8b02f66ac2 100644
--- a/drivers/baseband/acc/rte_acc100_pmd.c
+++ b/drivers/baseband/acc/rte_acc100_pmd.c
@@ -262,7 +262,7 @@ acc100_check_ir(struct acc_device *acc100_dev)
                                ring_data->int_nb >
                                ACC100_PF_INT_DMA_DL5G_DESC_IRQ)) {
                        rte_bbdev_log(WARNING, "InfoRing: ITR:%d Info:0x%x",
-                               ring_data->int_nb, ring_data->detailed_info);
+                                       ring_data->int_nb, 
ring_data->detailed_info);
                        /* Initialize Info Ring entry and move forward */
                        ring_data->val = 0;
                }
@@ -5206,5 +5206,5 @@ rte_acc_configure(const char *dev_name, struct 
rte_acc_conf *conf)
        else if (pci_dev->id.device_id == ACC101_PF_DEVICE_ID)
                return acc101_configure(dev_name, conf);
        else
-               return acc200_configure(dev_name, conf);
+               return vrb1_configure(dev_name, conf);
 }
diff --git a/drivers/baseband/acc/rte_vrb_pmd.c 
b/drivers/baseband/acc/rte_vrb_pmd.c
index c590ce5988..34e42d1f6e 100644
--- a/drivers/baseband/acc/rte_vrb_pmd.c
+++ b/drivers/baseband/acc/rte_vrb_pmd.c
@@ -29,7 +29,7 @@ RTE_LOG_REGISTER_DEFAULT(vrb_logtype, NOTICE);
 
 /* Calculate the offset of the enqueue register. */
 static inline uint32_t
-acc200_queue_offset(bool pf_device, uint8_t vf_id, uint8_t qgrp_id, uint16_t 
aq_id)
+vrb1_queue_offset(bool pf_device, uint8_t vf_id, uint8_t qgrp_id, uint16_t 
aq_id)
 {
        if (pf_device)
                return ((vf_id << 12) + (qgrp_id << 7) + (aq_id << 3) + 
VRB1_PfQmgrIngressAq);
@@ -43,10 +43,10 @@ enum {UL_4G = 0, UL_5G, DL_4G, DL_5G, FFT, NUM_ACC};
 static inline int
 accFromQgid(int qg_idx, const struct rte_acc_conf *acc_conf)
 {
-       int accQg[ACC200_NUM_QGRPS];
+       int accQg[VRB_MAX_QGRPS];
        int NumQGroupsPerFn[NUM_ACC];
        int acc, qgIdx, qgIndex = 0;
-       for (qgIdx = 0; qgIdx < ACC200_NUM_QGRPS; qgIdx++)
+       for (qgIdx = 0; qgIdx < VRB_MAX_QGRPS; qgIdx++)
                accQg[qgIdx] = 0;
        NumQGroupsPerFn[UL_4G] = acc_conf->q_ul_4g.num_qgroups;
        NumQGroupsPerFn[UL_5G] = acc_conf->q_ul_5g.num_qgroups;
@@ -193,8 +193,8 @@ fetch_acc_config(struct rte_bbdev *dev)
        uint32_t reg_aq, reg_len0, reg_len1, reg0, reg1;
        uint32_t reg_mode, idx;
        struct rte_acc_queue_topology *q_top = NULL;
-       int qman_func_id[ACC200_NUM_ACCS] = {ACC_ACCMAP_0, ACC_ACCMAP_1,
-                       ACC_ACCMAP_2, ACC_ACCMAP_3, ACC_ACCMAP_4};
+       int qman_func_id[VRB_NUM_ACCS] = {ACC_ACCMAP_0, ACC_ACCMAP_1,
+                       ACC_ACCMAP_2, ACC_ACCMAP_3, ACC_ACCMAP_4, ACC_ACCMAP_5};
 
        /* No need to retrieve the configuration is already done. */
        if (d->configured)
@@ -220,9 +220,8 @@ fetch_acc_config(struct rte_bbdev *dev)
                        if (qg < ACC_NUM_QGRPS_PER_WORD)
                                idx = (reg0 >> (qg * 4)) & 0x7;
                        else
-                               idx = (reg1 >> ((qg -
-                                       ACC_NUM_QGRPS_PER_WORD) * 4)) & 0x7;
-                       if (idx < ACC200_NUM_ACCS) {
+                               idx = (reg1 >> ((qg - ACC_NUM_QGRPS_PER_WORD) * 
4)) & 0x7;
+                       if (idx < VRB1_NUM_ACCS) {
                                acc = qman_func_id[idx];
                                updateQtop(acc, qg, acc_conf, d);
                        }
@@ -290,8 +289,8 @@ vrb_device_status(struct rte_bbdev *dev)
 
        vrb_vf2pf(d, ACC_VF2PF_STATUS_REQUEST);
        reg = acc_reg_read(d, d->reg_addr->pf2vf_doorbell);
-       while ((time_out < ACC200_STATUS_TO) && (reg == 
RTE_BBDEV_DEV_NOSTATUS)) {
-               usleep(ACC200_STATUS_WAIT); /*< Wait or VF->PF->VF Comms */
+       while ((time_out < ACC_STATUS_TO) && (reg == RTE_BBDEV_DEV_NOSTATUS)) {
+               usleep(ACC_STATUS_WAIT); /*< Wait or VF->PF->VF Comms */
                reg = acc_reg_read(d, d->reg_addr->pf2vf_doorbell);
                time_out++;
        }
@@ -301,43 +300,43 @@ vrb_device_status(struct rte_bbdev *dev)
 
 /* Checks PF Info Ring to find the interrupt cause and handles it accordingly. 
*/
 static inline void
-vrb_check_ir(struct acc_device *acc200_dev)
+vrb_check_ir(struct acc_device *acc_dev)
 {
        volatile union acc_info_ring_data *ring_data;
-       uint16_t info_ring_head = acc200_dev->info_ring_head;
-       if (unlikely(acc200_dev->info_ring == NULL))
+       uint16_t info_ring_head = acc_dev->info_ring_head;
+       if (unlikely(acc_dev->info_ring == NULL))
                return;
 
-       ring_data = acc200_dev->info_ring + (acc200_dev->info_ring_head & 
ACC_INFO_RING_MASK);
+       ring_data = acc_dev->info_ring + (acc_dev->info_ring_head & 
ACC_INFO_RING_MASK);
 
        while (ring_data->valid) {
                if ((ring_data->int_nb < ACC_PF_INT_DMA_DL_DESC_IRQ) || (
                                ring_data->int_nb > 
ACC_PF_INT_DMA_DL5G_DESC_IRQ)) {
                        rte_bbdev_log(WARNING, "InfoRing: ITR:%d Info:0x%x",
-                               ring_data->int_nb, ring_data->detailed_info);
+                                       ring_data->int_nb, 
ring_data->detailed_info);
                        /* Initialize Info Ring entry and move forward. */
                        ring_data->val = 0;
                }
                info_ring_head++;
-               ring_data = acc200_dev->info_ring + (info_ring_head & 
ACC_INFO_RING_MASK);
+               ring_data = acc_dev->info_ring + (info_ring_head & 
ACC_INFO_RING_MASK);
        }
 }
 
-/* Interrupt handler triggered by ACC200 dev for handling specific interrupt. 
*/
+/* Interrupt handler triggered by dev for handling specific interrupt. */
 static void
 vrb_dev_interrupt_handler(void *cb_arg)
 {
        struct rte_bbdev *dev = cb_arg;
-       struct acc_device *acc200_dev = dev->data->dev_private;
+       struct acc_device *acc_dev = dev->data->dev_private;
        volatile union acc_info_ring_data *ring_data;
        struct acc_deq_intr_details deq_intr_det;
 
-       ring_data = acc200_dev->info_ring + (acc200_dev->info_ring_head & 
ACC_INFO_RING_MASK);
+       ring_data = acc_dev->info_ring + (acc_dev->info_ring_head & 
ACC_INFO_RING_MASK);
 
        while (ring_data->valid) {
-               if (acc200_dev->pf_device) {
+               if (acc_dev->pf_device) {
                        rte_bbdev_log_debug(
-                                       "ACC200 PF Interrupt received, Info 
Ring data: 0x%x -> %d",
+                                       "VRB1 PF Interrupt received, Info Ring 
data: 0x%x -> %d",
                                        ring_data->val, ring_data->int_nb);
 
                        switch (ring_data->int_nb) {
@@ -365,7 +364,7 @@ vrb_dev_interrupt_handler(void *cb_arg)
                        }
                } else {
                        rte_bbdev_log_debug(
-                                       "ACC200 VF Interrupt received, Info 
Ring data: 0x%x\n",
+                                       "VRB1 VF Interrupt received, Info Ring 
data: 0x%x\n",
                                        ring_data->val);
                        switch (ring_data->int_nb) {
                        case ACC_VF_INT_DMA_DL_DESC_IRQ:
@@ -395,9 +394,9 @@ vrb_dev_interrupt_handler(void *cb_arg)
 
                /* Initialize Info Ring entry and move forward. */
                ring_data->val = 0;
-               ++acc200_dev->info_ring_head;
-               ring_data = acc200_dev->info_ring +
-                               (acc200_dev->info_ring_head & 
ACC_INFO_RING_MASK);
+               ++acc_dev->info_ring_head;
+               ring_data = acc_dev->info_ring +
+                               (acc_dev->info_ring_head & ACC_INFO_RING_MASK);
        }
 }
 
@@ -429,7 +428,7 @@ allocate_info_ring(struct rte_bbdev *dev)
        phys_low  = (uint32_t)(info_ring_iova);
        acc_reg_write(d, d->reg_addr->info_ring_hi, phys_high);
        acc_reg_write(d, d->reg_addr->info_ring_lo, phys_low);
-       acc_reg_write(d, d->reg_addr->info_ring_en, ACC200_REG_IRQ_EN_ALL);
+       acc_reg_write(d, d->reg_addr->info_ring_en, VRB1_REG_IRQ_EN_ALL);
        d->info_ring_head = (acc_reg_read(d, d->reg_addr->info_ring_ptr) &
                        0xFFF) / sizeof(union acc_info_ring_data);
        return 0;
@@ -477,14 +476,14 @@ vrb_setup_queues(struct rte_bbdev *dev, uint16_t 
num_queues, int socket_id)
                return -ENOMEM;
        }
 
-       /* Configure ACC200 with the base address for DMA descriptor rings.
+       /* Configure device with the base address for DMA descriptor rings.
         * Same descriptor rings used for UL and DL DMA Engines.
         * Note : Assuming only VF0 bundle is used for PF mode.
         */
        phys_high = (uint32_t)(d->sw_rings_iova >> 32);
        phys_low  = (uint32_t)(d->sw_rings_iova & ~(ACC_SIZE_64MBYTE-1));
 
-       /* Read the populated cfg from ACC200 registers. */
+       /* Read the populated cfg from device registers. */
        fetch_acc_config(dev);
 
        /* Start Pmon */
@@ -568,7 +567,7 @@ vrb_setup_queues(struct rte_bbdev *dev, uint16_t 
num_queues, int socket_id)
        vrb_vf2pf(d, ACC_VF2PF_USING_VF);
 
        rte_bbdev_log_debug(
-                       "ACC200 (%s) configured  sw_rings = %p, sw_rings_iova = 
%#"
+                       "Device (%s) configured  sw_rings = %p, sw_rings_iova = 
%#"
                        PRIx64, dev->data->name, d->sw_rings, d->sw_rings_iova);
        return 0;
 
@@ -621,7 +620,7 @@ vrb_intr_enable(struct rte_bbdev *dev)
                return 0;
        } else if (rte_intr_type_get(dev->intr_handle) == 
RTE_INTR_HANDLE_VFIO_MSIX) {
                int i, max_queues;
-               struct acc_device *acc200_dev = dev->data->dev_private;
+               struct acc_device *acc_dev = dev->data->dev_private;
 
                ret = allocate_info_ring(dev);
                if (ret < 0) {
@@ -631,10 +630,10 @@ vrb_intr_enable(struct rte_bbdev *dev)
                        return ret;
                }
 
-               if (acc200_dev->pf_device)
-                       max_queues = ACC200_MAX_PF_MSIX;
+               if (acc_dev->pf_device)
+                       max_queues = VRB1_MAX_PF_MSIX;
                else
-                       max_queues = ACC200_MAX_VF_MSIX;
+                       max_queues = VRB1_MAX_VF_MSIX;
 
                if (rte_intr_efd_enable(dev->intr_handle, max_queues)) {
                        rte_bbdev_log(ERR, "Failed to create fds for %u queues",
@@ -677,7 +676,7 @@ vrb_intr_enable(struct rte_bbdev *dev)
                return 0;
        }
 
-       rte_bbdev_log(ERR, "ACC200 (%s) supports only VFIO MSI/MSI-X 
interrupts\n",
+       rte_bbdev_log(ERR, "Device (%s) supports only VFIO MSI/MSI-X 
interrupts\n",
                        dev->data->name);
        return -ENOTSUP;
 }
@@ -704,7 +703,7 @@ vrb_dev_close(struct rte_bbdev *dev)
 }
 
 /**
- * Report a ACC200 queue index which is free.
+ * Report a queue index which is free.
  * Return 0 to 16k for a valid queue_idx or -1 when no queue is available.
  * Note : Only supporting VF0 Bundle for PF mode.
  */
@@ -736,7 +735,7 @@ vrb_find_free_queue_idx(struct rte_bbdev *dev,
                        /* Mark the Queue as assigned. */
                        d->q_assigned_bit_map[group_idx] |= (1ULL << aq_idx);
                        /* Report the AQ Index. */
-                       return (group_idx << ACC200_GRP_ID_SHIFT) + aq_idx;
+                       return (group_idx << VRB1_GRP_ID_SHIFT) + aq_idx;
                }
        }
        rte_bbdev_log(INFO, "Failed to find free queue on %s, priority %u",
@@ -744,7 +743,7 @@ vrb_find_free_queue_idx(struct rte_bbdev *dev,
        return -1;
 }
 
-/* Setup ACC200 queue. */
+/* Setup device queue. */
 static int
 vrb_queue_setup(struct rte_bbdev *dev, uint16_t queue_id,
                const struct rte_bbdev_queue_conf *conf)
@@ -774,9 +773,9 @@ vrb_queue_setup(struct rte_bbdev *dev, uint16_t queue_id,
        union acc_dma_desc *desc = NULL;
        unsigned int desc_idx, b_idx;
        int fcw_len = (conf->op_type == RTE_BBDEV_OP_LDPC_ENC ?
-               ACC_FCW_LE_BLEN : (conf->op_type == RTE_BBDEV_OP_TURBO_DEC ?
-               ACC_FCW_TD_BLEN : (conf->op_type == RTE_BBDEV_OP_LDPC_DEC ?
-               ACC_FCW_LD_BLEN : ACC_FCW_FFT_BLEN)));
+                       ACC_FCW_LE_BLEN : (conf->op_type == 
RTE_BBDEV_OP_TURBO_DEC ?
+                       ACC_FCW_TD_BLEN : (conf->op_type == 
RTE_BBDEV_OP_LDPC_DEC ?
+                       ACC_FCW_LD_BLEN : ACC_FCW_FFT_BLEN)));
 
        for (desc_idx = 0; desc_idx < d->sw_ring_max_depth; desc_idx++) {
                desc = q->ring_addr + desc_idx;
@@ -790,8 +789,7 @@ vrb_queue_setup(struct rte_bbdev *dev, uint16_t queue_id,
                desc->req.data_ptrs[0].blkid = ACC_DMA_BLKID_FCW;
                desc->req.data_ptrs[0].last = 0;
                desc->req.data_ptrs[0].dma_ext = 0;
-               for (b_idx = 1; b_idx < ACC_DMA_MAX_NUM_POINTERS - 1;
-                               b_idx++) {
+               for (b_idx = 1; b_idx < ACC_DMA_MAX_NUM_POINTERS - 1; b_idx++) {
                        desc->req.data_ptrs[b_idx].blkid = ACC_DMA_BLKID_IN;
                        desc->req.data_ptrs[b_idx].last = 1;
                        desc->req.data_ptrs[b_idx].dma_ext = 0;
@@ -856,8 +854,8 @@ vrb_queue_setup(struct rte_bbdev *dev, uint16_t queue_id,
                goto free_companion_ring_addr;
        }
 
-       q->qgrp_id = (q_idx >> ACC200_GRP_ID_SHIFT) & 0xF;
-       q->vf_id = (q_idx >> ACC200_VF_ID_SHIFT)  & 0x3F;
+       q->qgrp_id = (q_idx >> VRB1_GRP_ID_SHIFT) & 0xF;
+       q->vf_id = (q_idx >> VRB1_VF_ID_SHIFT)  & 0x3F;
        q->aq_id = q_idx & 0xF;
        q->aq_depth = 0;
        if (conf->op_type ==  RTE_BBDEV_OP_TURBO_DEC)
@@ -872,8 +870,7 @@ vrb_queue_setup(struct rte_bbdev *dev, uint16_t queue_id,
                q->aq_depth = (1 << d->acc_conf.q_fft.aq_depth_log2);
 
        q->mmio_reg_enqueue = RTE_PTR_ADD(d->mmio_base,
-                       d->queue_offset(d->pf_device,
-                                       q->vf_id, q->qgrp_id, q->aq_id));
+                       d->queue_offset(d->pf_device, q->vf_id, q->qgrp_id, 
q->aq_id));
 
        rte_bbdev_log_debug(
                        "Setup dev%u q%u: qgrp_id=%u, vf_id=%u, aq_id=%u, 
aq_depth=%u, mmio_reg_enqueue=%p base %p\n",
@@ -930,7 +927,7 @@ vrb_print_op(struct rte_bbdev_dec_op *op, enum 
rte_bbdev_op_type op_type,
        }
 }
 
-/* Stop ACC200 queue and clear counters. */
+/* Stop queue and clear counters. */
 static int
 vrb_queue_stop(struct rte_bbdev *dev, uint16_t queue_id)
 {
@@ -958,7 +955,7 @@ vrb_queue_stop(struct rte_bbdev *dev, uint16_t queue_id)
        return 0;
 }
 
-/* Release ACC200 queue. */
+/* Release queue. */
 static int
 vrb_queue_release(struct rte_bbdev *dev, uint16_t q_id)
 {
@@ -978,14 +975,13 @@ vrb_queue_release(struct rte_bbdev *dev, uint16_t q_id)
        return 0;
 }
 
-/* Get ACC200 device info. */
+/* Get device info. */
 static void
-vrb_dev_info_get(struct rte_bbdev *dev,
-               struct rte_bbdev_driver_info *dev_info)
+vrb_dev_info_get(struct rte_bbdev *dev, struct rte_bbdev_driver_info *dev_info)
 {
        struct acc_device *d = dev->data->dev_private;
        int i;
-       static const struct rte_bbdev_op_cap bbdev_capabilities[] = {
+       static const struct rte_bbdev_op_cap vrb1_bbdev_capabilities[] = {
                {
                        .type = RTE_BBDEV_OP_TURBO_DEC,
                        .cap.turbo_dec = {
@@ -1091,7 +1087,7 @@ vrb_dev_info_get(struct rte_bbdev *dev,
 
        dev_info->driver_name = dev->device->driver->name;
 
-       /* Read and save the populated config from ACC200 registers. */
+       /* Read and save the populated config from registers. */
        fetch_acc_config(dev);
        /* Check the status of device. */
        dev_info->device_status = vrb_device_status(dev);
@@ -1125,7 +1121,7 @@ vrb_dev_info_get(struct rte_bbdev *dev,
        dev_info->default_queue_conf = default_queue_conf;
        dev_info->cpu_flag_reqs = NULL;
        dev_info->min_alignment = 1;
-       dev_info->capabilities = bbdev_capabilities;
+       dev_info->capabilities = vrb1_bbdev_capabilities;
        dev_info->harq_buffer_size = 0;
 
        vrb_check_ir(d);
@@ -1169,18 +1165,18 @@ static const struct rte_bbdev_ops vrb_bbdev_ops = {
        .queue_intr_disable = vrb_queue_intr_disable
 };
 
-/* ACC200 PCI PF address map. */
-static struct rte_pci_id pci_id_acc200_pf_map[] = {
+/* PCI PF address map. */
+static struct rte_pci_id pci_id_vrb_pf_map[] = {
        {
-               RTE_PCI_DEVICE(RTE_ACC200_VENDOR_ID, RTE_ACC200_PF_DEVICE_ID)
+               RTE_PCI_DEVICE(RTE_VRB1_VENDOR_ID, RTE_VRB1_PF_DEVICE_ID)
        },
        {.device_id = 0},
 };
 
-/* ACC200 PCI VF address map. */
-static struct rte_pci_id pci_id_acc200_vf_map[] = {
+/* PCI VF address map. */
+static struct rte_pci_id pci_id_vrb_vf_map[] = {
        {
-               RTE_PCI_DEVICE(RTE_ACC200_VENDOR_ID, RTE_ACC200_VF_DEVICE_ID)
+               RTE_PCI_DEVICE(RTE_VRB1_VENDOR_ID, RTE_VRB1_VF_DEVICE_ID)
        },
        {.device_id = 0},
 };
@@ -1250,7 +1246,7 @@ vrb_fcw_td_fill(const struct rte_bbdev_dec_op *op, struct 
acc_fcw_td *fcw)
 
 /* Fill in a frame control word for LDPC decoding. */
 static inline void
-acc200_fcw_ld_fill(struct rte_bbdev_dec_op *op, struct acc_fcw_ld *fcw,
+vrb1_fcw_ld_fill(struct rte_bbdev_dec_op *op, struct acc_fcw_ld *fcw,
                union acc_harq_layout_data *harq_layout)
 {
        uint16_t harq_out_length, harq_in_length, ncb_p, k0_p, parity_offset;
@@ -1345,7 +1341,7 @@ acc200_fcw_ld_fill(struct rte_bbdev_dec_op *op, struct 
acc_fcw_ld *fcw,
         */
        if (fcw->hcout_en > 0) {
                parity_offset = (op->ldpc_dec.basegraph == 1 ? 20 : 8)
-                       * op->ldpc_dec.z_c - op->ldpc_dec.n_filler;
+                               * op->ldpc_dec.z_c - op->ldpc_dec.n_filler;
                k0_p = (fcw->k0 > parity_offset) ? fcw->k0 - 
op->ldpc_dec.n_filler : fcw->k0;
                ncb_p = fcw->ncb - op->ldpc_dec.n_filler;
                l = k0_p + fcw->rm_e;
@@ -1371,7 +1367,7 @@ acc200_fcw_ld_fill(struct rte_bbdev_dec_op *op, struct 
acc_fcw_ld *fcw,
 }
 
 static inline int
-acc200_dma_desc_td_fill(struct rte_bbdev_dec_op *op,
+vrb_dma_desc_td_fill(struct rte_bbdev_dec_op *op,
                struct acc_dma_req_desc *desc, struct rte_mbuf **input,
                struct rte_mbuf *h_output, struct rte_mbuf *s_output,
                uint32_t *in_offset, uint32_t *h_out_offset,
@@ -1487,7 +1483,7 @@ acc200_dma_desc_td_fill(struct rte_bbdev_dec_op *op,
 }
 
 static inline int
-acc200_dma_desc_ld_fill(struct rte_bbdev_dec_op *op,
+vrb1_dma_desc_ld_fill(struct rte_bbdev_dec_op *op,
                struct acc_dma_req_desc *desc,
                struct rte_mbuf **input, struct rte_mbuf *h_output,
                uint32_t *in_offset, uint32_t *h_out_offset,
@@ -1646,7 +1642,7 @@ vrb_dma_desc_ld_update(struct rte_bbdev_dec_op *op,
        desc->op_addr = op;
 }
 
-/* Enqueue one encode operations for ACC200 device in CB mode */
+/* Enqueue one encode operations for device in CB mode */
 static inline int
 enqueue_enc_one_op_cb(struct acc_queue *q, struct rte_bbdev_enc_op *op,
                uint16_t total_enqueued_cbs)
@@ -1685,7 +1681,7 @@ enqueue_enc_one_op_cb(struct acc_queue *q, struct 
rte_bbdev_enc_op *op,
        return 1;
 }
 
-/* Enqueue one encode operations for ACC200 device in CB mode
+/* Enqueue one encode operations for device in CB mode
  * multiplexed on the same descriptor.
  */
 static inline int
@@ -1744,11 +1740,11 @@ enqueue_ldpc_enc_n_op_cb(struct acc_queue *q, struct 
rte_bbdev_enc_op **ops,
        return num;
 }
 
-/* Enqueue one encode operations for ACC200 device for a partial TB
+/* Enqueue one encode operations for device for a partial TB
  * all codes blocks have same configuration multiplexed on the same descriptor.
  */
 static inline void
-vrb_enqueue_ldpc_enc_part_tb(struct acc_queue *q, struct rte_bbdev_enc_op *op,
+vrb1_enqueue_ldpc_enc_part_tb(struct acc_queue *q, struct rte_bbdev_enc_op *op,
                uint16_t total_enqueued_descs, int16_t num_cbs, uint32_t e,
                uint16_t in_len_B, uint32_t out_len_B, uint32_t *in_offset,
                uint32_t *out_offset)
@@ -1794,7 +1790,7 @@ vrb_enqueue_ldpc_enc_part_tb(struct acc_queue *q, struct 
rte_bbdev_enc_op *op,
 
 }
 
-/* Enqueue one encode operations for ACC200 device in TB mode. */
+/* Enqueue one encode operations for device in TB mode. */
 static inline int
 enqueue_enc_one_op_tb(struct acc_queue *q, struct rte_bbdev_enc_op *op,
                uint16_t total_enqueued_cbs, uint8_t cbs_in_tb)
@@ -1864,11 +1860,11 @@ enqueue_enc_one_op_tb(struct acc_queue *q, struct 
rte_bbdev_enc_op *op,
        return current_enqueued_cbs;
 }
 
-/* Enqueue one encode operations for ACC200 device in TB mode.
+/* Enqueue one encode operations for device in TB mode.
  * returns the number of descs used.
  */
 static inline int
-vrb_enqueue_ldpc_enc_one_op_tb(struct acc_queue *q, struct rte_bbdev_enc_op 
*op,
+vrb1_enqueue_ldpc_enc_one_op_tb(struct acc_queue *q, struct rte_bbdev_enc_op 
*op,
                uint16_t enq_descs, uint8_t cbs_in_tb)
 {
        uint8_t num_a, num_b;
@@ -1897,7 +1893,7 @@ vrb_enqueue_ldpc_enc_one_op_tb(struct acc_queue *q, 
struct rte_bbdev_enc_op *op,
                uint32_t out_len_B = (e + 7) >> 3;
                uint8_t enq = RTE_MIN(num_a, ACC_MUX_5GDL_DESC);
                num_a -= enq;
-               vrb_enqueue_ldpc_enc_part_tb(q, op, enq_descs, enq, e, 
input_len_B,
+               vrb1_enqueue_ldpc_enc_part_tb(q, op, enq_descs, enq, e, 
input_len_B,
                                out_len_B, &in_offset, &out_offset);
                enq_descs++;
        }
@@ -1906,7 +1902,7 @@ vrb_enqueue_ldpc_enc_one_op_tb(struct acc_queue *q, 
struct rte_bbdev_enc_op *op,
                uint32_t out_len_B = (e + 7) >> 3;
                uint8_t enq = RTE_MIN(num_b, ACC_MUX_5GDL_DESC);
                num_b -= enq;
-               vrb_enqueue_ldpc_enc_part_tb(q, op, enq_descs, enq, e, 
input_len_B,
+               vrb1_enqueue_ldpc_enc_part_tb(q, op, enq_descs, enq, e, 
input_len_B,
                                out_len_B, &in_offset, &out_offset);
                enq_descs++;
        }
@@ -1924,7 +1920,7 @@ vrb_enqueue_ldpc_enc_one_op_tb(struct acc_queue *q, 
struct rte_bbdev_enc_op *op,
        return return_descs;
 }
 
-/** Enqueue one decode operations for ACC200 device in CB mode. */
+/** Enqueue one decode operations for device in CB mode. */
 static inline int
 enqueue_dec_one_op_cb(struct acc_queue *q, struct rte_bbdev_dec_op *op,
                uint16_t total_enqueued_cbs)
@@ -1952,7 +1948,7 @@ enqueue_dec_one_op_cb(struct acc_queue *q, struct 
rte_bbdev_dec_op *op,
        /* Set up DMA descriptor */
        desc = acc_desc(q, total_enqueued_cbs);
 
-       ret = acc200_dma_desc_td_fill(op, &desc->req, &input, h_output,
+       ret = vrb_dma_desc_td_fill(op, &desc->req, &input, h_output,
                        s_output, &in_offset, &h_out_offset, &s_out_offset,
                        &h_out_length, &s_out_length, &mbuf_total_left,
                        &seg_total_left, 0);
@@ -1977,7 +1973,7 @@ enqueue_dec_one_op_cb(struct acc_queue *q, struct 
rte_bbdev_dec_op *op,
        return 1;
 }
 
-/** Enqueue one decode operations for ACC200 device in CB mode */
+/** Enqueue one decode operations for device in CB mode */
 static inline int
 vrb_enqueue_ldpc_dec_one_op_cb(struct acc_queue *q, struct rte_bbdev_dec_op 
*op,
                uint16_t total_enqueued_cbs, bool same_op)
@@ -2022,7 +2018,7 @@ vrb_enqueue_ldpc_dec_one_op_cb(struct acc_queue *q, 
struct rte_bbdev_dec_op *op,
                struct acc_fcw_ld *fcw;
                uint32_t seg_total_left;
                fcw = &desc->req.fcw_ld;
-               acc200_fcw_ld_fill(op, fcw, harq_layout);
+               q->d->fcw_ld_fill(op, fcw, harq_layout);
 
                /* Special handling when using mbuf or not. */
                if (check_bit(op->ldpc_dec.op_flags,
@@ -2031,7 +2027,7 @@ vrb_enqueue_ldpc_dec_one_op_cb(struct acc_queue *q, 
struct rte_bbdev_dec_op *op,
                else
                        seg_total_left = fcw->rm_e;
 
-               ret = acc200_dma_desc_ld_fill(op, &desc->req, &input, h_output,
+               ret = vrb1_dma_desc_ld_fill(op, &desc->req, &input, h_output,
                                &in_offset, &h_out_offset,
                                &h_out_length, &mbuf_total_left,
                                &seg_total_left, fcw);
@@ -2066,7 +2062,7 @@ vrb_enqueue_ldpc_dec_one_op_cb(struct acc_queue *q, 
struct rte_bbdev_dec_op *op,
 }
 
 
-/* Enqueue one decode operations for ACC200 device in TB mode. */
+/* Enqueue one decode operations for device in TB mode. */
 static inline int
 vrb_enqueue_ldpc_dec_one_op_tb(struct acc_queue *q, struct rte_bbdev_dec_op 
*op,
                uint16_t total_enqueued_cbs, uint8_t cbs_in_tb)
@@ -2087,7 +2083,7 @@ vrb_enqueue_ldpc_dec_one_op_tb(struct acc_queue *q, 
struct rte_bbdev_dec_op *op,
        desc_first = desc;
        fcw_offset = (desc_idx << 8) + ACC_DESC_FCW_OFFSET;
        harq_layout = q->d->harq_layout;
-       acc200_fcw_ld_fill(op, &desc->req.fcw_ld, harq_layout);
+       q->d->fcw_ld_fill(op, &desc->req.fcw_ld, harq_layout);
 
        input = op->ldpc_dec.input.data;
        h_output_head = h_output = op->ldpc_dec.hard_output.data;
@@ -2117,7 +2113,7 @@ vrb_enqueue_ldpc_dec_one_op_tb(struct acc_queue *q, 
struct rte_bbdev_dec_op *op,
                rte_memcpy(&desc->req.fcw_ld, &desc_first->req.fcw_ld, 
ACC_FCW_LD_BLEN);
                desc->req.fcw_ld.tb_trailer_size = (c - r - 1) * trail_len;
 
-               ret = acc200_dma_desc_ld_fill(op, &desc->req, &input,
+               ret = vrb1_dma_desc_ld_fill(op, &desc->req, &input,
                                h_output, &in_offset, &h_out_offset,
                                &h_out_length,
                                &mbuf_total_left, &seg_total_left,
@@ -2159,7 +2155,7 @@ vrb_enqueue_ldpc_dec_one_op_tb(struct acc_queue *q, 
struct rte_bbdev_dec_op *op,
        return current_enqueued_cbs;
 }
 
-/* Enqueue one decode operations for ACC200 device in TB mode */
+/* Enqueue one decode operations for device in TB mode */
 static inline int
 enqueue_dec_one_op_tb(struct acc_queue *q, struct rte_bbdev_dec_op *op,
                uint16_t total_enqueued_cbs, uint8_t cbs_in_tb)
@@ -2198,7 +2194,7 @@ enqueue_dec_one_op_tb(struct acc_queue *q, struct 
rte_bbdev_dec_op *op,
                desc = acc_desc(q, total_enqueued_cbs);
                desc->req.data_ptrs[0].address = q->ring_addr_iova + fcw_offset;
                desc->req.data_ptrs[0].blen = ACC_FCW_TD_BLEN;
-               ret = acc200_dma_desc_td_fill(op, &desc->req, &input,
+               ret = vrb_dma_desc_td_fill(op, &desc->req, &input,
                                h_output, s_output, &in_offset, &h_out_offset,
                                &s_out_offset, &h_out_length, &s_out_length,
                                &mbuf_total_left, &seg_total_left, r);
@@ -2247,7 +2243,7 @@ enqueue_dec_one_op_tb(struct acc_queue *q, struct 
rte_bbdev_dec_op *op,
        return current_enqueued_cbs;
 }
 
-/* Enqueue encode operations for ACC200 device in CB mode. */
+/* Enqueue encode operations for device in CB mode. */
 static uint16_t
 vrb_enqueue_enc_cb(struct rte_bbdev_queue_data *q_data,
                struct rte_bbdev_enc_op **ops, uint16_t num)
@@ -2283,7 +2279,7 @@ vrb_enqueue_enc_cb(struct rte_bbdev_queue_data *q_data,
        return i;
 }
 
-/** Enqueue encode operations for ACC200 device in CB mode. */
+/** Enqueue encode operations for device in CB mode. */
 static inline uint16_t
 vrb_enqueue_ldpc_enc_cb(struct rte_bbdev_queue_data *q_data,
                struct rte_bbdev_enc_op **ops, uint16_t num)
@@ -2324,7 +2320,7 @@ vrb_enqueue_ldpc_enc_cb(struct rte_bbdev_queue_data 
*q_data,
        return i;
 }
 
-/* Enqueue encode operations for ACC200 device in TB mode. */
+/* Enqueue encode operations for device in TB mode. */
 static uint16_t
 vrb_enqueue_enc_tb(struct rte_bbdev_queue_data *q_data,
                struct rte_bbdev_enc_op **ops, uint16_t num)
@@ -2363,7 +2359,7 @@ vrb_enqueue_enc_tb(struct rte_bbdev_queue_data *q_data,
        return i;
 }
 
-/* Enqueue LDPC encode operations for ACC200 device in TB mode. */
+/* Enqueue LDPC encode operations for device in TB mode. */
 static uint16_t
 vrb_enqueue_ldpc_enc_tb(struct rte_bbdev_queue_data *q_data,
                struct rte_bbdev_enc_op **ops, uint16_t num)
@@ -2382,7 +2378,7 @@ vrb_enqueue_ldpc_enc_tb(struct rte_bbdev_queue_data 
*q_data,
                        break;
                }
 
-               descs_used = vrb_enqueue_ldpc_enc_one_op_tb(q, ops[i], 
enqueued_descs, cbs_in_tb);
+               descs_used = vrb1_enqueue_ldpc_enc_one_op_tb(q, ops[i], 
enqueued_descs, cbs_in_tb);
                if (descs_used < 0) {
                        acc_enqueue_invalid(q_data);
                        break;
@@ -2402,7 +2398,7 @@ vrb_enqueue_ldpc_enc_tb(struct rte_bbdev_queue_data 
*q_data,
        return i;
 }
 
-/* Enqueue encode operations for ACC200 device. */
+/* Enqueue encode operations for device. */
 static uint16_t
 vrb_enqueue_enc(struct rte_bbdev_queue_data *q_data,
                struct rte_bbdev_enc_op **ops, uint16_t num)
@@ -2416,7 +2412,7 @@ vrb_enqueue_enc(struct rte_bbdev_queue_data *q_data,
                return vrb_enqueue_enc_cb(q_data, ops, num);
 }
 
-/* Enqueue encode operations for ACC200 device. */
+/* Enqueue encode operations for device. */
 static uint16_t
 vrb_enqueue_ldpc_enc(struct rte_bbdev_queue_data *q_data,
                struct rte_bbdev_enc_op **ops, uint16_t num)
@@ -2431,7 +2427,7 @@ vrb_enqueue_ldpc_enc(struct rte_bbdev_queue_data *q_data,
 }
 
 
-/* Enqueue decode operations for ACC200 device in CB mode. */
+/* Enqueue decode operations for device in CB mode. */
 static uint16_t
 vrb_enqueue_dec_cb(struct rte_bbdev_queue_data *q_data,
                struct rte_bbdev_dec_op **ops, uint16_t num)
@@ -2464,7 +2460,7 @@ vrb_enqueue_dec_cb(struct rte_bbdev_queue_data *q_data,
        return i;
 }
 
-/* Enqueue decode operations for ACC200 device in TB mode. */
+/* Enqueue decode operations for device in TB mode. */
 static uint16_t
 vrb_enqueue_ldpc_dec_tb(struct rte_bbdev_queue_data *q_data,
                struct rte_bbdev_dec_op **ops, uint16_t num)
@@ -2498,7 +2494,7 @@ vrb_enqueue_ldpc_dec_tb(struct rte_bbdev_queue_data 
*q_data,
        return i;
 }
 
-/* Enqueue decode operations for ACC200 device in CB mode. */
+/* Enqueue decode operations for device in CB mode. */
 static uint16_t
 vrb_enqueue_ldpc_dec_cb(struct rte_bbdev_queue_data *q_data,
                struct rte_bbdev_dec_op **ops, uint16_t num)
@@ -2543,7 +2539,7 @@ vrb_enqueue_ldpc_dec_cb(struct rte_bbdev_queue_data 
*q_data,
 }
 
 
-/* Enqueue decode operations for ACC200 device in TB mode */
+/* Enqueue decode operations for device in TB mode. */
 static uint16_t
 vrb_enqueue_dec_tb(struct rte_bbdev_queue_data *q_data,
                struct rte_bbdev_dec_op **ops, uint16_t num)
@@ -2580,7 +2576,7 @@ vrb_enqueue_dec_tb(struct rte_bbdev_queue_data *q_data,
        return i;
 }
 
-/* Enqueue decode operations for ACC200 device. */
+/* Enqueue decode operations for device. */
 static uint16_t
 vrb_enqueue_dec(struct rte_bbdev_queue_data *q_data,
                struct rte_bbdev_dec_op **ops, uint16_t num)
@@ -2594,7 +2590,7 @@ vrb_enqueue_dec(struct rte_bbdev_queue_data *q_data,
                return vrb_enqueue_dec_cb(q_data, ops, num);
 }
 
-/* Enqueue decode operations for ACC200 device. */
+/* Enqueue decode operations for device. */
 static uint16_t
 vrb_enqueue_ldpc_dec(struct rte_bbdev_queue_data *q_data,
                struct rte_bbdev_dec_op **ops, uint16_t num)
@@ -2609,7 +2605,7 @@ vrb_enqueue_ldpc_dec(struct rte_bbdev_queue_data *q_data,
 }
 
 
-/* Dequeue one encode operations from ACC200 device in CB mode. */
+/* Dequeue one encode operations from device in CB mode. */
 static inline int
 vrb_dequeue_enc_one_op_cb(struct acc_queue *q, struct rte_bbdev_enc_op 
**ref_op,
                uint16_t *dequeued_ops, uint32_t *aq_dequeued, uint16_t 
*dequeued_descs)
@@ -2660,7 +2656,7 @@ vrb_dequeue_enc_one_op_cb(struct acc_queue *q, struct 
rte_bbdev_enc_op **ref_op,
        return desc->req.numCBs;
 }
 
-/* Dequeue one LDPC encode operations from ACC200 device in TB mode.
+/* Dequeue one LDPC encode operations from device in TB mode.
  * That operation may cover multiple descriptors.
  */
 static inline int
@@ -2725,7 +2721,7 @@ vrb_dequeue_enc_one_op_tb(struct acc_queue *q, struct 
rte_bbdev_enc_op **ref_op,
        return current_dequeued_descs;
 }
 
-/* Dequeue one decode operation from ACC200 device in CB mode. */
+/* Dequeue one decode operation from device in CB mode. */
 static inline int
 vrb_dequeue_dec_one_op_cb(struct rte_bbdev_queue_data *q_data,
                struct acc_queue *q, struct rte_bbdev_dec_op **ref_op,
@@ -2777,7 +2773,7 @@ vrb_dequeue_dec_one_op_cb(struct rte_bbdev_queue_data 
*q_data,
        return 1;
 }
 
-/* Dequeue one decode operations from ACC200 device in CB mode. */
+/* Dequeue one decode operations from device in CB mode. */
 static inline int
 vrb_dequeue_ldpc_dec_one_op_cb(struct rte_bbdev_queue_data *q_data,
                struct acc_queue *q, struct rte_bbdev_dec_op **ref_op,
@@ -2840,7 +2836,7 @@ vrb_dequeue_ldpc_dec_one_op_cb(struct 
rte_bbdev_queue_data *q_data,
        return 1;
 }
 
-/* Dequeue one decode operations from ACC200 device in TB mode. */
+/* Dequeue one decode operations from device in TB mode. */
 static inline int
 vrb_dequeue_dec_one_op_tb(struct acc_queue *q, struct rte_bbdev_dec_op 
**ref_op,
                uint16_t dequeued_cbs, uint32_t *aq_dequeued)
@@ -2920,7 +2916,7 @@ vrb_dequeue_dec_one_op_tb(struct acc_queue *q, struct 
rte_bbdev_dec_op **ref_op,
        return cb_idx;
 }
 
-/* Dequeue encode operations from ACC200 device. */
+/* Dequeue encode operations from device. */
 static uint16_t
 vrb_dequeue_enc(struct rte_bbdev_queue_data *q_data,
                struct rte_bbdev_enc_op **ops, uint16_t num)
@@ -2961,7 +2957,7 @@ vrb_dequeue_enc(struct rte_bbdev_queue_data *q_data,
        return dequeued_ops;
 }
 
-/* Dequeue LDPC encode operations from ACC200 device. */
+/* Dequeue LDPC encode operations from device. */
 static uint16_t
 vrb_dequeue_ldpc_enc(struct rte_bbdev_queue_data *q_data,
                struct rte_bbdev_enc_op **ops, uint16_t num)
@@ -3001,7 +2997,7 @@ vrb_dequeue_ldpc_enc(struct rte_bbdev_queue_data *q_data,
        return dequeued_ops;
 }
 
-/* Dequeue decode operations from ACC200 device. */
+/* Dequeue decode operations from device. */
 static uint16_t
 vrb_dequeue_dec(struct rte_bbdev_queue_data *q_data,
                struct rte_bbdev_dec_op **ops, uint16_t num)
@@ -3040,7 +3036,7 @@ vrb_dequeue_dec(struct rte_bbdev_queue_data *q_data,
        return i;
 }
 
-/* Dequeue decode operations from ACC200 device. */
+/* Dequeue decode operations from device. */
 static uint16_t
 vrb_dequeue_ldpc_dec(struct rte_bbdev_queue_data *q_data,
                struct rte_bbdev_dec_op **ops, uint16_t num)
@@ -3082,7 +3078,7 @@ vrb_dequeue_ldpc_dec(struct rte_bbdev_queue_data *q_data,
 
 /* Fill in a frame control word for FFT processing. */
 static inline void
-acc200_fcw_fft_fill(struct rte_bbdev_fft_op *op, struct acc_fcw_fft *fcw)
+vrb1_fcw_fft_fill(struct rte_bbdev_fft_op *op, struct acc_fcw_fft *fcw)
 {
        fcw->in_frame_size = op->fft.input_sequence_size;
        fcw->leading_pad_size = op->fft.input_leading_padding;
@@ -3114,7 +3110,7 @@ acc200_fcw_fft_fill(struct rte_bbdev_fft_op *op, struct 
acc_fcw_fft *fcw)
 }
 
 static inline int
-acc200_dma_desc_fft_fill(struct rte_bbdev_fft_op *op,
+vrb1_dma_desc_fft_fill(struct rte_bbdev_fft_op *op,
                struct acc_dma_req_desc *desc,
                struct rte_mbuf *input, struct rte_mbuf *output,
                uint32_t *in_offset, uint32_t *out_offset)
@@ -3147,7 +3143,7 @@ acc200_dma_desc_fft_fill(struct rte_bbdev_fft_op *op,
 }
 
 
-/** Enqueue one FFT operation for ACC200 device. */
+/** Enqueue one FFT operation for device. */
 static inline int
 vrb_enqueue_fft_one_op(struct acc_queue *q, struct rte_bbdev_fft_op *op,
                uint16_t total_enqueued_cbs)
@@ -3164,8 +3160,8 @@ vrb_enqueue_fft_one_op(struct acc_queue *q, struct 
rte_bbdev_fft_op *op,
        out_offset = op->fft.base_output.offset;
        fcw = &desc->req.fcw_fft;
 
-       acc200_fcw_fft_fill(op, fcw);
-       acc200_dma_desc_fft_fill(op, &desc->req, input, output, &in_offset, 
&out_offset);
+       vrb1_fcw_fft_fill(op, fcw);
+       vrb1_dma_desc_fft_fill(op, &desc->req, input, output, &in_offset, 
&out_offset);
 #ifdef RTE_LIBRTE_BBDEV_DEBUG
        rte_memdump(stderr, "FCW", &desc->req.fcw_fft,
                        sizeof(desc->req.fcw_fft));
@@ -3174,7 +3170,7 @@ vrb_enqueue_fft_one_op(struct acc_queue *q, struct 
rte_bbdev_fft_op *op,
        return 1;
 }
 
-/* Enqueue decode operations for ACC200 device. */
+/* Enqueue decode operations for device. */
 static uint16_t
 vrb_enqueue_fft(struct rte_bbdev_queue_data *q_data,
                struct rte_bbdev_fft_op **ops, uint16_t num)
@@ -3212,9 +3208,9 @@ vrb_enqueue_fft(struct rte_bbdev_queue_data *q_data,
 }
 
 
-/* Dequeue one FFT operations from ACC200 device. */
+/* Dequeue one FFT operations from device. */
 static inline int
-dequeue_fft_one_op(struct rte_bbdev_queue_data *q_data,
+vrb_dequeue_fft_one_op(struct rte_bbdev_queue_data *q_data,
                struct acc_queue *q, struct rte_bbdev_fft_op **ref_op,
                uint16_t dequeued_cbs, uint32_t *aq_dequeued)
 {
@@ -3261,7 +3257,7 @@ dequeue_fft_one_op(struct rte_bbdev_queue_data *q_data,
 }
 
 
-/* Dequeue FFT operations from ACC200 device. */
+/* Dequeue FFT operations from device. */
 static uint16_t
 vrb_dequeue_fft(struct rte_bbdev_queue_data *q_data,
                struct rte_bbdev_fft_op **ops, uint16_t num)
@@ -3275,7 +3271,7 @@ vrb_dequeue_fft(struct rte_bbdev_queue_data *q_data,
        dequeue_num = RTE_MIN(avail, num);
 
        for (i = 0; i < dequeue_num; ++i) {
-               ret = dequeue_fft_one_op(q_data, q, &ops[i], dequeued_cbs, 
&aq_dequeued);
+               ret = vrb_dequeue_fft_one_op(q_data, q, &ops[i], dequeued_cbs, 
&aq_dequeued);
                if (ret <= 0)
                        break;
                dequeued_cbs += ret;
@@ -3290,7 +3286,7 @@ vrb_dequeue_fft(struct rte_bbdev_queue_data *q_data,
 
 /* Initialization Function */
 static void
-acc200_bbdev_init(struct rte_bbdev *dev, struct rte_pci_driver *drv)
+vrb_bbdev_init(struct rte_bbdev *dev, struct rte_pci_driver *drv)
 {
        struct rte_pci_device *pci_dev = RTE_DEV_TO_PCI(dev->device);
        struct acc_device *d = dev->data->dev_private;
@@ -3307,21 +3303,21 @@ acc200_bbdev_init(struct rte_bbdev *dev, struct 
rte_pci_driver *drv)
        dev->enqueue_fft_ops = vrb_enqueue_fft;
        dev->dequeue_fft_ops = vrb_dequeue_fft;
 
-       d->pf_device = !strcmp(drv->driver.name, RTE_STR(ACC200PF_DRIVER_NAME));
+       d->pf_device = !strcmp(drv->driver.name, RTE_STR(VRB_PF_DRIVER_NAME));
        d->mmio_base = pci_dev->mem_resource[0].addr;
 
        /* Device variant specific handling. */
-       if ((pci_dev->id.device_id == RTE_ACC200_PF_DEVICE_ID) ||
-                       (pci_dev->id.device_id == RTE_ACC200_VF_DEVICE_ID)) {
-               d->device_variant = ACC200_VARIANT;
-               d->queue_offset = acc200_queue_offset;
-               d->fcw_ld_fill = acc200_fcw_ld_fill;
-               d->num_qgroups = ACC200_NUM_QGRPS;
-               d->num_aqs = ACC200_NUM_AQS;
+       if ((pci_dev->id.device_id == RTE_VRB1_PF_DEVICE_ID) ||
+                       (pci_dev->id.device_id == RTE_VRB1_VF_DEVICE_ID)) {
+               d->device_variant = VRB1_VARIANT;
+               d->queue_offset = vrb1_queue_offset;
+               d->fcw_ld_fill = vrb1_fcw_ld_fill;
+               d->num_qgroups = VRB1_NUM_QGRPS;
+               d->num_aqs = VRB1_NUM_AQS;
                if (d->pf_device)
-                       d->reg_addr = &acc200_pf_reg_addr;
+                       d->reg_addr = &vrb1_pf_reg_addr;
                else
-                       d->reg_addr = &acc200_vf_reg_addr;
+                       d->reg_addr = &vrb1_vf_reg_addr;
        }
 
        rte_bbdev_log_debug("Init device %s [%s] @ vaddr %p paddr %#"PRIx64"",
@@ -3366,38 +3362,38 @@ static int vrb_pci_probe(struct rte_pci_driver *pci_drv,
        bbdev->intr_handle = pci_dev->intr_handle;
        bbdev->data->socket_id = pci_dev->device.numa_node;
 
-       /* Invoke ACC200 device initialization function. */
-       acc200_bbdev_init(bbdev, pci_drv);
+       /* Invoke device initialization function. */
+       vrb_bbdev_init(bbdev, pci_drv);
 
        rte_bbdev_log_debug("Initialised bbdev %s (id = %u)",
                        dev_name, bbdev->data->dev_id);
        return 0;
 }
 
-static struct rte_pci_driver acc200_pci_pf_driver = {
+static struct rte_pci_driver vrb_pci_pf_driver = {
                .probe = vrb_pci_probe,
                .remove = acc_pci_remove,
-               .id_table = pci_id_acc200_pf_map,
+               .id_table = pci_id_vrb_pf_map,
                .drv_flags = RTE_PCI_DRV_NEED_MAPPING
 };
 
-static struct rte_pci_driver acc200_pci_vf_driver = {
+static struct rte_pci_driver vrb_pci_vf_driver = {
                .probe = vrb_pci_probe,
                .remove = acc_pci_remove,
-               .id_table = pci_id_acc200_vf_map,
+               .id_table = pci_id_vrb_vf_map,
                .drv_flags = RTE_PCI_DRV_NEED_MAPPING
 };
 
-RTE_PMD_REGISTER_PCI(ACC200PF_DRIVER_NAME, acc200_pci_pf_driver);
-RTE_PMD_REGISTER_PCI_TABLE(ACC200PF_DRIVER_NAME, pci_id_acc200_pf_map);
-RTE_PMD_REGISTER_PCI(ACC200VF_DRIVER_NAME, acc200_pci_vf_driver);
-RTE_PMD_REGISTER_PCI_TABLE(ACC200VF_DRIVER_NAME, pci_id_acc200_vf_map);
+RTE_PMD_REGISTER_PCI(VRB_PF_DRIVER_NAME, vrb_pci_pf_driver);
+RTE_PMD_REGISTER_PCI_TABLE(VRB_PF_DRIVER_NAME, pci_id_vrb_pf_map);
+RTE_PMD_REGISTER_PCI(VRB_VF_DRIVER_NAME, vrb_pci_vf_driver);
+RTE_PMD_REGISTER_PCI_TABLE(VRB_VF_DRIVER_NAME, pci_id_vrb_vf_map);
 
-/* Initial configuration of a ACC200 device prior to running configure(). */
+/* Initial configuration of a VRB1 device prior to running configure(). */
 int
-acc200_configure(const char *dev_name, struct rte_acc_conf *conf)
+vrb1_configure(const char *dev_name, struct rte_acc_conf *conf)
 {
-       rte_bbdev_log(INFO, "acc200_configure");
+       rte_bbdev_log(INFO, "vrb1_configure");
        uint32_t value, address, status;
        int qg_idx, template_idx, vf_idx, acc, i, rlim, alen, timestamp, 
totalQgs, numEngines;
        int numQgs, numQqsAcc;
@@ -3423,40 +3419,40 @@ acc200_configure(const char *dev_name, struct 
rte_acc_conf *conf)
        /* Check we are already out of PG. */
        status = acc_reg_read(d, VRB1_PfHiSectionPowerGatingAck);
        if (status > 0) {
-               if (status != ACC200_PG_MASK_0) {
+               if (status != VRB1_PG_MASK_0) {
                        rte_bbdev_log(ERR, "Unexpected status %x %x",
-                                       status, ACC200_PG_MASK_0);
+                                       status, VRB1_PG_MASK_0);
                        return -ENODEV;
                }
                /* Clock gate sections that will be un-PG. */
-               acc_reg_write(d, VRB1_PfHiClkGateHystReg, ACC200_CLK_DIS);
+               acc_reg_write(d, VRB1_PfHiClkGateHystReg, VRB1_CLK_DIS);
                /* Un-PG required sections. */
                acc_reg_write(d, VRB1_PfHiSectionPowerGatingReq,
-                               ACC200_PG_MASK_1);
+                               VRB1_PG_MASK_1);
                status = acc_reg_read(d, VRB1_PfHiSectionPowerGatingAck);
-               if (status != ACC200_PG_MASK_1) {
+               if (status != VRB1_PG_MASK_1) {
                        rte_bbdev_log(ERR, "Unexpected status %x %x",
-                                       status, ACC200_PG_MASK_1);
+                                       status, VRB1_PG_MASK_1);
                        return -ENODEV;
                }
                acc_reg_write(d, VRB1_PfHiSectionPowerGatingReq,
-                               ACC200_PG_MASK_2);
+                               VRB1_PG_MASK_2);
                status = acc_reg_read(d, VRB1_PfHiSectionPowerGatingAck);
-               if (status != ACC200_PG_MASK_2) {
+               if (status != VRB1_PG_MASK_2) {
                        rte_bbdev_log(ERR, "Unexpected status %x %x",
-                                       status, ACC200_PG_MASK_2);
+                                       status, VRB1_PG_MASK_2);
                        return -ENODEV;
                }
                acc_reg_write(d, VRB1_PfHiSectionPowerGatingReq,
-                               ACC200_PG_MASK_3);
+                               VRB1_PG_MASK_3);
                status = acc_reg_read(d, VRB1_PfHiSectionPowerGatingAck);
-               if (status != ACC200_PG_MASK_3) {
+               if (status != VRB1_PG_MASK_3) {
                        rte_bbdev_log(ERR, "Unexpected status %x %x",
-                                       status, ACC200_PG_MASK_3);
+                                       status, VRB1_PG_MASK_3);
                        return -ENODEV;
                }
                /* Enable clocks for all sections. */
-               acc_reg_write(d, VRB1_PfHiClkGateHystReg, ACC200_CLK_EN);
+               acc_reg_write(d, VRB1_PfHiClkGateHystReg, VRB1_CLK_EN);
        }
 
        /* Explicitly releasing AXI as this may be stopped after PF FLR/BME. */
@@ -3466,7 +3462,7 @@ acc200_configure(const char *dev_name, struct 
rte_acc_conf *conf)
 
        /* Set the fabric mode. */
        address = VRB1_PfFabricM2iBufferReg;
-       value = ACC200_FABRIC_MODE;
+       value = VRB1_FABRIC_MODE;
        acc_reg_write(d, address, value);
 
        /* Set default descriptor signature. */
@@ -3475,12 +3471,12 @@ acc200_configure(const char *dev_name, struct 
rte_acc_conf *conf)
        acc_reg_write(d, address, value);
 
        /* Enable the Error Detection in DMA. */
-       value = ACC200_CFG_DMA_ERROR;
+       value = VRB1_CFG_DMA_ERROR;
        address = VRB1_PfDmaErrorDetectionEn;
        acc_reg_write(d, address, value);
 
        /* AXI Cache configuration. */
-       value = ACC200_CFG_AXI_CACHE;
+       value = VRB1_CFG_AXI_CACHE;
        address = VRB1_PfDmaAxcacheReg;
        acc_reg_write(d, address, value);
 
@@ -3505,7 +3501,7 @@ acc200_configure(const char *dev_name, struct 
rte_acc_conf *conf)
 
        /* Default FFT configuration. */
        address = VRB1_PfFftConfig0;
-       value = ACC200_FFT_CFG_0;
+       value = VRB1_FFT_CFG_0;
        acc_reg_write(d, address, value);
 
        /* Configure DMA Qmanager addresses. */
@@ -3520,7 +3516,7 @@ acc200_configure(const char *dev_name, struct 
rte_acc_conf *conf)
                        conf->q_dl_4g.num_qgroups +
                        conf->q_dl_5g.num_qgroups +
                        conf->q_fft.num_qgroups;
-       for (qg_idx = 0; qg_idx < ACC200_NUM_QGRPS; qg_idx++) {
+       for (qg_idx = 0; qg_idx < VRB1_NUM_QGRPS; qg_idx++) {
                address = VRB1_PfQmgrDepthLog2Grp + ACC_BYTES_IN_WORD * qg_idx;
                value = aqDepth(qg_idx, conf);
                acc_reg_write(d, address, value);
@@ -3547,7 +3543,7 @@ acc200_configure(const char *dev_name, struct 
rte_acc_conf *conf)
        }
 
        address = VRB1_PfQmgrGrpPriority;
-       value = ACC200_CFG_QMGR_HI_P;
+       value = VRB1_CFG_QMGR_HI_P;
        acc_reg_write(d, address, value);
 
        /* Template Configuration. */
@@ -3564,8 +3560,8 @@ acc200_configure(const char *dev_name, struct 
rte_acc_conf *conf)
        value = 0;
        for (qg_idx = numQqsAcc; qg_idx < (numQgs + numQqsAcc); qg_idx++)
                value |= (1 << qg_idx);
-       for (template_idx = ACC200_SIG_UL_4G;
-                       template_idx <= ACC200_SIG_UL_4G_LAST;
+       for (template_idx = VRB1_SIG_UL_4G;
+                       template_idx <= VRB1_SIG_UL_4G_LAST;
                        template_idx++) {
                address = VRB1_PfQmgrGrpTmplateReg4Indx
                                + ACC_BYTES_IN_WORD * template_idx;
@@ -3573,13 +3569,13 @@ acc200_configure(const char *dev_name, struct 
rte_acc_conf *conf)
        }
        /* 5GUL */
        numQqsAcc += numQgs;
-       numQgs  = conf->q_ul_5g.num_qgroups;
+       numQgs = conf->q_ul_5g.num_qgroups;
        value = 0;
        numEngines = 0;
        for (qg_idx = numQqsAcc; qg_idx < (numQgs + numQqsAcc); qg_idx++)
                value |= (1 << qg_idx);
-       for (template_idx = ACC200_SIG_UL_5G;
-                       template_idx <= ACC200_SIG_UL_5G_LAST;
+       for (template_idx = VRB1_SIG_UL_5G;
+                       template_idx <= VRB1_SIG_UL_5G_LAST;
                        template_idx++) {
                /* Check engine power-on status */
                address = VRB1_PfFecUl5gIbDebugReg + ACC_ENGINE_OFFSET * 
template_idx;
@@ -3599,8 +3595,8 @@ acc200_configure(const char *dev_name, struct 
rte_acc_conf *conf)
        value = 0;
        for (qg_idx = numQqsAcc; qg_idx < (numQgs + numQqsAcc); qg_idx++)
                value |= (1 << qg_idx);
-       for (template_idx = ACC200_SIG_DL_4G;
-                       template_idx <= ACC200_SIG_DL_4G_LAST;
+       for (template_idx = VRB1_SIG_DL_4G;
+                       template_idx <= VRB1_SIG_DL_4G_LAST;
                        template_idx++) {
                address = VRB1_PfQmgrGrpTmplateReg4Indx
                                + ACC_BYTES_IN_WORD * template_idx;
@@ -3612,8 +3608,8 @@ acc200_configure(const char *dev_name, struct 
rte_acc_conf *conf)
        value = 0;
        for (qg_idx = numQqsAcc; qg_idx < (numQgs + numQqsAcc); qg_idx++)
                value |= (1 << qg_idx);
-       for (template_idx = ACC200_SIG_DL_5G;
-                       template_idx <= ACC200_SIG_DL_5G_LAST;
+       for (template_idx = VRB1_SIG_DL_5G;
+                       template_idx <= VRB1_SIG_DL_5G_LAST;
                        template_idx++) {
                address = VRB1_PfQmgrGrpTmplateReg4Indx
                                + ACC_BYTES_IN_WORD * template_idx;
@@ -3625,8 +3621,8 @@ acc200_configure(const char *dev_name, struct 
rte_acc_conf *conf)
        value = 0;
        for (qg_idx = numQqsAcc; qg_idx < (numQgs + numQqsAcc); qg_idx++)
                value |= (1 << qg_idx);
-       for (template_idx = ACC200_SIG_FFT;
-                       template_idx <= ACC200_SIG_FFT_LAST;
+       for (template_idx = VRB1_SIG_FFT;
+                       template_idx <= VRB1_SIG_FFT_LAST;
                        template_idx++) {
                address = VRB1_PfQmgrGrpTmplateReg4Indx
                                + ACC_BYTES_IN_WORD * template_idx;
@@ -3649,7 +3645,7 @@ acc200_configure(const char *dev_name, struct 
rte_acc_conf *conf)
        acc_reg_write(d, VRB1_PfQmgrGrpFunction1, value);
 
        /* Configuration of the Arbitration QGroup depth to 1. */
-       for (qg_idx = 0; qg_idx < ACC200_NUM_QGRPS; qg_idx++) {
+       for (qg_idx = 0; qg_idx < VRB1_NUM_QGRPS; qg_idx++) {
                address = VRB1_PfQmgrArbQDepthGrp +
                                ACC_BYTES_IN_WORD * qg_idx;
                value = 0;
@@ -3671,9 +3667,9 @@ acc200_configure(const char *dev_name, struct 
rte_acc_conf *conf)
                }
        }
 
-       if (aram_address > ACC200_WORDS_IN_ARAM_SIZE) {
+       if (aram_address > VRB1_WORDS_IN_ARAM_SIZE) {
                rte_bbdev_log(ERR, "ARAM Configuration not fitting %d %d\n",
-                               aram_address, ACC200_WORDS_IN_ARAM_SIZE);
+                               aram_address, VRB1_WORDS_IN_ARAM_SIZE);
                return -EINVAL;
        }
 
@@ -3711,7 +3707,7 @@ acc200_configure(const char *dev_name, struct 
rte_acc_conf *conf)
        acc_reg_write(d, address, value);
 
        /* Configure the FFT RAM LUT. */
-       uint32_t fft_lut[ACC200_FFT_RAM_SIZE] = {
+       uint32_t fft_lut[VRB1_FFT_RAM_SIZE] = {
        0x1FFFF, 0x1FFFF, 0x1FFFE, 0x1FFFA, 0x1FFF6, 0x1FFF1, 0x1FFEA, 0x1FFE2,
        0x1FFD9, 0x1FFCE, 0x1FFC2, 0x1FFB5, 0x1FFA7, 0x1FF98, 0x1FF87, 0x1FF75,
        0x1FF62, 0x1FF4E, 0x1FF38, 0x1FF21, 0x1FF09, 0x1FEF0, 0x1FED6, 0x1FEBA,
@@ -3777,14 +3773,14 @@ acc200_configure(const char *dev_name, struct 
rte_acc_conf *conf)
        0x0191F, 0x0178E, 0x015FC, 0x0146A, 0x012D8, 0x01147, 0x00FB5, 0x00E23,
        0x00C91, 0x00AFF, 0x0096D, 0x007DB, 0x00648, 0x004B6, 0x00324, 0x00192};
 
-       acc_reg_write(d, VRB1_PfFftRamPageAccess, ACC200_FFT_RAM_EN + 64);
-       for (i = 0; i < ACC200_FFT_RAM_SIZE; i++)
+       acc_reg_write(d, VRB1_PfFftRamPageAccess, VRB1_FFT_RAM_EN + 64);
+       for (i = 0; i < VRB1_FFT_RAM_SIZE; i++)
                acc_reg_write(d, VRB1_PfFftRamOff + i * 4, fft_lut[i]);
-       acc_reg_write(d, VRB1_PfFftRamPageAccess, ACC200_FFT_RAM_DIS);
+       acc_reg_write(d, VRB1_PfFftRamPageAccess, VRB1_FFT_RAM_DIS);
 
        /* Enabling AQueues through the Queue hierarchy. */
-       for (vf_idx = 0; vf_idx < ACC200_NUM_VFS; vf_idx++) {
-               for (qg_idx = 0; qg_idx < ACC200_NUM_QGRPS; qg_idx++) {
+       for (vf_idx = 0; vf_idx < VRB1_NUM_VFS; vf_idx++) {
+               for (qg_idx = 0; qg_idx < VRB1_NUM_QGRPS; qg_idx++) {
                        value = 0;
                        if (vf_idx < conf->num_vf_bundles && qg_idx < totalQgs)
                                value = (1 << aqNum(qg_idx, conf)) - 1;
diff --git a/drivers/baseband/acc/acc200_pf_enum.h 
b/drivers/baseband/acc/vrb1_pf_enum.h
similarity index 97%
rename from drivers/baseband/acc/acc200_pf_enum.h
rename to drivers/baseband/acc/vrb1_pf_enum.h
index fc38465705..82a36685e9 100644
--- a/drivers/baseband/acc/acc200_pf_enum.h
+++ b/drivers/baseband/acc/vrb1_pf_enum.h
@@ -2,11 +2,11 @@
  * Copyright(c) 2021 Intel Corporation
  */
 
-#ifndef ACC200_PF_ENUM_H
-#define ACC200_PF_ENUM_H
+#ifndef VRB1_PF_ENUM_H
+#define VRB1_PF_ENUM_H
 
 /*
- * ACC200 Register mapping on PF BAR0
+ * VRB1 Register mapping on PF BAR0
  * This is automatically generated from RDL, format may change with new RDL
  * Release.
  * Variable names are as is
@@ -105,4 +105,4 @@ enum {
        ACC_PF_INT_APB_TIMEOUT = 15,
 };
 
-#endif /* ACC200_PF_ENUM_H */
+#endif /* VRB1_PF_ENUM_H */
diff --git a/drivers/baseband/acc/acc200_vf_enum.h 
b/drivers/baseband/acc/vrb1_vf_enum.h
similarity index 96%
rename from drivers/baseband/acc/acc200_vf_enum.h
rename to drivers/baseband/acc/vrb1_vf_enum.h
index 62a4f369bc..b17b2e34dd 100644
--- a/drivers/baseband/acc/acc200_vf_enum.h
+++ b/drivers/baseband/acc/vrb1_vf_enum.h
@@ -2,11 +2,11 @@
  * Copyright(c) 2021 Intel Corporation
  */
 
-#ifndef ACC200_VF_ENUM_H
-#define ACC200_VF_ENUM_H
+#ifndef VRB1_VF_ENUM_H
+#define VRB1_VF_ENUM_H
 
 /*
- * ACC200 Register mapping on VF BAR0
+ * VRB1 Register mapping on VF BAR0
  * This is automatically generated from RDL, format may change with new RDL
  */
 enum {
@@ -80,4 +80,4 @@ enum {
        ACC_VF_INT_DMA_MLD_DESC_IRQ = 10,
 };
 
-#endif /* ACC200_VF_ENUM_H */
+#endif /* VRB1_VF_ENUM_H */
diff --git a/drivers/baseband/acc/vrb_cfg.h b/drivers/baseband/acc/vrb_cfg.h
index 2b31244818..e3c8902b46 100644
--- a/drivers/baseband/acc/vrb_cfg.h
+++ b/drivers/baseband/acc/vrb_cfg.h
@@ -6,27 +6,27 @@
 #define _VRB_CFG_H_
 
 /**
- * @file acc200_cfg.h
+ * @file vrb_cfg.h
  *
- * Functions for configuring ACC200 HW.
+ * Functions for configuring VRB1 HW.
  * Configuration related to encoding/decoding is done through the
  * librte_bbdev library.
  */
 
 /**
- * Configure a ACC200 device.
+ * Configure a VRB1 device.
  *
  * @param dev_name
  *   The name of the device. This is the short form of PCI BDF, e.g. 00:01.0.
  *   It can also be retrieved for a bbdev device from the dev_name field in the
  *   rte_bbdev_info structure returned by rte_bbdev_info_get().
  * @param conf
- *   Configuration to apply to ACC200 HW.
+ *   Configuration to apply to VRB1 HW.
  *
  * @return
  *   Zero on success, negative value on failure.
  */
 int
-acc200_configure(const char *dev_name, struct rte_acc_conf *conf);
+vrb1_configure(const char *dev_name, struct rte_acc_conf *conf);
 
 #endif /* _VRB_CFG_H_ */
diff --git a/drivers/baseband/acc/vrb_pmd.h b/drivers/baseband/acc/vrb_pmd.h
index b074c8d4f9..f3c9239881 100644
--- a/drivers/baseband/acc/vrb_pmd.h
+++ b/drivers/baseband/acc/vrb_pmd.h
@@ -6,8 +6,8 @@
 #define _VRB_PMD_H_
 
 #include "acc_common.h"
-#include "acc200_pf_enum.h"
-#include "acc200_vf_enum.h"
+#include "vrb1_pf_enum.h"
+#include "vrb1_vf_enum.h"
 #include "vrb_cfg.h"
 
 /* Helper macro for logging */
@@ -17,76 +17,77 @@
 
 #ifdef RTE_LIBRTE_BBDEV_DEBUG
 #define rte_bbdev_log_debug(fmt, ...) \
-               rte_bbdev_log(DEBUG, "acc200_pmd: " fmt, \
+               rte_bbdev_log(DEBUG, "vrb_pmd: " fmt, \
                ##__VA_ARGS__)
 #else
 #define rte_bbdev_log_debug(fmt, ...)
 #endif
 
-/* ACC200 PF and VF driver names */
-#define ACC200PF_DRIVER_NAME           intel_acc200_pf
-#define ACC200VF_DRIVER_NAME           intel_acc200_vf
-
-/* ACC200 PCI vendor & device IDs */
-#define RTE_ACC200_VENDOR_ID           (0x8086)
-#define RTE_ACC200_PF_DEVICE_ID        (0x57C0)
-#define RTE_ACC200_VF_DEVICE_ID        (0x57C1)
-
-#define ACC200_VARIANT               2
-
-#define ACC200_MAX_PF_MSIX            (256+32)
-#define ACC200_MAX_VF_MSIX            (256+7)
-
-/* Values used in writing to the registers */
-#define ACC200_REG_IRQ_EN_ALL          0x1FF83FF  /* Enable all interrupts */
-
-/* Number of Virtual Functions ACC200 supports */
-#define ACC200_NUM_VFS                  16
-#define ACC200_NUM_QGRPS                16
-#define ACC200_NUM_AQS                  16
-
-#define ACC200_GRP_ID_SHIFT    10 /* Queue Index Hierarchy */
-#define ACC200_VF_ID_SHIFT     4  /* Queue Index Hierarchy */
-#define ACC200_WORDS_IN_ARAM_SIZE (256 * 1024 / 4)
-
-/* Mapping of signals for the available engines */
-#define ACC200_SIG_UL_5G       0
-#define ACC200_SIG_UL_5G_LAST  4
-#define ACC200_SIG_DL_5G      10
-#define ACC200_SIG_DL_5G_LAST 11
-#define ACC200_SIG_UL_4G      12
-#define ACC200_SIG_UL_4G_LAST 16
-#define ACC200_SIG_DL_4G      21
-#define ACC200_SIG_DL_4G_LAST 23
-#define ACC200_SIG_FFT        24
-#define ACC200_SIG_FFT_LAST   24
-
-#define ACC200_NUM_ACCS       5
-
-/* ACC200 Configuration */
-#define ACC200_FABRIC_MODE      0x8000103
-#define ACC200_CFG_DMA_ERROR    0x3DF
-#define ACC200_CFG_AXI_CACHE    0x11
-#define ACC200_CFG_QMGR_HI_P    0x0F0F
-#define ACC200_RESET_HARD       0x1FF
-#define ACC200_ENGINES_MAX      9
-#define ACC200_GPEX_AXIMAP_NUM  17
-#define ACC200_CLOCK_GATING_EN  0x30000
-#define ACC200_FFT_CFG_0        0x2001
-#define ACC200_FFT_RAM_EN       0x80008000
-#define ACC200_FFT_RAM_DIS      0x0
-#define ACC200_FFT_RAM_SIZE     512
-#define ACC200_CLK_EN           0x00010A01
-#define ACC200_CLK_DIS          0x01F10A01
-#define ACC200_PG_MASK_0        0x1F
-#define ACC200_PG_MASK_1        0xF
-#define ACC200_PG_MASK_2        0x1
-#define ACC200_PG_MASK_3        0x0
-#define ACC200_PG_MASK_FFT      1
-#define ACC200_PG_MASK_4GUL     4
-#define ACC200_PG_MASK_5GUL     8
-#define ACC200_STATUS_WAIT      10
-#define ACC200_STATUS_TO        100
+/* VRB1 PF and VF driver names */
+#define VRB_PF_DRIVER_NAME           intel_vran_boost_pf
+#define VRB_VF_DRIVER_NAME           intel_vran_boost_vf
+
+/* VRB1 PCI vendor & device IDs */
+#define RTE_VRB1_VENDOR_ID           (0x8086)
+#define RTE_VRB1_PF_DEVICE_ID        (0x57C0)
+#define RTE_VRB1_VF_DEVICE_ID        (0x57C1)
+
+#define VRB1_VARIANT               2
+
+#define VRB_NUM_ACCS                 6
+#define VRB_MAX_QGRPS                32
+
+#define ACC_STATUS_WAIT      10
+#define ACC_STATUS_TO        100
+
+/* VRB1 specific flags */
+
+#define VRB1_NUM_VFS                  16
+#define VRB1_NUM_QGRPS                16
+#define VRB1_NUM_AQS                  16
+#define VRB1_GRP_ID_SHIFT    10 /* Queue Index Hierarchy */
+#define VRB1_VF_ID_SHIFT     4  /* Queue Index Hierarchy */
+#define VRB1_WORDS_IN_ARAM_SIZE (256 * 1024 / 4)
+
+/* VRB1 Mapping of signals for the available engines */
+#define VRB1_SIG_UL_5G       0
+#define VRB1_SIG_UL_5G_LAST  4
+#define VRB1_SIG_DL_5G      10
+#define VRB1_SIG_DL_5G_LAST 11
+#define VRB1_SIG_UL_4G      12
+#define VRB1_SIG_UL_4G_LAST 16
+#define VRB1_SIG_DL_4G      21
+#define VRB1_SIG_DL_4G_LAST 23
+#define VRB1_SIG_FFT        24
+#define VRB1_SIG_FFT_LAST   24
+
+#define VRB1_NUM_ACCS       5
+
+/* VRB1 Configuration */
+#define VRB1_FABRIC_MODE      0x8000103
+#define VRB1_CFG_DMA_ERROR    0x3DF
+#define VRB1_CFG_AXI_CACHE    0x11
+#define VRB1_CFG_QMGR_HI_P    0x0F0F
+#define VRB1_RESET_HARD       0x1FF
+#define VRB1_ENGINES_MAX      9
+#define VRB1_GPEX_AXIMAP_NUM  17
+#define VRB1_CLOCK_GATING_EN  0x30000
+#define VRB1_FFT_CFG_0        0x2001
+#define VRB1_FFT_RAM_EN       0x80008000
+#define VRB1_FFT_RAM_DIS      0x0
+#define VRB1_FFT_RAM_SIZE     512
+#define VRB1_CLK_EN           0x00010A01
+#define VRB1_CLK_DIS          0x01F10A01
+#define VRB1_PG_MASK_0        0x1F
+#define VRB1_PG_MASK_1        0xF
+#define VRB1_PG_MASK_2        0x1
+#define VRB1_PG_MASK_3        0x0
+#define VRB1_PG_MASK_FFT      1
+#define VRB1_PG_MASK_4GUL     4
+#define VRB1_PG_MASK_5GUL     8
+#define VRB1_REG_IRQ_EN_ALL          0x1FF83FF  /* Enable all interrupts */
+#define VRB1_MAX_PF_MSIX            (256+32)
+#define VRB1_MAX_VF_MSIX            (256+7)
 
 struct acc_registry_addr {
        unsigned int dma_ring_dl5g_hi;
@@ -127,7 +128,7 @@ struct acc_registry_addr {
 };
 
 /* Structure holding registry addresses for PF */
-static const struct acc_registry_addr acc200_pf_reg_addr = {
+static const struct acc_registry_addr vrb1_pf_reg_addr = {
        .dma_ring_dl5g_hi = VRB1_PfDmaFec5GdlDescBaseHiRegVf,
        .dma_ring_dl5g_lo = VRB1_PfDmaFec5GdlDescBaseLoRegVf,
        .dma_ring_ul5g_hi = VRB1_PfDmaFec5GulDescBaseHiRegVf,
@@ -166,7 +167,7 @@ static const struct acc_registry_addr acc200_pf_reg_addr = {
 };
 
 /* Structure holding registry addresses for VF */
-static const struct acc_registry_addr acc200_vf_reg_addr = {
+static const struct acc_registry_addr vrb1_vf_reg_addr = {
        .dma_ring_dl5g_hi = VRB1_VfDmaFec5GdlDescBaseHiRegVf,
        .dma_ring_dl5g_lo = VRB1_VfDmaFec5GdlDescBaseLoRegVf,
        .dma_ring_ul5g_hi = VRB1_VfDmaFec5GulDescBaseHiRegVf,
-- 
2.34.1

Reply via email to