Hello, can you please specify the OFED and FW version you use? Regards, Asaf Penso
>-----Original Message----- >From: bugzi...@dpdk.org <bugzi...@dpdk.org> >Sent: Friday, August 19, 2022 10:50 AM >To: dev@dpdk.org >Subject: [Bug 1069] Testpmd parameter --enable-lro fails on Mellanox >ConnectX-5 > >https://bugs.dpdk.org/show_bug.cgi?id=1069 > > Bug ID: 1069 > Summary: Testpmd parameter --enable-lro fails on Mellanox > ConnectX-5 > Product: DPDK > Version: 22.03 > Hardware: All > OS: Linux > Status: UNCONFIRMED > Severity: normal > Priority: Normal > Component: ethdev > Assignee: dev@dpdk.org > Reporter: liangxing.w...@arm.com > Target Milestone: --- > >User tried to enable lro for Mellanox ConnectX5 (MT27800) card through >below dpdk testpmd cmd: > >################# > sudo ./dpdk-testpmd -l 15-16 -a 0000:01:00.0,dv_flow_en=1 -v -- --txq=1 >--rxq=1 --enable-lro -i > >but always encountered below error: > >##################### >EAL: Detected CPU lcores: 80 >EAL: Detected NUMA nodes: 1 >EAL: RTE Version: 'DPDK 22.03.0' >EAL: Detected static linkage of DPDK >EAL: Multi-process socket /var/run/dpdk/rte/mp_socket >EAL: Selected IOVA mode 'VA' >EAL: 32 hugepages of size 1073741824 reserved, but no mount > ed hugetlbfs found for that size >EAL: VFIO support initialized >EAL: Probe PCI driver: mlx5_pci (15b3:1019) device: 0000:01 > :00.0 (socket 0) >testpmd: create a new mbuf pool <mb_pool_0>: n=155456, size > =2176, socket=0 >testpmd: preferred mempool ops selected: ring_mp_mc > >Warning! port-topology=paired and odd forward ports number, > the last port will pair with itself. > >Configuring Port 0 (socket 0) >Ethdev port_id=0 requested Rx offloads 0x10 doesn't match R > x offloads capabilities 0x19620f in rte_eth_dev_configure() Fail to >configure port 0 >EAL: Error - exiting with code: 1 > Cause: Start ports failed > >-- >You are receiving this mail because: >You are the assignee for the bug.
