The ixgbe driver likes to be far to chatty in the system log
which is good for the original developer but not good for a production
product. All the normal messages should be changed from INFO to DEBUG.
Signed-off-by: Stephen Hemminger <stephen at networkplumber.org>
---
lib/librte_pmd_ixgbe/ixgbe_ethdev.c | 14 +++++++-------
lib/librte_pmd_ixgbe/ixgbe_rxtx.c | 20 ++++++++++----------
2 files changed, 17 insertions(+), 17 deletions(-)
diff --git a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
index 7e75382..bb24a17 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
@@ -568,7 +568,7 @@ ixgbe_dev_queue_stats_mapping_set(struct rte_eth_dev
*eth_dev,
(hw->mac.type != ixgbe_mac_X550EM_x))
return -ENOSYS;
- PMD_INIT_LOG(INFO, "Setting port %u, %s queue_id %d to stat index %d",
+ PMD_INIT_LOG(DEBUG, "Setting port %u, %s queue_id %d to stat index %d",
eth_dev->data->port_id, is_rx ? "RX" : "TX",
queue_id, stat_idx);
@@ -594,20 +594,20 @@ ixgbe_dev_queue_stats_mapping_set(struct rte_eth_dev
*eth_dev,
else
stat_mappings->rqsmr[n] |= qsmr_mask;
- PMD_INIT_LOG(INFO, "Set port %u, %s queue_id %d to stat index %d",
+ PMD_INIT_LOG(DEBUG, "Set port %u, %s queue_id %d to stat index %d",
eth_dev->data->port_id, is_rx ? "RX" : "TX",
queue_id, stat_idx);
- PMD_INIT_LOG(INFO, "%s[%d] = 0x%08x", is_rx ? "RQSMR" : "TQSM", n,
+ PMD_INIT_LOG(DEBUG, "%s[%d] = 0x%08x", is_rx ? "RQSMR" : "TQSM", n,
is_rx ? stat_mappings->rqsmr[n] : stat_mappings->tqsm[n]);
/* Now write the mapping in the appropriate register */
if (is_rx) {
- PMD_INIT_LOG(INFO, "Write 0x%x to RX IXGBE stat mapping reg:%d",
+ PMD_INIT_LOG(DEBUG, "Write 0x%x to RX IXGBE stat mapping
reg:%d",
stat_mappings->rqsmr[n], n);
IXGBE_WRITE_REG(hw, IXGBE_RQSMR(n), stat_mappings->rqsmr[n]);
}
else {
- PMD_INIT_LOG(INFO, "Write 0x%x to TX IXGBE stat mapping reg:%d",
+ PMD_INIT_LOG(DEBUG, "Write 0x%x to TX IXGBE stat mapping
reg:%d",
stat_mappings->tqsm[n], n);
IXGBE_WRITE_REG(hw, IXGBE_TQSM(n), stat_mappings->tqsm[n]);
}
@@ -751,7 +751,7 @@ eth_ixgbe_dev_init(struct rte_eth_dev *eth_dev)
ixgbe_set_tx_function(eth_dev, txq);
} else {
/* Use default TX function if we get here */
- PMD_INIT_LOG(INFO, "No TX queues configured yet. "
+ PMD_INIT_LOG(DEBUG, "No TX queues configured yet. "
"Using default TX function.");
}
@@ -2275,7 +2275,7 @@ ixgbe_dev_interrupt_get_status(struct rte_eth_dev *dev)
/* read-on-clear nic registers here */
eicr = IXGBE_READ_REG(hw, IXGBE_EICR);
- PMD_DRV_LOG(INFO, "eicr %x", eicr);
+ PMD_DRV_LOG(DEBUG, "eicr %x", eicr);
intr->flags = 0;
if (eicr & IXGBE_EICR_LSC) {
diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
index 57c9430..08830bf 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
@@ -1871,23 +1871,23 @@ ixgbe_set_tx_function(struct rte_eth_dev *dev, struct
ixgbe_tx_queue *txq)
/* Use a simple Tx queue (no offloads, no multi segs) if possible */
if (((txq->txq_flags & IXGBE_SIMPLE_FLAGS) == IXGBE_SIMPLE_FLAGS)
&& (txq->tx_rs_thresh >= RTE_PMD_IXGBE_TX_MAX_BURST)) {
- PMD_INIT_LOG(INFO, "Using simple tx code path");
+ PMD_INIT_LOG(DEBUG, "Using simple tx code path");
#ifdef RTE_IXGBE_INC_VECTOR
if (txq->tx_rs_thresh <= RTE_IXGBE_TX_MAX_FREE_BUF_SZ &&
(rte_eal_process_type() != RTE_PROC_PRIMARY ||
ixgbe_txq_vec_setup(txq) == 0)) {
- PMD_INIT_LOG(INFO, "Vector tx enabled.");
+ PMD_INIT_LOG(DEBUG, "Vector tx enabled.");
dev->tx_pkt_burst = ixgbe_xmit_pkts_vec;
} else
#endif
dev->tx_pkt_burst = ixgbe_xmit_pkts_simple;
} else {
- PMD_INIT_LOG(INFO, "Using full-featured tx code path");
- PMD_INIT_LOG(INFO,
+ PMD_INIT_LOG(DEBUG, "Using full-featured tx code path");
+ PMD_INIT_LOG(DEBUG,
" - txq_flags = %lx "
"[IXGBE_SIMPLE_FLAGS=%lx]",
(unsigned long)txq->txq_flags,
(unsigned long)IXGBE_SIMPLE_FLAGS);
- PMD_INIT_LOG(INFO,
+ PMD_INIT_LOG(DEBUG,
" - tx_rs_thresh = %lu "
"[RTE_PMD_IXGBE_TX_MAX_BURST=%lu]",
(unsigned long)txq->tx_rs_thresh,
(unsigned long)RTE_PMD_IXGBE_TX_MAX_BURST);
@@ -3761,11 +3761,11 @@ void ixgbe_set_rx_function(struct rte_eth_dev *dev)
*/
if (dev->data->lro) {
if (adapter->rx_bulk_alloc_allowed) {
- PMD_INIT_LOG(INFO, "LRO is requested. Using a bulk "
+ PMD_INIT_LOG(DEBUG, "LRO is requested. Using a bulk "
"allocation version");
dev->rx_pkt_burst = ixgbe_recv_pkts_lro_bulk_alloc;
} else {
- PMD_INIT_LOG(INFO, "LRO is requested. Using a single "
+ PMD_INIT_LOG(DEBUG, "LRO is requested. Using a single "
"allocation version");
dev->rx_pkt_burst = ixgbe_recv_pkts_lro_single_alloc;
}
@@ -3781,7 +3781,7 @@ void ixgbe_set_rx_function(struct rte_eth_dev *dev)
dev->rx_pkt_burst = ixgbe_recv_scattered_pkts_vec;
} else if (adapter->rx_bulk_alloc_allowed) {
- PMD_INIT_LOG(INFO, "Using a Scattered with bulk "
+ PMD_INIT_LOG(DEBUG, "Using a Scattered with bulk "
"allocation callback (port=%d).",
dev->data->port_id);
dev->rx_pkt_burst = ixgbe_recv_pkts_lro_bulk_alloc;
@@ -3803,7 +3803,7 @@ void ixgbe_set_rx_function(struct rte_eth_dev *dev)
* - Single buffer allocation (the simplest one)
*/
} else if (adapter->rx_vec_allowed) {
- PMD_INIT_LOG(INFO, "Vector rx enabled, please make sure RX "
+ PMD_INIT_LOG(DEBUG, "Vector rx enabled, please make sure RX "
"burst size no less than 32.");
dev->rx_pkt_burst = ixgbe_recv_pkts_vec;
@@ -3961,7 +3961,7 @@ ixgbe_set_rsc(struct rte_eth_dev *dev)
dev->data->lro = 1;
- PMD_INIT_LOG(INFO, "enabling LRO mode");
+ PMD_INIT_LOG(DEBUG, "enabling LRO mode");
return 0;
}
--
2.1.4
