[PATCH 01/10] common/cnxk: update register access for CNF10xxN

[Tomasz Duszynski]

Due to HW changes some fields which were used to enable
xmit were moved elsewhere. This patch takes care of this.

Signed-off-by: Tomasz Duszynski <tduszyn...@marvell.com>
Reviewed-by: Jakub Palider <jpali...@marvell.com>
Reviewed-by: Jerin Jacob Kollanukkaran <jer...@marvell.com>
Tested-by: Jerin Jacob Kollanukkaran <jer...@marvell.com>
---
 drivers/common/cnxk/roc_bphy_cgx.c | 33 ++++++++++++++++++++----------
 1 file changed, 22 insertions(+), 11 deletions(-)

diff --git a/drivers/common/cnxk/roc_bphy_cgx.c 
b/drivers/common/cnxk/roc_bphy_cgx.c
index c3be3c9041..19baaa6757 100644
--- a/drivers/common/cnxk/roc_bphy_cgx.c
+++ b/drivers/common/cnxk/roc_bphy_cgx.c
@@ -21,10 +21,13 @@
  *
  * Hence common longer mask may be used.
  */
-#define CGX_CMRX_RX_LMACS      0x128
-#define CGX_CMRX_RX_LMACS_LMACS GENMASK_ULL(3, 0)
-#define CGX_CMRX_SCRATCH0      0x1050
-#define CGX_CMRX_SCRATCH1      0x1058
+#define CGX_CMRX_RX_LMACS                     0x128
+#define CGX_CMRX_RX_LMACS_LMACS               GENMASK_ULL(3, 0)
+#define CGX_CMRX_SCRATCH0                     0x1050
+#define CGX_CMRX_SCRATCH1                     0x1058
+#define CGX_MTI_MAC100X_COMMAND_CONFIG        0x8010
+#define CGX_MTI_MAC100X_COMMAND_CONFIG_RX_ENA BIT_ULL(1)
+#define CGX_MTI_MAC100X_COMMAND_CONFIG_TX_ENA BIT_ULL(0)
 
 static uint64_t
 roc_bphy_cgx_read(struct roc_bphy_cgx *roc_cgx, uint64_t lmac, uint64_t offset)
@@ -221,7 +224,7 @@ static int
 roc_bphy_cgx_start_stop_rxtx(struct roc_bphy_cgx *roc_cgx, unsigned int lmac,
                             bool start)
 {
-       uint64_t val;
+       uint64_t val, reg, rx_field, tx_field;
 
        if (!roc_cgx)
                return -EINVAL;
@@ -229,16 +232,24 @@ roc_bphy_cgx_start_stop_rxtx(struct roc_bphy_cgx 
*roc_cgx, unsigned int lmac,
        if (!roc_bphy_cgx_lmac_exists(roc_cgx, lmac))
                return -ENODEV;
 
+       if (roc_model_is_cnf10kb()) {
+               reg = CGX_MTI_MAC100X_COMMAND_CONFIG;
+               rx_field = CGX_MTI_MAC100X_COMMAND_CONFIG_RX_ENA;
+               tx_field = CGX_MTI_MAC100X_COMMAND_CONFIG_TX_ENA;
+       } else {
+               reg = CGX_CMRX_CONFIG;
+               rx_field = CGX_CMRX_CONFIG_DATA_PKT_RX_EN;
+               tx_field = CGX_CMRX_CONFIG_DATA_PKT_TX_EN;
+       }
+
        pthread_mutex_lock(&roc_cgx->lock);
-       val = roc_bphy_cgx_read(roc_cgx, lmac, CGX_CMRX_CONFIG);
-       val &= ~(CGX_CMRX_CONFIG_DATA_PKT_RX_EN |
-                CGX_CMRX_CONFIG_DATA_PKT_TX_EN);
+       val = roc_bphy_cgx_read(roc_cgx, lmac, reg);
+       val &= ~(rx_field | tx_field);
 
        if (start)
-               val |= FIELD_PREP(CGX_CMRX_CONFIG_DATA_PKT_RX_EN, 1) |
-                      FIELD_PREP(CGX_CMRX_CONFIG_DATA_PKT_TX_EN, 1);
+               val |= FIELD_PREP(rx_field, 1) | FIELD_PREP(tx_field, 1);
 
-       roc_bphy_cgx_write(roc_cgx, lmac, CGX_CMRX_CONFIG, val);
+       roc_bphy_cgx_write(roc_cgx, lmac, reg, val);
        pthread_mutex_unlock(&roc_cgx->lock);
 
        return 0;
-- 
2.25.1