I agree with you.
Will submit a new revision.
Thanks
On Thu, Feb 10, 2022 at 3:43 AM Xu, Ting <ting...@intel.com> wrote:
>
> > -----Original Message-----
> > From: Ghalem Boudour <ghalem.boud...@6wind.com>
> > Sent: Thursday, February 10, 2022 3:27 AM
> > To: Xu, Ting <ting...@intel.com>
> > Cc: Wu, Jingjing <jingjing...@intel.com>; Xing, Beilei
> > <beilei.x...@intel.com>;
> > dev@dpdk.org; Thibaut Collet <thibaut.col...@6wind.com>; Olivier Matz
> > <olivier.m...@6wind.com>
> > Subject: Re: [PATCH] net/iavf: initialize large VF setting at startup
> >
> > Hi Ting,
> >
> > The purpose of the correction is to ensure that the rss configuration is
> > aligned with the number of queues allocated on the current boot and not
> > impacted by a previous configuration done in a previous boot.
> > The rss configuration is only available if VIRTCHNL_VF_OFFLOAD_RSS_PF is
> > present and that is the reason that we have set the operation in part of
> > VIRTCHNL_VF_OFFLOAD_RSS_PF.
> >
> > Nevertheless this operation can be moved outside to be more generic and
> > also covers iavf_config_irq_map.
> >
> > On Wed, Feb 9, 2022 at 3:42 AM Xu, Ting <ting...@intel.com> wrote:
> > >
> > > > -----Original Message-----
> > > > From: Ghalem Boudour <ghalem.boud...@6wind.com>
> > > > Sent: Thursday, February 3, 2022 5:04 PM
> > > > To: Wu, Jingjing <jingjing...@intel.com>; Xing, Beilei
> > > > <beilei.x...@intel.com>
> > > > Cc: dev@dpdk.org; Ghalem Boudour <ghalem.boud...@6wind.com>;
> > Thibaut
> > > > Collet <thibaut.col...@6wind.com>; Olivier Matz
> > > > <olivier.m...@6wind.com>
> > > > Subject: [PATCH] net/iavf: initialize large VF setting at startup
> > > >
> > > > lv_enabled is used to remember if large VF setting is configured,
> > > > but its value is not initialized at startup. This can lead to a
> > > > different configuration regarding the initial configuration of the PF.
> > > > For example, a first start is done with 8 rx and 8 tx queues. Large
> > > > VF is not needed and reta size is 64.
> > > > A second start is done with 20 rx and tx queues. Large VF is
> > > > required and reta size is 256.
> > > > A third start is done with 2 rx and tx queues. Large VF is not
> > > > needed but reta size is 256 as the PF has been configured during the
> > second start.
> > > >
> > > > In order to have a consistent behavior regarding reta size whatever
> > > > the configuration of the PF (may be changed by a previous boot) the
> > > > lv_enabled must be set properly at the init phase.
> > > >
> > > > Signed-off-by: Ghalem Boudour <ghalem.boud...@6wind.com>
> > > > Signed-off-by: Thibaut Collet <thibaut.col...@6wind.com>
> > > > Reviewed-by: Olivier Matz <olivier.m...@6wind.com>
> > > > ---
> > > > drivers/net/iavf/iavf_ethdev.c | 2 ++
> > > > 1 file changed, 2 insertions(+)
> > > >
> > > > diff --git a/drivers/net/iavf/iavf_ethdev.c
> > > > b/drivers/net/iavf/iavf_ethdev.c index 79397f15e54f..09410be4b712
> > > > 100644
> > > > --- a/drivers/net/iavf/iavf_ethdev.c
> > > > +++ b/drivers/net/iavf/iavf_ethdev.c
> > > > @@ -2276,6 +2276,8 @@ iavf_init_vf(struct rte_eth_dev *dev)
> > > > PMD_INIT_LOG(ERR, "unable to allocate rss_lut
> > > > memory");
> > > > goto err_rss;
> > > > }
> > > > + if (vf->vsi_res->num_queue_pairs >
> > > > IAVF_MAX_NUM_QUEUES_DFLT)
> > > > + vf->lv_enabled = true;
> > >
> > > Why you put this operation in the part of "
> > VIRTCHNL_VF_OFFLOAD_RSS_PF"?
> > >
> > > > }
> > > >
> > > > if (vf->vf_res->vf_cap_flags &
> > > > VIRTCHNL_VF_OFFLOAD_RX_FLEX_DESC) {
> > > > --
> > > > 2.30.2
> > >
>
> I think it is OK to move outside to the generic vf initialization since it is
> not only bound with RSS, what's your opinion?
