The ixgbe driver likes to be far to chatty in the system log
which is good for the original developer but not good for a production
product.
Reduce the log spam by doing:
* All the normal messages should be changed from INFO to DEBUG.
* The log messages should be done with RTE_LOG so that they can be
compiled out if RTE_LOG_LEVEL is set.
* The link state print routine prints more than is necessary
PCI information is already known (earlier in log) and has
no purpose here.
Signed-off-by: Stephen Hemminger <stephen at networkplumber.org>
--- a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
@@ -2278,20 +2278,15 @@
memset(&link, 0, sizeof(link));
rte_ixgbe_dev_atomic_read_link_status(dev, &link);
if (link.link_status) {
- PMD_INIT_LOG(INFO, "Port %d: Link Up - speed %u Mbps - %s",
- (int)(dev->data->port_id),
+ PMD_INIT_LOG(DEBUG, "Port %u: Link Up - speed %u Mbps - %s",
+ dev->data->port_id,
(unsigned)link.link_speed,
link.link_duplex == ETH_LINK_FULL_DUPLEX ?
"full-duplex" : "half-duplex");
} else {
- PMD_INIT_LOG(INFO, " Port %d: Link Down",
- (int)(dev->data->port_id));
+ PMD_INIT_LOG(DEBUG, "Port %d: Link Down",
+ dev->data->port_id);
}
- PMD_INIT_LOG(INFO, "PCI Address: %04d:%02d:%02d:%d",
- dev->pci_dev->addr.domain,
- dev->pci_dev->addr.bus,
- dev->pci_dev->addr.devid,
- dev->pci_dev->addr.function);
}
/*
--- a/lib/librte_pmd_ixgbe/ixgbe_logs.h
+++ b/lib/librte_pmd_ixgbe/ixgbe_logs.h
@@ -35,8 +35,7 @@
#define _IXGBE_LOGS_H_
#define PMD_INIT_LOG(level, fmt, args...) \
- rte_log(RTE_LOG_ ## level, RTE_LOGTYPE_PMD, \
- "PMD: %s(): " fmt "\n", __func__, ##args)
+ RTE_LOG(level, PMD, "%s(): " fmt "\n", __func__, ##args)
#ifdef RTE_LIBRTE_IXGBE_DEBUG_INIT
#define PMD_INIT_FUNC_TRACE() PMD_INIT_LOG(DEBUG, " >>")
--- a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
@@ -1752,23 +1752,23 @@
/* Use a simple Tx queue (no offloads, no multi segs) if possible */
if (((txq->txq_flags & IXGBE_SIMPLE_FLAGS) == IXGBE_SIMPLE_FLAGS)
&& (txq->tx_rs_thresh >= RTE_PMD_IXGBE_TX_MAX_BURST)) {
- PMD_INIT_LOG(INFO, "Using simple tx code path");
+ PMD_INIT_LOG(DEBUG, "Using simple tx code path");
#ifdef RTE_IXGBE_INC_VECTOR
if (txq->tx_rs_thresh <= RTE_IXGBE_TX_MAX_FREE_BUF_SZ &&
(rte_eal_process_type() != RTE_PROC_PRIMARY ||
ixgbe_txq_vec_setup(txq) == 0)) {
- PMD_INIT_LOG(INFO, "Vector tx enabled.");
+ PMD_INIT_LOG(DEBUG, "Vector tx enabled.");
dev->tx_pkt_burst = ixgbe_xmit_pkts_vec;
} else
#endif
dev->tx_pkt_burst = ixgbe_xmit_pkts_simple;
} else {
- PMD_INIT_LOG(INFO, "Using full-featured tx code path");
- PMD_INIT_LOG(INFO,
+ PMD_INIT_LOG(DEBUG, "Using full-featured tx code path");
+ PMD_INIT_LOG(DEBUG,
" - txq_flags = %lx "
"[IXGBE_SIMPLE_FLAGS=%lx]",
(unsigned long)txq->txq_flags,
(unsigned long)IXGBE_SIMPLE_FLAGS);
- PMD_INIT_LOG(INFO,
+ PMD_INIT_LOG(DEBUG,
" - tx_rs_thresh = %lu "
"[RTE_PMD_IXGBE_TX_MAX_BURST=%lu]",
(unsigned long)txq->tx_rs_thresh,
(unsigned long)RTE_PMD_IXGBE_TX_MAX_BURST);
@@ -2245,7 +2245,7 @@
dev->rx_pkt_burst = ixgbe_recv_pkts_bulk_alloc;
#ifdef RTE_IXGBE_INC_VECTOR
if (!ixgbe_rx_vec_condition_check(dev)) {
- PMD_INIT_LOG(INFO, "Vector rx enabled, please make "
+ PMD_INIT_LOG(DEBUG, "Vector rx enabled, please make "
"sure RX burst size no less than 32.");
dev->rx_pkt_burst = ixgbe_recv_pkts_vec;
}
---
lib/librte_pmd_ixgbe/ixgbe_ethdev.c | 15 +++++----------
lib/librte_pmd_ixgbe/ixgbe_logs.h | 3 +--
lib/librte_pmd_ixgbe/ixgbe_rxtx.c | 12 ++++++------
3 files changed, 12 insertions(+), 18 deletions(-)
diff --git a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
index 9bdc046..171809f 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
@@ -2293,20 +2293,15 @@ ixgbe_dev_link_status_print(struct rte_eth_dev *dev)
memset(&link, 0, sizeof(link));
rte_ixgbe_dev_atomic_read_link_status(dev, &link);
if (link.link_status) {
- PMD_INIT_LOG(INFO, "Port %d: Link Up - speed %u Mbps - %s",
- (int)(dev->data->port_id),
+ PMD_INIT_LOG(DEBUG, "Port %u: Link Up - speed %u Mbps - %s",
+ dev->data->port_id,
(unsigned)link.link_speed,
link.link_duplex == ETH_LINK_FULL_DUPLEX ?
"full-duplex" : "half-duplex");
} else {
- PMD_INIT_LOG(INFO, " Port %d: Link Down",
- (int)(dev->data->port_id));
- }
- PMD_INIT_LOG(INFO, "PCI Address: %04d:%02d:%02d:%d",
- dev->pci_dev->addr.domain,
- dev->pci_dev->addr.bus,
- dev->pci_dev->addr.devid,
- dev->pci_dev->addr.function);
+ PMD_INIT_LOG(DEBUG, "Port %d: Link Down",
+ dev->data->port_id);
+ }
}
/*
diff --git a/lib/librte_pmd_ixgbe/ixgbe_logs.h
b/lib/librte_pmd_ixgbe/ixgbe_logs.h
index 572e030..53ba42d 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_logs.h
+++ b/lib/librte_pmd_ixgbe/ixgbe_logs.h
@@ -35,8 +35,7 @@
#define _IXGBE_LOGS_H_
#define PMD_INIT_LOG(level, fmt, args...) \
- rte_log(RTE_LOG_ ## level, RTE_LOGTYPE_PMD, \
- "PMD: %s(): " fmt "\n", __func__, ##args)
+ RTE_LOG(level, PMD, "%s(): " fmt "\n", __func__, ##args)
#ifdef RTE_LIBRTE_IXGBE_DEBUG_INIT
#define PMD_INIT_FUNC_TRACE() PMD_INIT_LOG(DEBUG, " >>")
diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
index 811493e..8881194 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
@@ -1770,23 +1770,23 @@ set_tx_function(struct rte_eth_dev *dev, struct
igb_tx_queue *txq)
/* Use a simple Tx queue (no offloads, no multi segs) if possible */
if (((txq->txq_flags & IXGBE_SIMPLE_FLAGS) == IXGBE_SIMPLE_FLAGS)
&& (txq->tx_rs_thresh >= RTE_PMD_IXGBE_TX_MAX_BURST)) {
- PMD_INIT_LOG(INFO, "Using simple tx code path");
+ PMD_INIT_LOG(DEBUG, "Using simple tx code path");
#ifdef RTE_IXGBE_INC_VECTOR
if (txq->tx_rs_thresh <= RTE_IXGBE_TX_MAX_FREE_BUF_SZ &&
(rte_eal_process_type() != RTE_PROC_PRIMARY ||
ixgbe_txq_vec_setup(txq) == 0)) {
- PMD_INIT_LOG(INFO, "Vector tx enabled.");
+ PMD_INIT_LOG(DEBUG, "Vector tx enabled.");
dev->tx_pkt_burst = ixgbe_xmit_pkts_vec;
} else
#endif
dev->tx_pkt_burst = ixgbe_xmit_pkts_simple;
} else {
- PMD_INIT_LOG(INFO, "Using full-featured tx code path");
- PMD_INIT_LOG(INFO,
+ PMD_INIT_LOG(DEBUG, "Using full-featured tx code path");
+ PMD_INIT_LOG(DEBUG,
" - txq_flags = %lx "
"[IXGBE_SIMPLE_FLAGS=%lx]",
(unsigned long)txq->txq_flags,
(unsigned long)IXGBE_SIMPLE_FLAGS);
- PMD_INIT_LOG(INFO,
+ PMD_INIT_LOG(DEBUG,
" - tx_rs_thresh = %lu "
"[RTE_PMD_IXGBE_TX_MAX_BURST=%lu]",
(unsigned long)txq->tx_rs_thresh,
(unsigned long)RTE_PMD_IXGBE_TX_MAX_BURST);
@@ -2263,7 +2263,7 @@ ixgbe_dev_rx_queue_setup(struct rte_eth_dev *dev,
#ifdef RTE_IXGBE_INC_VECTOR
if (!ixgbe_rx_vec_condition_check(dev) &&
(rte_is_power_of_2(nb_desc))) {
- PMD_INIT_LOG(INFO, "Vector rx enabled, please make "
+ PMD_INIT_LOG(DEBUG, "Vector rx enabled, please make "
"sure RX burst size no less than 32.");
dev->rx_pkt_burst = ixgbe_recv_pkts_vec;
}
--
2.1.4
