IB spec doesn't allow 255 ports on a single HCA, port number of 256 was
cast to u8 value 0 which invalid to ibv_query_port()
This patch invokes Netlink api to query port state when port number
greater than 255.
Signed-off-by: Xueming Li <xuemi...@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viachesl...@nvidia.com>
---
drivers/net/mlx5/linux/mlx5_os.c | 46 ++++++++++++++++++++++----------
1 file changed, 32 insertions(+), 14 deletions(-)
diff --git a/drivers/net/mlx5/linux/mlx5_os.c b/drivers/net/mlx5/linux/mlx5_os.c
index 3746057673d..f283a3779cc 100644
--- a/drivers/net/mlx5/linux/mlx5_os.c
+++ b/drivers/net/mlx5/linux/mlx5_os.c
@@ -956,7 +956,7 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
{
const struct mlx5_switch_info *switch_info = &spawn->info;
struct mlx5_dev_ctx_shared *sh = NULL;
- struct ibv_port_attr port_attr;
+ struct ibv_port_attr port_attr = { .state = IBV_PORT_NOP };
struct mlx5dv_context dv_attr = { .comp_mask = 0 };
struct rte_eth_dev *eth_dev = NULL;
struct mlx5_priv *priv = NULL;
@@ -976,6 +976,7 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
int own_domain_id = 0;
uint16_t port_id;
struct mlx5_port_info vport_info = { .query_flags = 0 };
+ int nl_rdma = -1;
int i;
/* Determine if this port representor is supposed to be spawned. */
@@ -1170,19 +1171,36 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
" old OFED/rdma-core version or firmware configuration");
#endif
config->mpls_en = mpls_en;
+ nl_rdma = mlx5_nl_init(NETLINK_RDMA);
/* Check port status. */
- err = mlx5_glue->query_port(sh->ctx, spawn->phys_port, &port_attr);
- if (err) {
- DRV_LOG(ERR, "port query failed: %s", strerror(err));
- goto error;
- }
- if (port_attr.link_layer != IBV_LINK_LAYER_ETHERNET) {
- DRV_LOG(ERR, "port is not configured in Ethernet mode");
- err = EINVAL;
- goto error;
+ if (spawn->phys_port <= UINT8_MAX) {
+ /* Legacy Verbs api only support u8 port number. */
+ err = mlx5_glue->query_port(sh->ctx, spawn->phys_port,
+ &port_attr);
+ if (err) {
+ DRV_LOG(ERR, "port query failed: %s", strerror(err));
+ goto error;
+ }
+ if (port_attr.link_layer != IBV_LINK_LAYER_ETHERNET) {
+ DRV_LOG(ERR, "port is not configured in Ethernet mode");
+ err = EINVAL;
+ goto error;
+ }
+ } else if (nl_rdma >= 0) {
+ /* IB doesn't allow more than 255 ports, must be Ethernet. */
+ err = mlx5_nl_port_state(nl_rdma,
+ ((struct ibv_device *)spawn->phys_dev)->name,
+ spawn->phys_port);
+ if (err < 0) {
+ DRV_LOG(INFO, "Failed to get netlink port state: %s",
+ strerror(rte_errno));
+ err = -rte_errno;
+ goto error;
+ }
+ port_attr.state = (enum ibv_port_state)err;
}
if (port_attr.state != IBV_PORT_ACTIVE)
- DRV_LOG(DEBUG, "port is not active: \"%s\" (%d)",
+ DRV_LOG(INFO, "port is not active: \"%s\" (%d)",
mlx5_glue->port_state_str(port_attr.state),
port_attr.state);
/* Allocate private eth device data. */
@@ -1199,7 +1217,7 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
priv->pci_dev = spawn->pci_dev;
priv->mtu = RTE_ETHER_MTU;
/* Some internal functions rely on Netlink sockets, open them now. */
- priv->nl_socket_rdma = mlx5_nl_init(NETLINK_RDMA);
+ priv->nl_socket_rdma = nl_rdma;
priv->nl_socket_route = mlx5_nl_init(NETLINK_ROUTE);
priv->representor = !!switch_info->representor;
priv->master = !!switch_info->master;
@@ -1910,8 +1928,6 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
mlx5_os_free_shared_dr(priv);
if (priv->nl_socket_route >= 0)
close(priv->nl_socket_route);
- if (priv->nl_socket_rdma >= 0)
- close(priv->nl_socket_rdma);
if (priv->vmwa_context)
mlx5_vlan_vmwa_exit(priv->vmwa_context);
if (eth_dev && priv->drop_queue.hrxq)
@@ -1935,6 +1951,8 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
}
if (sh)
mlx5_free_shared_dev_ctx(sh);
+ if (nl_rdma >= 0)
+ close(nl_rdma);
MLX5_ASSERT(err > 0);
rte_errno = err;
return NULL;
--
2.33.0
