Add flags for outer VLAN and include set port parameters. Add flags, which describe port and switch state for both double VLAN functionality and outer VLAN processing.
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynow...@intel.com> Signed-off-by: Robin Zhang <robinx.zh...@intel.com> --- drivers/net/i40e/base/i40e_adminq_cmd.h | 22 ++++++++++++++++++++-- 1 file changed, 20 insertions(+), 2 deletions(-) diff --git a/drivers/net/i40e/base/i40e_adminq_cmd.h b/drivers/net/i40e/base/i40e_adminq_cmd.h index af9dec1d7f..372dd71c3f 100644 --- a/drivers/net/i40e/base/i40e_adminq_cmd.h +++ b/drivers/net/i40e/base/i40e_adminq_cmd.h @@ -768,6 +768,7 @@ struct i40e_aqc_set_switch_config { #define I40E_AQ_SET_SWITCH_CFG_PROMISC 0x0001 #define I40E_AQ_SET_SWITCH_CFG_L2_FILTER 0x0002 #define I40E_AQ_SET_SWITCH_CFG_HW_ATR_EVICT 0x0004 +#define I40E_AQ_SET_SWITCH_CFG_OUTER_VLAN 0x0008 __le16 valid_flags; /* The ethertype in switch_tag is dropped on ingress and used * internally by the switch. Set this to zero for the default @@ -904,7 +905,7 @@ struct i40e_aqc_vsi_properties_data { u8 sec_reserved; /* VLAN section */ __le16 pvid; /* VLANS include priority bits */ - __le16 fcoe_pvid; + __le16 outer_vlan; u8 port_vlan_flags; #define I40E_AQ_VSI_PVLAN_MODE_SHIFT 0x00 #define I40E_AQ_VSI_PVLAN_MODE_MASK (0x03 << \ @@ -920,7 +921,24 @@ struct i40e_aqc_vsi_properties_data { #define I40E_AQ_VSI_PVLAN_EMOD_STR_UP 0x08 #define I40E_AQ_VSI_PVLAN_EMOD_STR 0x10 #define I40E_AQ_VSI_PVLAN_EMOD_NOTHING 0x18 - u8 pvlan_reserved[3]; + u8 outer_vlan_flags; +#define I40E_AQ_VSI_OVLAN_MODE_SHIFT 0x00 +#define I40E_AQ_VSI_OVLAN_MODE_MASK (0x03 << \ + I40E_AQ_VSI_OVLAN_MODE_SHIFT) +#define I40E_AQ_VSI_OVLAN_MODE_UNTAGGED 0x01 +#define I40E_AQ_VSI_OVLAN_MODE_TAGGED 0x02 +#define I40E_AQ_VSI_OVLAN_MODE_ALL 0x03 +#define I40E_AQ_VSI_OVLAN_INSERT_PVID 0x04 +#define I40E_AQ_VSI_OVLAN_EMOD_SHIFT 0x03 +#define I40E_AQ_VSI_OVLAN_EMOD_MASK (0x03 <<\ + I40E_AQ_VSI_OVLAN_EMOD_SHIFT) +#define I40E_AQ_VSI_OVLAN_EMOD_SHOW_ALL 0x00 +#define I40E_AQ_VSI_OVLAN_EMOD_SHOW_UP 0x01 +#define I40E_AQ_VSI_OVLAN_EMOD_HIDE_ALL 0x02 +#define I40E_AQ_VSI_OVLAN_EMOD_NOTHING 0x03 +#define I40E_AQ_VSI_OVLAN_CTRL_ENA 0x04 + + u8 pvlan_reserved[2]; /* ingress egress up sections */ __le32 ingress_table; /* bitmap, 3 bits per up */ #define I40E_AQ_VSI_UP_TABLE_UP0_SHIFT 0 -- 2.25.1