Hi,
> -----Original Message-----
> From: Bing Zhao <bi...@nvidia.com>
> Sent: Thursday, July 29, 2021 7:04 PM
> To: Slava Ovsiienko <viachesl...@nvidia.com>; Matan Azrad
> <ma...@nvidia.com>
> Cc: dev@dpdk.org; Ori Kam <or...@nvidia.com>; Raslan Darawsheh
> <rasl...@nvidia.com>; NBU-Contact-Thomas Monjalon
> <tho...@monjalon.net>
> Subject: [PATCH] net/mlx5: fix the EIR calculation
>
> Before the yellow color policy was supported, the only supported profile of
> metering is RFC2697 and EIR is not part of the profile.
> When creating a meter with this profile, the EIR part was always zero.
>
> After the yellow color policy supported and RFC2698 & 4115 support was
> introduced, EIR is relevant and should be calculated. Usually the EIR could
> not
> be zero and the formula for calculating CIR mantissa & exponent could be
> reused.
>
> The EIR could be 0 and then only green and red colors will be supported from
> the specification. Both the mantissa and exponent parts should be set to 0.
> Currently, the formula wrongly sets non-zero values for the EIR=0 case.
>
> Setting the mantissa and the exponent parts to zeros when EIR is 0 will solve
> the issue.
>
> Fixes: 33a7493c8df8 ("net/mlx5: support meter for trTCM profiles")
>
> Signed-off-by: Bing Zhao <bi...@nvidia.com>
> Acked-by: Matan Azrad <ma...@nvidia.com>
> ---
> drivers/net/mlx5/mlx5_flow_meter.c | 14 ++++++++++----
> 1 file changed, 10 insertions(+), 4 deletions(-)
>
Patch applied to next-net-mlx,
Kindest regards,
Raslan Darawsheh
