Acked-by: Helin Zhang <helin.zhang at intel.com>
> -----Original Message-----
> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Wenzhuo Lu
> Sent: Friday, June 5, 2015 1:22 PM
> To: dev at dpdk.org
> Subject: [dpdk-dev] [PATCH 00/26] update ixgbe base driver
>
> Short summary:
> *update copyright and readme
> *fix code comment, double from
> *fix typo error in code comment
> *check return value after calling
> *allow tunneled UDP and TCP frames to reach their destination *erase
> ixgbe_get_hi_status *provide unlocked I2C methods *reduce I2C retry count on
> X550 devices *issue firmware command when coming up *add logic to reset
> CS4227 when needed *restore ESDP settings after MAC reset *disable FEC to
> save power *set lan_id for non-PCIe devices *add SFP+ dual-speed support *add
> SW based LPLU support *fix flow control for KR backplane *new simplified
> x550em init flow *move I2C MUX function from ixgbe_x540.c to ixgbe_x550.c
> *change return value for ixgbe_setup_internal_phy_t_x550em
> *ixgbe_setup_internal_phy_x550em function clean-up *add x550em Auto neg
> Flow Control support *add x550em PHY interrupt and forced 1G/10G support
> *add link check support for x550em PHY *set lan_id before first I2C access
> *added x550em PHY reset function *block EEE setup on the interfaces which
> don't support EEE
>
> Wenzhuo Lu (26):
> ixgbe/base: update copyright and readme
> ixgbe/base: fix code comment, double from
> ixgbe/base: fix typo error in code comment
> ixgbe/base: check return value after calling
> ixgbe/base: allow tunneled UDP and TCP frames to reach their
> destination
> ixgbe/base: erase ixgbe_get_hi_status
> ixgbe/base: provide unlocked I2C methods
> ixgbe/base: reduce I2C retry count on X550 devices
> ixgbe/base: issue firmware command when coming up
> ixgbe/base: add logic to reset CS4227 when needed
> ixgbe/base: restore ESDP settings after MAC reset
> ixgbe/base: disable FEC(Forward Error Correction) to save power
> ixgbe/base: set lan_id for non-PCIe devices
> ixgbe/base: add SFP+ dual-speed support
> ixgbe/base: add SW based LPLU support
> ixgbe/base: fix flow control for KR backplane
> ixgbe/base: new simplified x550em init flow
> ixgbe/base: move I2C MUX function from ixgbe_x540.c to ixgbe_x550.c
> ixgbe/base: change return value for ixgbe_setup_internal_phy_t_x550em
> ixgbe/base: ixgbe_setup_internal_phy_x550em function clean-up
> ixgbe/base: add x550em Auto neg Flow Control support
> ixgbe/base: add x550em PHY interrupt and forced 1G/10G support
> ixgbe/base: add link check support for x550em PHY
> ixgbe/base: set lan_id before first I2C access
> ixgbe/base: added x550em PHY reset function
> ixgbe/base: block EEE(Energy Efficient Ethernet) setup on the
> interfaces that don't support EEE
>
> drivers/net/ixgbe/base/README | 4 +-
> drivers/net/ixgbe/base/ixgbe_82598.c | 7 +-
> drivers/net/ixgbe/base/ixgbe_82598.h | 2 +-
> drivers/net/ixgbe/base/ixgbe_82599.c | 191 +-----
> drivers/net/ixgbe/base/ixgbe_82599.h | 7 +-
> drivers/net/ixgbe/base/ixgbe_api.c | 141 +++-
> drivers/net/ixgbe/base/ixgbe_api.h | 16 +-
> drivers/net/ixgbe/base/ixgbe_common.c | 270 +++++++-
> drivers/net/ixgbe/base/ixgbe_common.h | 9 +-
> drivers/net/ixgbe/base/ixgbe_dcb.c | 2 +-
> drivers/net/ixgbe/base/ixgbe_dcb.h | 2 +-
> drivers/net/ixgbe/base/ixgbe_dcb_82598.c | 2 +-
> drivers/net/ixgbe/base/ixgbe_dcb_82598.h | 2 +-
> drivers/net/ixgbe/base/ixgbe_dcb_82599.c | 2 +-
> drivers/net/ixgbe/base/ixgbe_dcb_82599.h | 2 +-
> drivers/net/ixgbe/base/ixgbe_mbx.c | 2 +-
> drivers/net/ixgbe/base/ixgbe_mbx.h | 2 +-
> drivers/net/ixgbe/base/ixgbe_osdep.h | 2 +-
> drivers/net/ixgbe/base/ixgbe_phy.c | 215 ++++++-
> drivers/net/ixgbe/base/ixgbe_phy.h | 23 +-
> drivers/net/ixgbe/base/ixgbe_type.h | 70 +-
> drivers/net/ixgbe/base/ixgbe_vf.c | 3 +-
> drivers/net/ixgbe/base/ixgbe_vf.h | 2 +-
> drivers/net/ixgbe/base/ixgbe_x540.c | 32 +-
> drivers/net/ixgbe/base/ixgbe_x540.h | 2 +-
> drivers/net/ixgbe/base/ixgbe_x550.c | 1029
> ++++++++++++++++++++++++++----
> drivers/net/ixgbe/base/ixgbe_x550.h | 20 +-
> 27 files changed, 1646 insertions(+), 415 deletions(-)
>
> --
> 1.9.3
