This patch adds x550em Auto neg Flow Control support to
ixgbe_device_supports_autoneg_fc and sets the x550em setup_fc function
pointer to ixgbe_setup_fc_generic. ixgbe_setup_fc_generic is used for
x550em because flow control is setup on the external PHY via MDIO, when
ixgbe_setup_fc_X550em sets up flow control on the internal PHY.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu at intel.com>
---
drivers/net/ixgbe/base/ixgbe_common.c | 1 +
drivers/net/ixgbe/base/ixgbe_x550.c | 4 ++++
2 files changed, 5 insertions(+)
diff --git a/drivers/net/ixgbe/base/ixgbe_common.c
b/drivers/net/ixgbe/base/ixgbe_common.c
index 7a8eb6b..9e80722 100644
--- a/drivers/net/ixgbe/base/ixgbe_common.c
+++ b/drivers/net/ixgbe/base/ixgbe_common.c
@@ -185,6 +185,7 @@ bool ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw)
case IXGBE_DEV_ID_X540T:
case IXGBE_DEV_ID_X540T1:
case IXGBE_DEV_ID_X550T:
+ case IXGBE_DEV_ID_X550EM_X_10G_T:
supported = true;
break;
default:
diff --git a/drivers/net/ixgbe/base/ixgbe_x550.c
b/drivers/net/ixgbe/base/ixgbe_x550.c
index 669d0ce..9abe927 100644
--- a/drivers/net/ixgbe/base/ixgbe_x550.c
+++ b/drivers/net/ixgbe/base/ixgbe_x550.c
@@ -382,7 +382,11 @@ s32 ixgbe_init_ops_X550EM(struct ixgbe_hw *hw)
mac->ops.get_supported_physical_layer =
ixgbe_get_supported_physical_layer_X550em;
+ if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper)
+ mac->ops.setup_fc = ixgbe_setup_fc_generic;
+ else
mac->ops.setup_fc = ixgbe_setup_fc_X550em;
+
mac->ops.acquire_swfw_sync = ixgbe_acquire_swfw_sync_X550em;
mac->ops.release_swfw_sync = ixgbe_release_swfw_sync_X550em;
--
1.9.3
