Reviewed-by: Michael Shamis <michae...@marvell.com>

-----Original Message-----
From: dev <dev-boun...@dpdk.org> On Behalf Of lir...@marvell.com
Sent: Wednesday, December 2, 2020 12:12 PM
To: Jerin Jacob Kollanukkaran <jer...@marvell.com>
Cc: dev@dpdk.org; Liron Himi <lir...@marvell.com>
Subject: [dpdk-dev] [PATCH v1 27/38] net/mvpp2: dummy pool creation

From: Liron Himi <lir...@marvell.com>

Currently the HW is configured with only one pool which its buffer size may be 
larger than the rx-fifo-size.
In that situation, frame size larger than the fifo-size is gets dropped due to 
fifo overrun.
this is cause because the HW works in cut-through mode which waits to have in 
the fifo at least the amount of bytes as define in the smallest pool's buffer 
size.

This patch add a dummy pool which its buffer size is very small (smaller than 
64B frame). this tricks the HW and any frame size is gets passed from the FIFO 
to the PP2.

Signed-off-by: Liron Himi <lir...@marvell.com>
---
 drivers/net/mvpp2/mrvl_ethdev.c | 71 ++++++++++++++++++++++++++-------  
drivers/net/mvpp2/mrvl_ethdev.h |  2 +
 drivers/net/mvpp2/mrvl_qos.c    |  1 +
 3 files changed, 60 insertions(+), 14 deletions(-)

diff --git a/drivers/net/mvpp2/mrvl_ethdev.c b/drivers/net/mvpp2/mrvl_ethdev.c 
index 127861a82..1f9489d77 100644
--- a/drivers/net/mvpp2/mrvl_ethdev.c
+++ b/drivers/net/mvpp2/mrvl_ethdev.c
@@ -90,6 +90,8 @@ static int used_bpools[PP2_NUM_PKT_PROC] = {  static struct 
pp2_bpool *mrvl_port_to_bpool_lookup[RTE_MAX_ETHPORTS];
 static int 
mrvl_port_bpool_size[PP2_NUM_PKT_PROC][PP2_BPOOL_NUM_POOLS][RTE_MAX_LCORE];
 static uint64_t cookie_addr_high = MRVL_COOKIE_ADDR_INVALID;
+static int dummy_pool_id[PP2_NUM_PKT_PROC]; struct pp2_bpool 
+*dummy_pool[PP2_NUM_PKT_PROC] = {0};
 
 struct mrvl_ifnames {
        const char *names[PP2_NUM_ETH_PPIO * PP2_NUM_PKT_PROC]; @@ -189,6 
+191,19 @@ static struct {
        MRVL_XSTATS_TBL_ENTRY(tx_errors)
 };
 
+static inline int
+mrvl_reserve_bit(int *bitmap, int max)
+{
+       int n = sizeof(*bitmap) * 8 - __builtin_clz(*bitmap);
+
+       if (n >= max)
+               return -1;
+
+       *bitmap |= 1 << n;
+
+       return n;
+}
+
 /**
  * Initialize packet processor.
  *
@@ -199,6 +214,9 @@ static int
 mrvl_init_pp2(void)
 {
        struct pp2_init_params init_params;
+       struct pp2_bpool_params bpool_params;
+       char                    name[15];
+       int                     err, i;
 
        memset(&init_params, 0, sizeof(init_params));
        init_params.hif_reserved_map = MRVL_MUSDK_HIFS_RESERVED; @@ -207,7 
+225,36 @@ mrvl_init_pp2(void)
        if (mrvl_cfg && mrvl_cfg->pp2_cfg.prs_udfs.num_udfs)
                memcpy(&init_params.prs_udfs, &mrvl_cfg->pp2_cfg.prs_udfs,
                       sizeof(struct pp2_parse_udfs));
-       return pp2_init(&init_params);
+       err = pp2_init(&init_params);
+       if (err != 0) {
+               MRVL_LOG(ERR, "PP2 init failed");
+               return -1;
+       }
+
+       memset(dummy_pool, 0, sizeof(dummy_pool));
+       for (i = 0; i < pp2_get_num_inst(); i++) {
+               dummy_pool_id[i] = mrvl_reserve_bit(&used_bpools[i],
+                                            PP2_BPOOL_NUM_POOLS);
+               if (dummy_pool_id[i] < 0) {
+                       MRVL_LOG(ERR, "Can't find free pool\n");
+                       return -1;
+               }
+
+               memset(name, 0, sizeof(name));
+               snprintf(name, sizeof(name), "pool-%d:%d", i, dummy_pool_id[i]);
+               memset(&bpool_params, 0, sizeof(bpool_params));
+               bpool_params.match = name;
+               bpool_params.buff_len = MRVL_PKT_OFFS;
+               bpool_params.dummy_short_pool = 1;
+               err = pp2_bpool_init(&bpool_params, &dummy_pool[i]);
+               if (err != 0 || !dummy_pool[i]) {
+                       MRVL_LOG(ERR, "BPool init failed!\n");
+                       used_bpools[i] &= ~(1 << dummy_pool_id[i]);
+                       return -1;
+               }
+       }
+
+       return 0;
 }
 
 /**
@@ -219,6 +266,15 @@ mrvl_init_pp2(void)  static void
 mrvl_deinit_pp2(void)
 {
+       int i;
+
+       for (i = 0; i < PP2_NUM_PKT_PROC; i++) {
+               if (!dummy_pool[i])
+                       continue;
+               pp2_bpool_deinit(dummy_pool[i]);
+               used_bpools[i] &= ~(1 << dummy_pool_id[i]);
+       }
+
        pp2_deinit();
 }
 
@@ -259,19 +315,6 @@ mrvl_get_bpool_size(int pp2_id, int pool_id)
        return size;
 }
 
-static inline int
-mrvl_reserve_bit(int *bitmap, int max)
-{
-       int n = sizeof(*bitmap) * 8 - __builtin_clz(*bitmap);
-
-       if (n >= max)
-               return -1;
-
-       *bitmap |= 1 << n;
-
-       return n;
-}
-
 static int
 mrvl_init_hif(int core_id)
 {
diff --git a/drivers/net/mvpp2/mrvl_ethdev.h b/drivers/net/mvpp2/mrvl_ethdev.h 
index 5dbd8b46c..24dbe20d7 100644
--- a/drivers/net/mvpp2/mrvl_ethdev.h
+++ b/drivers/net/mvpp2/mrvl_ethdev.h
@@ -197,6 +197,8 @@ extern int mrvl_logtype;
        rte_log(RTE_LOG_ ## level, mrvl_logtype, "%s(): " fmt "\n", \
                __func__, ##args)
 
+extern struct pp2_bpool *dummy_pool[PP2_NUM_PKT_PROC];
+
 /**
  * Convert string to uint32_t with extra checks for result correctness.
  *
diff --git a/drivers/net/mvpp2/mrvl_qos.c b/drivers/net/mvpp2/mrvl_qos.c index 
f5275efc7..23a014ade 100644
--- a/drivers/net/mvpp2/mrvl_qos.c
+++ b/drivers/net/mvpp2/mrvl_qos.c
@@ -881,6 +881,7 @@ setup_tc(struct pp2_ppio_tc_params *param, uint8_t inqs,
 
        param->pkt_offset = MRVL_PKT_OFFS;
        param->pools[0][0] = bpool;
+       param->pools[0][1] = dummy_pool[bpool->pp2_id];
        param->default_color = color;
 
        inq_params = rte_zmalloc_socket("inq_params",
--
2.28.0

Reply via email to