> -----Original Message----- > From: dev <dev-boun...@dpdk.org> On Behalf Of David Marchand > Sent: Monday, December 7, 2020 6:55 PM > To: Xing, Beilei <beilei.x...@intel.com>; Guo, Jia <jia....@intel.com> > Cc: dev@dpdk.org; Kinsella, Ray <ray.kinse...@intel.com>; Andrew > Yourtchenko (ayourtch) <ayour...@cisco.com>; Juraj Linkeš > <juraj.lin...@pantheon.tech>; Yigit, Ferruh <ferruh.yi...@intel.com> > Subject: Re: [dpdk-dev] Faulty VF initialization during DPDK startup when > multiple DPDK instances use different VFs with the same PF > > On Mon, Dec 7, 2020 at 11:49 AM Juraj Linkeš <juraj.lin...@pantheon.tech> > wrote: > > > > Hi DPDK devs, > > > > A while back I've submitted this bug: > https://bugs.dpdk.org/show_bug.cgi?id=578 and now we have a pretty good > idea where the issue stems from. TL;DL: it seems to be in either XL710 > firmware > or i40e driver, with downstream effects which we may need to address in > DPDK. > > > > What is the issue? > > We're using an XL710 NIC with SR-IOV setup with multiple virtual functions > (VFs) that belong to the same physical function (PF). We're observing > intermittent failures when multiple DPDK EAL instances are trying to > initialize > different VFs from the PF. One of the failures looks like this: > > i40evf_check_api_version(): PF/VF API version mismatch:(0.0)-(1.1) > > > > This results in VPP (which uses DPDK to initialize these VFs) not being > > able to > use the VFs. There an associated syslog: > > > > [Thu Dec 3 02:30:56 2020] i40e 0000:05:00.1: Unable to send the message to > VF 49 aq_err 12 > > > > Digging in the sources we've found that this is the error message: > > > https://elixir.bootlin.com/linux/v4.15/source/drivers/net/ethernet/intel/i40ev > f/i40e_adminq_cmd.h#L115 > > > > This suggests it's an issue with either the driver or firmware and that > > leads us > to two questions: > > 1) Is this an expected condition to happen? What is the reason for this > contention and is it normal to have it, and what is the expected correct > behavior of the calling code?
aq_err 12 is I40E_AQ_RC_EBUSY, which is returned by firmware. It indicates mailbox is full and device is too busy to handle other requests. So when multiple DPDK instances are trying to initialize different VFs from the PF, there'll be many requirements from PF to firmware, it will be easy to full the mailbox. > > 2) If "yes" to the previous question - then, since the caller in this case > initialization code of DPDK, should we address it there (e.g. some retries or > a > lock)? I agree to use retry or lock to address it, but it should be addressed in kernel driver not DPDK, since the kernel PF is responsible for communicating with firmware. When there's aq_err 12 returned, PF should retry to send the AQ command to firmware. > > > > Are there any Intel (or SR-IOV) experts who could help with answering the > first question? Or is it possible that no matter what the expected behavior is > should we address it in DPDK? > > Added i40e maintainers. > > > -- > David Marchand
