From: Liron Himi <lir...@marvell.com>
extend the config file with 'start-hdr' field.
currently 'eth' (default) and 'dsa' headers are supported.
Signed-off-by: Liron Himi <lir...@marvell.com>
Reviewed-by: Liron Himi <lir...@marvell.com>
---
drivers/net/mvpp2/mrvl_ethdev.c | 4 ++
drivers/net/mvpp2/mrvl_qos.c | 65 ++++++++++++++++++++++++++-------
drivers/net/mvpp2/mrvl_qos.h | 1 +
3 files changed, 57 insertions(+), 13 deletions(-)
diff --git a/drivers/net/mvpp2/mrvl_ethdev.c b/drivers/net/mvpp2/mrvl_ethdev.c
index a03d39aee..d1bb4c35a 100644
--- a/drivers/net/mvpp2/mrvl_ethdev.c
+++ b/drivers/net/mvpp2/mrvl_ethdev.c
@@ -693,6 +693,10 @@ mrvl_dev_start(struct rte_eth_dev *dev)
snprintf(match, sizeof(match), "ppio-%d:%d",
priv->pp_id, priv->ppio_id);
priv->ppio_params.match = match;
+ priv->ppio_params.eth_start_hdr = PP2_PPIO_HDR_ETH;
+ if (mrvl_qos_cfg)
+ priv->ppio_params.eth_start_hdr =
+ mrvl_qos_cfg->port[dev->data->port_id].eth_start_hdr;
/*
* Calculate the minimum bpool size for refill feature as follows:
diff --git a/drivers/net/mvpp2/mrvl_qos.c b/drivers/net/mvpp2/mrvl_qos.c
index 7fd970309..976cb06a8 100644
--- a/drivers/net/mvpp2/mrvl_qos.c
+++ b/drivers/net/mvpp2/mrvl_qos.c
@@ -19,6 +19,10 @@
/* Parsing tokens. Defined conveniently, so that any correction is easy. */
#define MRVL_TOK_DEFAULT "default"
+#define MRVL_TOK_DSA_MODE "dsa_mode"
+#define MRVL_TOK_DSA_MODE_NONE "none"
+#define MRVL_TOK_DSA_MODE_DSA "dsa"
+#define MRVL_TOK_DSA_MODE_EXT_DSA "ext_dsa"
#define MRVL_TOK_DEFAULT_TC "default_tc"
#define MRVL_TOK_DSCP "dscp"
#define MRVL_TOK_MAPPING_PRIORITY "mapping_priority"
@@ -494,16 +498,19 @@ mrvl_get_qoscfg(const char *key __rte_unused, const char
*path,
const char *entry;
char sec_name[32];
- if (file == NULL)
- rte_exit(EXIT_FAILURE, "Cannot load configuration %s\n", path);
+ if (file == NULL) {
+ MRVL_LOG(ERR, "Cannot load configuration %s\n", path);
+ return -1;
+ }
/* Create configuration. This is never accessed on the fast path,
* so we can ignore socket.
*/
*cfg = rte_zmalloc("mrvl_qos_cfg", sizeof(struct mrvl_qos_cfg), 0);
- if (*cfg == NULL)
- rte_exit(EXIT_FAILURE, "Cannot allocate configuration %s\n",
- path);
+ if (*cfg == NULL) {
+ MRVL_LOG(ERR, "Cannot allocate configuration %s\n", path);
+ return -1;
+ }
n = rte_cfgfile_num_sections(file, MRVL_TOK_PORT,
sizeof(MRVL_TOK_PORT) - 1);
@@ -528,6 +535,31 @@ mrvl_get_qoscfg(const char *key __rte_unused, const char
*path,
continue;
}
+ entry = rte_cfgfile_get_entry(file, sec_name,
+ MRVL_TOK_DSA_MODE);
+ if (entry) {
+ if (!strncmp(entry, MRVL_TOK_DSA_MODE_NONE,
+ sizeof(MRVL_TOK_DSA_MODE_NONE)))
+ (*cfg)->port[n].eth_start_hdr =
+ PP2_PPIO_HDR_ETH;
+ else if (!strncmp(entry, MRVL_TOK_DSA_MODE_DSA,
+ sizeof(MRVL_TOK_DSA_MODE_DSA)))
+ (*cfg)->port[n].eth_start_hdr =
+ PP2_PPIO_HDR_ETH_DSA;
+ else if (!strncmp(entry, MRVL_TOK_DSA_MODE_EXT_DSA,
+ sizeof(MRVL_TOK_DSA_MODE_EXT_DSA))) {
+ (*cfg)->port[n].eth_start_hdr =
+ PP2_PPIO_HDR_ETH_EXT_DSA;
+ } else {
+ MRVL_LOG(ERR,
+ "Error in parsing %s value (%s)!\n",
+ MRVL_TOK_DSA_MODE, entry);
+ return -1;
+ }
+ } else {
+ (*cfg)->port[n].eth_start_hdr = PP2_PPIO_HDR_ETH;
+ }
+
/*
* Read per-port rate limiting. Setting that will
* disable per-queue rate limiting.
@@ -575,13 +607,15 @@ mrvl_get_qoscfg(const char *key __rte_unused, const char
*path,
(*cfg)->port[n].mapping_priority =
PP2_CLS_QOS_TBL_IP_PRI;
else if (!strncmp(entry, MRVL_TOK_VLAN,
- sizeof(MRVL_TOK_VLAN)))
+ sizeof(MRVL_TOK_VLAN))) {
(*cfg)->port[n].mapping_priority =
PP2_CLS_QOS_TBL_VLAN_PRI;
- else
- rte_exit(EXIT_FAILURE,
+ } else {
+ MRVL_LOG(ERR,
"Error in parsing %s value (%s)!\n",
MRVL_TOK_MAPPING_PRIORITY, entry);
+ return -1;
+ }
} else {
(*cfg)->port[n].mapping_priority =
PP2_CLS_QOS_TBL_VLAN_IP_PRI;
@@ -604,18 +638,22 @@ mrvl_get_qoscfg(const char *key __rte_unused, const char
*path,
for (i = 0; i < MRVL_PP2_RXQ_MAX; ++i) {
ret = get_outq_cfg(file, n, i, *cfg);
- if (ret < 0)
- rte_exit(EXIT_FAILURE,
+ if (ret < 0) {
+ MRVL_LOG(ERR,
"Error %d parsing port %d outq %d!\n",
ret, n, i);
+ return -1;
+ }
}
for (i = 0; i < MRVL_PP2_TC_MAX; ++i) {
ret = parse_tc_cfg(file, n, i, *cfg);
- if (ret < 0)
- rte_exit(EXIT_FAILURE,
+ if (ret < 0) {
+ MRVL_LOG(ERR,
"Error %d parsing port %d tc %d!\n",
ret, n, i);
+ return -1;
+ }
}
entry = rte_cfgfile_get_entry(file, sec_name,
@@ -628,7 +666,8 @@ mrvl_get_qoscfg(const char *key __rte_unused, const char
*path,
} else {
if ((*cfg)->port[n].use_global_defaults == 0) {
MRVL_LOG(ERR,
- "Default Traffic Class required in
custom configuration!");
+ "Default Traffic Class required in "
+ "custom configuration!");
return -1;
}
}
diff --git a/drivers/net/mvpp2/mrvl_qos.h b/drivers/net/mvpp2/mrvl_qos.h
index f03e7731c..0934752cf 100644
--- a/drivers/net/mvpp2/mrvl_qos.h
+++ b/drivers/net/mvpp2/mrvl_qos.h
@@ -20,6 +20,7 @@
/* QoS config. */
struct mrvl_qos_cfg {
struct port_cfg {
+ enum pp2_ppio_eth_start_hdr eth_start_hdr;
int rate_limit_enable;
struct pp2_ppio_rate_limit_params rate_limit_params;
struct {
--
2.28.0
