> -----邮件原件-----
> 发件人: Wang, Haiyue <haiyue.w...@intel.com>
> 发送时间: 2020年11月18日 16:15
> 收件人: Feifei Wang <feifei.wa...@arm.com>; jer...@marvell.com; Ruifeng
> Wang <ruifeng.w...@arm.com>; Guo, Jia <jia....@intel.com>
> 抄送: dev@dpdk.org; nd <n...@arm.com>; nd <n...@arm.com>
> 主题: RE: [PATCH v1 3/4] net/ixgbe: implement good checksum flag for NEON
> vector
>
> > -----Original Message-----
> > From: Feifei Wang <feifei.wa...@arm.com>
> > Sent: Wednesday, November 18, 2020 15:56
> > To: Wang, Haiyue <haiyue.w...@intel.com>; jer...@marvell.com; Ruifeng
> > Wang <ruifeng.w...@arm.com>; Guo, Jia <jia....@intel.com>
> > Cc: dev@dpdk.org; nd <n...@arm.com>; nd <n...@arm.com>
> > Subject: 回复: [PATCH v1 3/4] net/ixgbe: implement good checksum flag
> > for NEON vector
> >
> > Hi, Haiyue
> >
> > > -----邮件原件-----
> > > 发件人: Wang, Haiyue <haiyue.w...@intel.com>
> > > 发送时间: 2020年11月18日 15:22
> > > 收件人: Feifei Wang <feifei.wa...@arm.com>; jer...@marvell.com;
> Ruifeng
> > > Wang <ruifeng.w...@arm.com>; Guo, Jia <jia....@intel.com>
> > > 抄送: dev@dpdk.org; nd <n...@arm.com>
> > > 主题: RE: [PATCH v1 3/4] net/ixgbe: implement good checksum flag for
> > > NEON vector
> > >
> > > > -----Original Message-----
> > > > From: Feifei Wang <feifei.wa...@arm.com>
> > > > Sent: Wednesday, November 18, 2020 14:29
> > > > To: Jerin Jacob <jer...@marvell.com>; Ruifeng Wang
> > > > <ruifeng.w...@arm.com>; Guo, Jia <jia....@intel.com>; Wang, Haiyue
> > > > <haiyue.w...@intel.com>
> > > > Cc: dev@dpdk.org; n...@arm.com; feiwan02 <feifei.wa...@arm.com>
> > > > Subject: [PATCH v1 3/4] net/ixgbe: implement good checksum flag
> > > > for NEON vector
> > > >
> > > > From: feiwan02 <feifei.wa...@arm.com>
> > > >
> > > > Add CKSUM_GOOD flag to distinguish a good checksum from an unknown
> > > one
> > > > in neon vertor RX function.
> > > >
> > > > Test Results:
> > > > NICs: 82599(igb)
> > > > Dirver: ixgbe(vector)
> > > > Packet: IPv4_checksum = correct value && UDP_checksum = correct
> > > > value
> > > >
> > > > $:./app/dpdk-testpmd -c 0x3 -w 0002:f9:00.0 -- -i
> > > > --port-topology=chained
> > > > test-pmd> set fwd rxonly
> > > > test-pmd> set verbose 1
> > > > test-pmd> start
> > > >
> > > > With this patch:
> > > > testpmd> port 0/queue 0: received 1 packets
> > > > src=00:00:00:00:00:02 - dst=00:00:00:00:00:01 - type=0x0800 -
> > > > length=70 - nb_segs=1
> > > > ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD
> > > >
> > > > Without this patch:
> > > > testpmd> port 0/queue 0: received 1 packets
> > > > src=00:00:00:00:00:02 - dst=00:00:00:00:00:01 - type=0x0800 -
> > > > length=70 - nb_segs=1
> > > > ol_flags: PKT_RX_L4_CKSUM_UNKNOWN PKT_RX_IP_CKSUM_UNKNOWN
> > > >
> > >
> > > How about to merge "1 & 2" and "3 & 4"? Then you will have the above
> > > test result. ;-)
> > Do you mean that combine patch 1 and patch 2 into one patch to support
> > vlan stripping and bad checksum flag, Then also do the same work for
> > patch 3 and patch 4 to support good checksum flag and enable IXGBE
> > neon vector when DEV_RX_OFFLOAD_CHECKSUM is set?
> >
> > Actually, the test results are achieved without patch 4, due to that
> > testpmd does not check rxmode-
> > >offloads, it will call IXGBE NEON vector function directly. And this
> > >change
> > is for the default config of l3fwd example.
> >
>
> I was messed by the vector code, sorry. Patch b is for bad checksum, update
> the
> commit message to align your design. Then the patch set is OF for me, thanks!
>
> Feifei Wang (4):
> a). net/ixgbe: add VLAN stripping support for Arm
> b). net/ixgbe: support checksum flags for NEON vector
> c). net/ixgbe: implement good checksum flag for NEON vector
> d). net/ixgbe: enable IXGBE NEON vector PMD when CHECKSUM is set
>
That's all right. I will update the commit message and then upload the new
version.
Thanks for your attention.
> > Best Regards
> > Feifei
> > >
> > > > Signed-off-by: Feifei Wang <feifei.wa...@arm.com>
> > > > Reviewed-by: Ruifeng Wang <ruifeng.w...@arm.com>
> > > > ---
> > > > 2.17.1
