On Wed, Oct 14, 2020 at 3:07 AM Ajit Khaparde
<ajit.khapa...@broadcom.com> wrote:
>
> On Tue, Oct 13, 2020 at 1:43 PM Ferruh Yigit <ferruh.yi...@intel.com> wrote:
> >
> > On 10/13/2020 7:28 PM, Jerin Jacob wrote:
> > > On Tue, Oct 13, 2020 at 4:18 AM Rasesh Mody <rm...@marvell.com> wrote:
> > >>
> > >> Add QLogic vendor id support for BCM57840 device ids.
> > >>
> > >> Fixes: 9fb557035d90 ("bnx2x: enable PMD build")
> > >> Cc: sta...@dpdk.org
> > >>
> > >> Reported-by: Souvik Dey <so...@rbbn.com>
> > >> Signed-off-by: Rasesh Mody <rm...@marvell.com>
> > >
> > >
> > > There was an error from CI on Broadcom CI,
> > > Since this patch is about Broadcom PMD fix, Do we need to worry about
> > > this?
> > > http://mails.dpdk.org/archives/test-report/2020-October/158246.html
> > >
> >
> > Errors shouldn't be related to this patch, so I think error can be ignored
> > for
> > this patch.
> +1
>
> >
> > But added Ajit & lab for the issue.
> I have seen this behavior earlier.
> It showed up randomly on some patches which are not even
> related to Broadcom PMD. I will try to keep an eye on it.
Applied to dpdk-next-net-mrvl/for-main. Thanks
>
> >
> > >
> > >> ---
> > >> drivers/net/bnx2x/bnx2x_ethdev.c | 4 ++++
> > >> 1 file changed, 4 insertions(+)
> > >>
> > >> diff --git a/drivers/net/bnx2x/bnx2x_ethdev.c
> > >> b/drivers/net/bnx2x/bnx2x_ethdev.c
> > >> index 40225b2f4..ce9df8748 100644
> > >> --- a/drivers/net/bnx2x/bnx2x_ethdev.c
> > >> +++ b/drivers/net/bnx2x/bnx2x_ethdev.c
> > >> @@ -17,6 +17,7 @@
> > >> * The set of PCI devices this driver supports
> > >> */
> > >> #define BROADCOM_PCI_VENDOR_ID 0x14E4
> > >> +#define QLOGIC_PCI_VENDOR_ID 0x1077
> > >> static const struct rte_pci_id pci_id_bnx2x_map[] = {
> > >> { RTE_PCI_DEVICE(BROADCOM_PCI_VENDOR_ID, CHIP_NUM_57800) },
> > >> { RTE_PCI_DEVICE(BROADCOM_PCI_VENDOR_ID, CHIP_NUM_57711) },
> > >> @@ -24,11 +25,13 @@ static const struct rte_pci_id pci_id_bnx2x_map[] = {
> > >> { RTE_PCI_DEVICE(BROADCOM_PCI_VENDOR_ID, CHIP_NUM_57811) },
> > >> { RTE_PCI_DEVICE(BROADCOM_PCI_VENDOR_ID, CHIP_NUM_57840_OBS) },
> > >> { RTE_PCI_DEVICE(BROADCOM_PCI_VENDOR_ID, CHIP_NUM_57840_4_10) },
> > >> + { RTE_PCI_DEVICE(QLOGIC_PCI_VENDOR_ID, CHIP_NUM_57840_4_10) },
> > >> { RTE_PCI_DEVICE(BROADCOM_PCI_VENDOR_ID, CHIP_NUM_57840_2_20) },
> > >> #ifdef RTE_LIBRTE_BNX2X_MF_SUPPORT
> > >> { RTE_PCI_DEVICE(BROADCOM_PCI_VENDOR_ID, CHIP_NUM_57810_MF) },
> > >> { RTE_PCI_DEVICE(BROADCOM_PCI_VENDOR_ID, CHIP_NUM_57811_MF) },
> > >> { RTE_PCI_DEVICE(BROADCOM_PCI_VENDOR_ID, CHIP_NUM_57840_MF) },
> > >> + { RTE_PCI_DEVICE(QLOGIC_PCI_VENDOR_ID, CHIP_NUM_57840_MF) },
> > >> #endif
> > >> { .vendor_id = 0, }
> > >> };
> > >> @@ -38,6 +41,7 @@ static const struct rte_pci_id pci_id_bnx2xvf_map[] = {
> > >> { RTE_PCI_DEVICE(BROADCOM_PCI_VENDOR_ID, CHIP_NUM_57810_VF) },
> > >> { RTE_PCI_DEVICE(BROADCOM_PCI_VENDOR_ID, CHIP_NUM_57811_VF) },
> > >> { RTE_PCI_DEVICE(BROADCOM_PCI_VENDOR_ID, CHIP_NUM_57840_VF) },
> > >> + { RTE_PCI_DEVICE(QLOGIC_PCI_VENDOR_ID, CHIP_NUM_57840_VF) },
> > >> { .vendor_id = 0, }
> > >> };
> > >>
> > >> --
> > >> 2.18.0
> > >>
> >
