Hi Tom, > From: Tom Rix <t...@redhat.com> > On 9/28/20 5:29 PM, Nicolas Chautru wrote: > > Debug functions to validate the input API from user Only enabled in > > DEBUG mode at build time > > > > Signed-off-by: Nicolas Chautru <nicolas.chau...@intel.com> > > Acked-by: Liu Tianjiao <tianjiao....@intel.com> > > --- > > drivers/baseband/acc100/rte_acc100_pmd.c | 424 > > +++++++++++++++++++++++++++++++ > > 1 file changed, 424 insertions(+) > > > > diff --git a/drivers/baseband/acc100/rte_acc100_pmd.c > > b/drivers/baseband/acc100/rte_acc100_pmd.c > > index b6d9e7c..3589814 100644 > > --- a/drivers/baseband/acc100/rte_acc100_pmd.c > > +++ b/drivers/baseband/acc100/rte_acc100_pmd.c > > @@ -1945,6 +1945,231 @@ > > > > } > > > > +#ifdef RTE_LIBRTE_BBDEV_DEBUG > > +/* Validates turbo encoder parameters */ static inline int > > +validate_enc_op(struct rte_bbdev_enc_op *op) { > > + struct rte_bbdev_op_turbo_enc *turbo_enc = &op->turbo_enc; > > + struct rte_bbdev_op_enc_turbo_cb_params *cb = NULL; > > + struct rte_bbdev_op_enc_turbo_tb_params *tb = NULL; > > + uint16_t kw, kw_neg, kw_pos; > > + > > + if (op->mempool == NULL) { > > + rte_bbdev_log(ERR, "Invalid mempool pointer"); > > + return -1; > > + } > > + if (turbo_enc->input.data == NULL) { > > + rte_bbdev_log(ERR, "Invalid input pointer"); > > + return -1; > > + } > > + if (turbo_enc->output.data == NULL) { > > + rte_bbdev_log(ERR, "Invalid output pointer"); > > + return -1; > > + } > > + if (turbo_enc->rv_index > 3) { > > + rte_bbdev_log(ERR, > > + "rv_index (%u) is out of range 0 <= value <= > 3", > > + turbo_enc->rv_index); > > + return -1; > > + } > > + if (turbo_enc->code_block_mode != 0 && > > + turbo_enc->code_block_mode != 1) { > > + rte_bbdev_log(ERR, > > + "code_block_mode (%u) is out of range 0 <= > value <= 1", > > + turbo_enc->code_block_mode); > > + return -1; > > + } > > + > > + if (turbo_enc->code_block_mode == 0) { > > + tb = &turbo_enc->tb_params; > > + if ((tb->k_neg < RTE_BBDEV_TURBO_MIN_CB_SIZE > > + || tb->k_neg > > RTE_BBDEV_TURBO_MAX_CB_SIZE) > > + && tb->c_neg > 0) { > > + rte_bbdev_log(ERR, > > + "k_neg (%u) is out of range %u <= > value <= %u", > > + tb->k_neg, > RTE_BBDEV_TURBO_MIN_CB_SIZE, > > + RTE_BBDEV_TURBO_MAX_CB_SIZE); > > + return -1; > > + } > > + if (tb->k_pos < RTE_BBDEV_TURBO_MIN_CB_SIZE > > + || tb->k_pos > > RTE_BBDEV_TURBO_MAX_CB_SIZE) { > > + rte_bbdev_log(ERR, > > + "k_pos (%u) is out of range %u <= > value <= %u", > > + tb->k_pos, > RTE_BBDEV_TURBO_MIN_CB_SIZE, > > + RTE_BBDEV_TURBO_MAX_CB_SIZE); > > + return -1; > > + } > > + if (tb->c_neg > (RTE_BBDEV_TURBO_MAX_CODE_BLOCKS - > 1)) > > + rte_bbdev_log(ERR, > > + "c_neg (%u) is out of range 0 <= value > <= %u", > > + tb->c_neg, > > + > RTE_BBDEV_TURBO_MAX_CODE_BLOCKS - 1); > > + if (tb->c < 1 || tb->c > > RTE_BBDEV_TURBO_MAX_CODE_BLOCKS) { > > + rte_bbdev_log(ERR, > > + "c (%u) is out of range 1 <= value <= > %u", > > + tb->c, > RTE_BBDEV_TURBO_MAX_CODE_BLOCKS); > > + return -1; > > + } > > + if (tb->cab > tb->c) { > > + rte_bbdev_log(ERR, > > + "cab (%u) is greater than c (%u)", > > + tb->cab, tb->c); > > + return -1; > > + } > > + if ((tb->ea < RTE_BBDEV_TURBO_MIN_CB_SIZE || (tb->ea % > 2)) > > + && tb->r < tb->cab) { > > + rte_bbdev_log(ERR, > > + "ea (%u) is less than %u or it is not > even", > > + tb->ea, > RTE_BBDEV_TURBO_MIN_CB_SIZE); > > + return -1; > > + } > > + if ((tb->eb < RTE_BBDEV_TURBO_MIN_CB_SIZE || (tb->eb % > 2)) > > + && tb->c > tb->cab) { > > + rte_bbdev_log(ERR, > > + "eb (%u) is less than %u or it is not > even", > > + tb->eb, > RTE_BBDEV_TURBO_MIN_CB_SIZE); > > + return -1; > > + } > > + > > + kw_neg = 3 * RTE_ALIGN_CEIL(tb->k_neg + 4, > > + RTE_BBDEV_TURBO_C_SUBBLOCK); > > + if (tb->ncb_neg < tb->k_neg || tb->ncb_neg > kw_neg) { > > + rte_bbdev_log(ERR, > > + "ncb_neg (%u) is out of range (%u) > k_neg <= value <= (%u) kw_neg", > > + tb->ncb_neg, tb->k_neg, kw_neg); > > + return -1; > > + } > > + > > + kw_pos = 3 * RTE_ALIGN_CEIL(tb->k_pos + 4, > > + RTE_BBDEV_TURBO_C_SUBBLOCK); > > + if (tb->ncb_pos < tb->k_pos || tb->ncb_pos > kw_pos) { > > + rte_bbdev_log(ERR, > > + "ncb_pos (%u) is out of range (%u) > k_pos <= value <= (%u) kw_pos", > > + tb->ncb_pos, tb->k_pos, kw_pos); > > + return -1; > > + } > > + if (tb->r > (tb->c - 1)) { > > + rte_bbdev_log(ERR, > > + "r (%u) is greater than c - 1 (%u)", > > + tb->r, tb->c - 1); > > + return -1; > > + } > > + } else { > > + cb = &turbo_enc->cb_params; > > + if (cb->k < RTE_BBDEV_TURBO_MIN_CB_SIZE > > + || cb->k > > RTE_BBDEV_TURBO_MAX_CB_SIZE) { > > + rte_bbdev_log(ERR, > > + "k (%u) is out of range %u <= value <= > %u", > > + cb->k, > RTE_BBDEV_TURBO_MIN_CB_SIZE, > > + RTE_BBDEV_TURBO_MAX_CB_SIZE); > > + return -1; > > + } > > + > > + if (cb->e < RTE_BBDEV_TURBO_MIN_CB_SIZE || (cb->e % 2)) > { > > + rte_bbdev_log(ERR, > > + "e (%u) is less than %u or it is not > even", > > + cb->e, > RTE_BBDEV_TURBO_MIN_CB_SIZE); > > + return -1; > > + } > > + > > + kw = RTE_ALIGN_CEIL(cb->k + 4, > RTE_BBDEV_TURBO_C_SUBBLOCK) * 3; > > + if (cb->ncb < cb->k || cb->ncb > kw) { > > + rte_bbdev_log(ERR, > > + "ncb (%u) is out of range (%u) k <= > value <= (%u) kw", > > + cb->ncb, cb->k, kw); > > + return -1; > > + } > > + } > > + > > + return 0; > > +} > > +/* Validates LDPC encoder parameters */ static inline int > > +validate_ldpc_enc_op(struct rte_bbdev_enc_op *op) { > > + struct rte_bbdev_op_ldpc_enc *ldpc_enc = &op->ldpc_enc; > > + > > + if (op->mempool == NULL) { > > + rte_bbdev_log(ERR, "Invalid mempool pointer"); > > + return -1; > > + } > > + if (ldpc_enc->input.data == NULL) { > > + rte_bbdev_log(ERR, "Invalid input pointer"); > > + return -1; > > + } > > + if (ldpc_enc->output.data == NULL) { > > + rte_bbdev_log(ERR, "Invalid output pointer"); > > + return -1; > > + } > > + if (ldpc_enc->input.length > > > + RTE_BBDEV_LDPC_MAX_CB_SIZE >> 3) { > > + rte_bbdev_log(ERR, "CB size (%u) is too big, max: %d", > > + ldpc_enc->input.length, > > + RTE_BBDEV_LDPC_MAX_CB_SIZE); > > + return -1; > > + } > > + if ((ldpc_enc->basegraph > 2) || (ldpc_enc->basegraph == 0)) { > > + rte_bbdev_log(ERR, > > + "BG (%u) is out of range 1 <= value <= 2", > > + ldpc_enc->basegraph); > > + return -1; > > + } > > + if (ldpc_enc->rv_index > 3) { > > + rte_bbdev_log(ERR, > > + "rv_index (%u) is out of range 0 <= value <= > 3", > > + ldpc_enc->rv_index); > > + return -1; > > + } > > + if (ldpc_enc->code_block_mode > 1) { > > + rte_bbdev_log(ERR, > > + "code_block_mode (%u) is out of range 0 <= > value <= 1", > > + ldpc_enc->code_block_mode); > > + return -1; > > + } > > + > > + return 0; > > +} > > + > > +/* Validates LDPC decoder parameters */ static inline int > > +validate_ldpc_dec_op(struct rte_bbdev_dec_op *op) { > > + struct rte_bbdev_op_ldpc_dec *ldpc_dec = &op->ldpc_dec; > > + > > + if (op->mempool == NULL) { > > + rte_bbdev_log(ERR, "Invalid mempool pointer"); > > + return -1; > > + } > > + if ((ldpc_dec->basegraph > 2) || (ldpc_dec->basegraph == 0)) { > > + rte_bbdev_log(ERR, > > + "BG (%u) is out of range 1 <= value <= 2", > > + ldpc_dec->basegraph); > > + return -1; > > + } > > + if (ldpc_dec->iter_max == 0) { > > + rte_bbdev_log(ERR, > > + "iter_max (%u) is equal to 0", > > + ldpc_dec->iter_max); > > + return -1; > > + } > > + if (ldpc_dec->rv_index > 3) { > > + rte_bbdev_log(ERR, > > + "rv_index (%u) is out of range 0 <= value <= > 3", > > + ldpc_dec->rv_index); > > + return -1; > > + } > > + if (ldpc_dec->code_block_mode > 1) { > > + rte_bbdev_log(ERR, > > + "code_block_mode (%u) is out of range 0 <= > value <= 1", > > + ldpc_dec->code_block_mode); > > + return -1; > > + } > > + > > + return 0; > > +} > > +#endif > Could have an #else with stubs so the users do not have to bother with > #ifdef decorations
I see what you mean. Debatable. But given this is done the same way for other bbdev driver I would rather keep consistency. > > + > > /* Enqueue one encode operations for ACC100 device in CB mode */ > > static inline int enqueue_enc_one_op_cb(struct acc100_queue *q, > > struct rte_bbdev_enc_op *op, @@ -1956,6 +2181,14 @@ > > seg_total_left; > > struct rte_mbuf *input, *output_head, *output; > > > > +#ifdef RTE_LIBRTE_BBDEV_DEBUG > > + /* Validate op structure */ > > + if (validate_enc_op(op) == -1) { > > + rte_bbdev_log(ERR, "Turbo encoder validation failed"); > > + return -EINVAL; > > + } > > +#endif > > + > > uint16_t desc_idx = ((q->sw_ring_head + total_enqueued_cbs) > > & q->sw_ring_wrap_mask); > > desc = q->ring_addr + desc_idx; > > @@ -2008,6 +2241,14 @@ > > uint16_t in_length_in_bytes; > > struct rte_bbdev_op_ldpc_enc *enc = &ops[0]->ldpc_enc; > > > > +#ifdef RTE_LIBRTE_BBDEV_DEBUG > > + /* Validate op structure */ > > + if (validate_ldpc_enc_op(ops[0]) == -1) { > > + rte_bbdev_log(ERR, "LDPC encoder validation failed"); > > + return -EINVAL; > > + } > > +#endif > > + > > uint16_t desc_idx = ((q->sw_ring_head + total_enqueued_cbs) > > & q->sw_ring_wrap_mask); > > desc = q->ring_addr + desc_idx; > > @@ -2065,6 +2306,14 @@ > > seg_total_left; > > struct rte_mbuf *input, *output_head, *output; > > > > +#ifdef RTE_LIBRTE_BBDEV_DEBUG > > + /* Validate op structure */ > > + if (validate_ldpc_enc_op(op) == -1) { > > + rte_bbdev_log(ERR, "LDPC encoder validation failed"); > > + return -EINVAL; > > + } > > +#endif > > + > > uint16_t desc_idx = ((q->sw_ring_head + total_enqueued_cbs) > > & q->sw_ring_wrap_mask); > > desc = q->ring_addr + desc_idx; > > @@ -2119,6 +2368,14 @@ > > struct rte_mbuf *input, *output_head, *output; > > uint16_t current_enqueued_cbs = 0; > > > > +#ifdef RTE_LIBRTE_BBDEV_DEBUG > > + /* Validate op structure */ > > + if (validate_enc_op(op) == -1) { > > + rte_bbdev_log(ERR, "Turbo encoder validation failed"); > > + return -EINVAL; > > + } > > +#endif > > + > > uint16_t desc_idx = ((q->sw_ring_head + total_enqueued_cbs) > > & q->sw_ring_wrap_mask); > > desc = q->ring_addr + desc_idx; > > @@ -2191,6 +2448,142 @@ > > return current_enqueued_cbs; > > } > > > > +#ifdef RTE_LIBRTE_BBDEV_DEBUG > > +/* Validates turbo decoder parameters */ static inline int > > +validate_dec_op(struct rte_bbdev_dec_op *op) { > > This (guessing) later dec validation share similar code with enc validation, > consider function for the common parts. They have different API really, a few checks only have common range checks. So not convinced it would help personnaly. Thanks > > Tom > > > + struct rte_bbdev_op_turbo_dec *turbo_dec = &op->turbo_dec; > > + struct rte_bbdev_op_dec_turbo_cb_params *cb = NULL; > > + struct rte_bbdev_op_dec_turbo_tb_params *tb = NULL; > > + > > + if (op->mempool == NULL) { > > + rte_bbdev_log(ERR, "Invalid mempool pointer"); > > + return -1; > > + } > > + if (turbo_dec->input.data == NULL) { > > + rte_bbdev_log(ERR, "Invalid input pointer"); > > + return -1; > > + } > > + if (turbo_dec->hard_output.data == NULL) { > > + rte_bbdev_log(ERR, "Invalid hard_output pointer"); > > + return -1; > > + } > > + if (check_bit(turbo_dec->op_flags, > RTE_BBDEV_TURBO_SOFT_OUTPUT) && > > + turbo_dec->soft_output.data == NULL) { > > + rte_bbdev_log(ERR, "Invalid soft_output pointer"); > > + return -1; > > + } > > + if (turbo_dec->rv_index > 3) { > > + rte_bbdev_log(ERR, > > + "rv_index (%u) is out of range 0 <= value <= > 3", > > + turbo_dec->rv_index); > > + return -1; > > + } > > + if (turbo_dec->iter_min < 1) { > > + rte_bbdev_log(ERR, > > + "iter_min (%u) is less than 1", > > + turbo_dec->iter_min); > > + return -1; > > + } > > + if (turbo_dec->iter_max <= 2) { > > + rte_bbdev_log(ERR, > > + "iter_max (%u) is less than or equal to 2", > > + turbo_dec->iter_max); > > + return -1; > > + } > > + if (turbo_dec->iter_min > turbo_dec->iter_max) { > > + rte_bbdev_log(ERR, > > + "iter_min (%u) is greater than iter_max > (%u)", > > + turbo_dec->iter_min, turbo_dec->iter_max); > > + return -1; > > + } > > + if (turbo_dec->code_block_mode != 0 && > > + turbo_dec->code_block_mode != 1) { > > + rte_bbdev_log(ERR, > > + "code_block_mode (%u) is out of range 0 <= > value <= 1", > > + turbo_dec->code_block_mode); > > + return -1; > > + } > > + > > + if (turbo_dec->code_block_mode == 0) { > > + tb = &turbo_dec->tb_params; > > + if ((tb->k_neg < RTE_BBDEV_TURBO_MIN_CB_SIZE > > + || tb->k_neg > > RTE_BBDEV_TURBO_MAX_CB_SIZE) > > + && tb->c_neg > 0) { > > + rte_bbdev_log(ERR, > > + "k_neg (%u) is out of range %u <= > value <= %u", > > + tb->k_neg, > RTE_BBDEV_TURBO_MIN_CB_SIZE, > > + RTE_BBDEV_TURBO_MAX_CB_SIZE); > > + return -1; > > + } > > + if ((tb->k_pos < RTE_BBDEV_TURBO_MIN_CB_SIZE > > + || tb->k_pos > > RTE_BBDEV_TURBO_MAX_CB_SIZE) > > + && tb->c > tb->c_neg) { > > + rte_bbdev_log(ERR, > > + "k_pos (%u) is out of range %u <= > value <= %u", > > + tb->k_pos, > RTE_BBDEV_TURBO_MIN_CB_SIZE, > > + RTE_BBDEV_TURBO_MAX_CB_SIZE); > > + return -1; > > + } > > + if (tb->c_neg > (RTE_BBDEV_TURBO_MAX_CODE_BLOCKS - > 1)) > > + rte_bbdev_log(ERR, > > + "c_neg (%u) is out of range 0 <= value > <= %u", > > + tb->c_neg, > > + > RTE_BBDEV_TURBO_MAX_CODE_BLOCKS - 1); > > + if (tb->c < 1 || tb->c > > RTE_BBDEV_TURBO_MAX_CODE_BLOCKS) { > > + rte_bbdev_log(ERR, > > + "c (%u) is out of range 1 <= value <= > %u", > > + tb->c, > RTE_BBDEV_TURBO_MAX_CODE_BLOCKS); > > + return -1; > > + } > > + if (tb->cab > tb->c) { > > + rte_bbdev_log(ERR, > > + "cab (%u) is greater than c (%u)", > > + tb->cab, tb->c); > > + return -1; > > + } > > + if (check_bit(turbo_dec->op_flags, > RTE_BBDEV_TURBO_EQUALIZER) && > > + (tb->ea < RTE_BBDEV_TURBO_MIN_CB_SIZE > > + || (tb->ea % 2)) > > + && tb->cab > 0) { > > + rte_bbdev_log(ERR, > > + "ea (%u) is less than %u or it is not > even", > > + tb->ea, > RTE_BBDEV_TURBO_MIN_CB_SIZE); > > + return -1; > > + } > > + if (check_bit(turbo_dec->op_flags, > RTE_BBDEV_TURBO_EQUALIZER) && > > + (tb->eb < RTE_BBDEV_TURBO_MIN_CB_SIZE > > + || (tb->eb % 2)) > > + && tb->c > tb->cab) { > > + rte_bbdev_log(ERR, > > + "eb (%u) is less than %u or it is not > even", > > + tb->eb, > RTE_BBDEV_TURBO_MIN_CB_SIZE); > > + } > > + } else { > > + cb = &turbo_dec->cb_params; > > + if (cb->k < RTE_BBDEV_TURBO_MIN_CB_SIZE > > + || cb->k > > RTE_BBDEV_TURBO_MAX_CB_SIZE) { > > + rte_bbdev_log(ERR, > > + "k (%u) is out of range %u <= value <= > %u", > > + cb->k, > RTE_BBDEV_TURBO_MIN_CB_SIZE, > > + RTE_BBDEV_TURBO_MAX_CB_SIZE); > > + return -1; > > + } > > + if (check_bit(turbo_dec->op_flags, > RTE_BBDEV_TURBO_EQUALIZER) && > > + (cb->e < RTE_BBDEV_TURBO_MIN_CB_SIZE > || > > + (cb->e % 2))) { > > + rte_bbdev_log(ERR, > > + "e (%u) is less than %u or it is not > even", > > + cb->e, > RTE_BBDEV_TURBO_MIN_CB_SIZE); > > + return -1; > > + } > > + } > > + > > + return 0; > > +} > > +#endif > > + > > /** Enqueue one decode operations for ACC100 device in CB mode */ > > static inline int enqueue_dec_one_op_cb(struct acc100_queue *q, > > struct rte_bbdev_dec_op *op, @@ -2203,6 +2596,14 @@ > > struct rte_mbuf *input, *h_output_head, *h_output, > > *s_output_head, *s_output; > > > > +#ifdef RTE_LIBRTE_BBDEV_DEBUG > > + /* Validate op structure */ > > + if (validate_dec_op(op) == -1) { > > + rte_bbdev_log(ERR, "Turbo decoder validation failed"); > > + return -EINVAL; > > + } > > +#endif > > + > > uint16_t desc_idx = ((q->sw_ring_head + total_enqueued_cbs) > > & q->sw_ring_wrap_mask); > > desc = q->ring_addr + desc_idx; > > @@ -2426,6 +2827,13 @@ > > return ret; > > } > > > > +#ifdef RTE_LIBRTE_BBDEV_DEBUG > > + /* Validate op structure */ > > + if (validate_ldpc_dec_op(op) == -1) { > > + rte_bbdev_log(ERR, "LDPC decoder validation failed"); > > + return -EINVAL; > > + } > > +#endif > > union acc100_dma_desc *desc; > > uint16_t desc_idx = ((q->sw_ring_head + total_enqueued_cbs) > > & q->sw_ring_wrap_mask); > > @@ -2521,6 +2929,14 @@ > > struct rte_mbuf *input, *h_output_head, *h_output; > > uint16_t current_enqueued_cbs = 0; > > > > +#ifdef RTE_LIBRTE_BBDEV_DEBUG > > + /* Validate op structure */ > > + if (validate_ldpc_dec_op(op) == -1) { > > + rte_bbdev_log(ERR, "LDPC decoder validation failed"); > > + return -EINVAL; > > + } > > +#endif > > + > > uint16_t desc_idx = ((q->sw_ring_head + total_enqueued_cbs) > > & q->sw_ring_wrap_mask); > > desc = q->ring_addr + desc_idx; > > @@ -2611,6 +3027,14 @@ > > *s_output_head, *s_output; > > uint16_t current_enqueued_cbs = 0; > > > > +#ifdef RTE_LIBRTE_BBDEV_DEBUG > > + /* Validate op structure */ > > + if (validate_dec_op(op) == -1) { > > + rte_bbdev_log(ERR, "Turbo decoder validation failed"); > > + return -EINVAL; > > + } > > +#endif > > + > > uint16_t desc_idx = ((q->sw_ring_head + total_enqueued_cbs) > > & q->sw_ring_wrap_mask); > > desc = q->ring_addr + desc_idx;