On 9/8/2020 9:36 AM, Sarosh Arif wrote: > delay_us_sleep_autotest is failing on this patch. To replicate it, I > ran the same test on my system and it did not fail. Can this test be > re-run?
cc'ed lab people.
I clicked the 'rebuild' button for the test, but I can't see if it queued or
not...
>
> On Fri, Sep 4, 2020 at 11:23 AM Sarosh Arif <sarosh.a...@emumba.com> wrote:
>>
>> diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
>> index 30bee3324..8824ad174 100644
>> --- a/app/test-pmd/config.c
>> +++ b/app/test-pmd/config.c
>> @@ -518,6 +518,7 @@ device_infos_display(const char *identifier)
>> struct rte_device *dev;
>> struct rte_devargs da;
>> portid_t port_id;
>> + struct rte_eth_dev_info dev_info;
>> char devstr[128];
>>
>> memset(&da, 0, sizeof(da));
>> @@ -569,6 +570,90 @@ device_infos_display(const char *identifier)
>> &mac_addr);
>> rte_eth_dev_get_name_by_port(port_id, name);
>> printf("\n\tDevice name: %s", name);
>> + rte_eth_dev_info_get(port_id, &dev_info);
>> + switch (dev_info.speed_capa) {
>> + case ETH_LINK_SPEED_AUTONEG:
>> + printf("\n\tDevice speed capability:
>> %s",
>> + "Autonegotiate (all
>> speeds)");
>> + break;
>> + case ETH_LINK_SPEED_FIXED:
>> + printf("\n\tDevice speed capability:
>> %s",
>> + "Disable
>> autonegotiate (fixed speed)");
>> + break;
>> + case ETH_LINK_SPEED_10M_HD ...
>> + ETH_LINK_SPEED_10M-1:
>> + printf("\n\tDevice speed capability:
>> %s",
>> + "10 Mbps
>> half-duplex");
>> + break;
>> + case ETH_LINK_SPEED_10M ...
>> + ETH_LINK_SPEED_100M_HD-1:
>> + printf("\n\tDevice speed capability:
>> %s",
>> + "10 Mbps
>> full-duplex");
>> + break;
>> + case ETH_LINK_SPEED_100M_HD ...
>> + ETH_LINK_SPEED_100M-1:
>> + printf("\n\tDevice speed capability:
>> %s",
>> + "100 Mbps
>> half-duplex");
>> + break;
>> + case ETH_LINK_SPEED_100M ...
>> + ETH_LINK_SPEED_1G-1:
>> + printf("\n\tDevice speed capability:
>> %s",
>> + "100 Mbps
>> full-duplex");
>> + break;
>> + case ETH_LINK_SPEED_1G ...
>> + ETH_LINK_SPEED_2_5G-1:
>> + printf("\n\tDevice speed capability:
>> %s",
>> + "1 Gbps");
>> + break;
>> + case ETH_LINK_SPEED_2_5G ...
>> + ETH_LINK_SPEED_5G-1:
>> + printf("\n\tDevice speed capability:
>> %s",
>> + "2.5 Gbps");
>> + break;
>> + case ETH_LINK_SPEED_5G ...
>> + ETH_LINK_SPEED_10G-1:
>> + printf("\n\tDevice speed capability:
>> %s",
>> + "5 Gbps");
>> + break;
>> + case ETH_LINK_SPEED_10G ...
>> + ETH_LINK_SPEED_20G-1:
>> + printf("\n\tDevice speed capability:
>> %s",
>> + "10 Gbps");
>> + break;
>> + case ETH_LINK_SPEED_20G ...
>> + ETH_LINK_SPEED_25G-1:
>> + printf("\n\tDevice speed capability:
>> %s",
>> + "20 Gbps");
>> + break;
>> + case ETH_LINK_SPEED_25G ...
>> + ETH_LINK_SPEED_50G-1:
>> + printf("\n\tDevice speed capability:
>> %s",
>> + "25 Gbps");
>> + break;
>> + case ETH_LINK_SPEED_50G ...
>> + ETH_LINK_SPEED_56G-1:
>> + printf("\n\tDevice speed capability:
>> %s",
>> + "50 Gbps");
>> + break;
>> + case ETH_LINK_SPEED_56G ...
>> + ETH_LINK_SPEED_100G-1:
>> + printf("\n\tDevice speed capability:
>> %s",
>> + "56 Gbps");
>> + break;
>> + case ETH_LINK_SPEED_100G ...
>> + ETH_LINK_SPEED_200G-1:
>> + printf("\n\tDevice speed capability:
>> %s",
>> + "100 Gbps");
>> + break;
>> + case ETH_LINK_SPEED_200G:
>> + printf("\n\tDevice speed capability:
>> %s",
>> + "200 Gbps");
>> + break;
>> + default:
>> + printf("\n\tDevice speed capability:
>> %s",
>> + "not available");
>> + break;
>> + }
>> printf("\n");
>> }
>> }
>> --
>> 2.25.1
>>
