delay_us_sleep_autotest is failing on this patch. To replicate it, I ran the same test on my system and it did not fail. Can this test be re-run?
On Fri, Sep 4, 2020 at 11:23 AM Sarosh Arif <sarosh.a...@emumba.com> wrote:
>
> diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
> index 30bee3324..8824ad174 100644
> --- a/app/test-pmd/config.c
> +++ b/app/test-pmd/config.c
> @@ -518,6 +518,7 @@ device_infos_display(const char *identifier)
> struct rte_device *dev;
> struct rte_devargs da;
> portid_t port_id;
> + struct rte_eth_dev_info dev_info;
> char devstr[128];
>
> memset(&da, 0, sizeof(da));
> @@ -569,6 +570,90 @@ device_infos_display(const char *identifier)
> &mac_addr);
> rte_eth_dev_get_name_by_port(port_id, name);
> printf("\n\tDevice name: %s", name);
> + rte_eth_dev_info_get(port_id, &dev_info);
> + switch (dev_info.speed_capa) {
> + case ETH_LINK_SPEED_AUTONEG:
> + printf("\n\tDevice speed capability:
> %s",
> + "Autonegotiate (all
> speeds)");
> + break;
> + case ETH_LINK_SPEED_FIXED:
> + printf("\n\tDevice speed capability:
> %s",
> + "Disable
> autonegotiate (fixed speed)");
> + break;
> + case ETH_LINK_SPEED_10M_HD ...
> + ETH_LINK_SPEED_10M-1:
> + printf("\n\tDevice speed capability:
> %s",
> + "10 Mbps
> half-duplex");
> + break;
> + case ETH_LINK_SPEED_10M ...
> + ETH_LINK_SPEED_100M_HD-1:
> + printf("\n\tDevice speed capability:
> %s",
> + "10 Mbps
> full-duplex");
> + break;
> + case ETH_LINK_SPEED_100M_HD ...
> + ETH_LINK_SPEED_100M-1:
> + printf("\n\tDevice speed capability:
> %s",
> + "100 Mbps
> half-duplex");
> + break;
> + case ETH_LINK_SPEED_100M ...
> + ETH_LINK_SPEED_1G-1:
> + printf("\n\tDevice speed capability:
> %s",
> + "100 Mbps
> full-duplex");
> + break;
> + case ETH_LINK_SPEED_1G ...
> + ETH_LINK_SPEED_2_5G-1:
> + printf("\n\tDevice speed capability:
> %s",
> + "1 Gbps");
> + break;
> + case ETH_LINK_SPEED_2_5G ...
> + ETH_LINK_SPEED_5G-1:
> + printf("\n\tDevice speed capability:
> %s",
> + "2.5 Gbps");
> + break;
> + case ETH_LINK_SPEED_5G ...
> + ETH_LINK_SPEED_10G-1:
> + printf("\n\tDevice speed capability:
> %s",
> + "5 Gbps");
> + break;
> + case ETH_LINK_SPEED_10G ...
> + ETH_LINK_SPEED_20G-1:
> + printf("\n\tDevice speed capability:
> %s",
> + "10 Gbps");
> + break;
> + case ETH_LINK_SPEED_20G ...
> + ETH_LINK_SPEED_25G-1:
> + printf("\n\tDevice speed capability:
> %s",
> + "20 Gbps");
> + break;
> + case ETH_LINK_SPEED_25G ...
> + ETH_LINK_SPEED_50G-1:
> + printf("\n\tDevice speed capability:
> %s",
> + "25 Gbps");
> + break;
> + case ETH_LINK_SPEED_50G ...
> + ETH_LINK_SPEED_56G-1:
> + printf("\n\tDevice speed capability:
> %s",
> + "50 Gbps");
> + break;
> + case ETH_LINK_SPEED_56G ...
> + ETH_LINK_SPEED_100G-1:
> + printf("\n\tDevice speed capability:
> %s",
> + "56 Gbps");
> + break;
> + case ETH_LINK_SPEED_100G ...
> + ETH_LINK_SPEED_200G-1:
> + printf("\n\tDevice speed capability:
> %s",
> + "100 Gbps");
> + break;
> + case ETH_LINK_SPEED_200G:
> + printf("\n\tDevice speed capability:
> %s",
> + "200 Gbps");
> + break;
> + default:
> + printf("\n\tDevice speed capability:
> %s",
> + "not available");
> + break;
> + }
> printf("\n");
> }
> }
> --
> 2.25.1
>
