> -----Original Message----- > From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Jingjing Wu > Sent: Thursday, January 22, 2015 1:09 AM > To: dev at dpdk.org > Subject: [dpdk-dev] [PATCH] doc: commands changed in testpmd_funcs for > ethertype filter > > new commands for ethertype filter > - ethertype_filter (port_id) (add|del) (mac_addr|mac_ignr) > (mac_address) ethertype (ether_type) (drop|fwd) queue (queue_id) > > Signed-off-by: Jingjing Wu <jingjing.wu at intel.com> > --- > doc/guides/testpmd_app_ug/testpmd_funcs.rst | 51 > +++++++---------------------- > 1 file changed, 12 insertions(+), 39 deletions(-) > > diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst > b/doc/guides/testpmd_app_ug/testpmd_funcs.rst > index be935c2..218835a 100644 > --- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst > +++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst > @@ -1392,61 +1392,34 @@ Filter Functions > > This section details the available filter functions that are available. > > -add_ethertype_filter > +ethertype_filter > ~~~~~~~~~~~~~~~~~~~~ > > -Add a L2 Ethertype filter, which identify packets by their L2 Ethertype > mainly assign them to a receive > queue. > +Add or delete a L2 Ethertype filter, which identify packets by their L2 > Ethertype mainly assign them to > a receive queue. > > -add_ethertype_filter (port_id) ethertype (eth_value) priority > (enable|disable) (pri_value) queue > (queue_id) index (idx) > +ethertype_filter (port_id) (add|del) (mac_addr|mac_ignr) (mac_address) > ethertype (ether_type) > (drop|fwd) queue (queue_id) > > The available information parameters are: > > * port_id: the port which the Ethertype filter assigned on. > > -* eth_value: the EtherType value want to match, > - for example 0x0806 for ARP packet. 0x0800 (IPv4) and 0x86DD (IPv6) are > invalid. > - > -* enable: user priority participates in the match. > - > -* disable: user priority doesn't participate in the match. > - > -* pri_value: user priority value that want to match. > - > -* queue_id : The receive queue associated with this EtherType filter > +* mac_addr: compare destination mac address. > > -* index: the index of this EtherType filter > +* mac_ignr: ignore destination mac address match. > > -Example: > - > -.. code-block:: console > +* mac_address: destination mac address to match. > > - testpmd> add_ethertype_filter 0 ethertype 0x0806 priority disable 0 > queue 3 index 0 > - Assign ARP packet to receive queue 3 > - > -remove_ethertype_filter > -~~~~~~~~~~~~~~~~~~~~~~~ > - > -Remove a L2 Ethertype filter > - > -remove_ethertype_filter (port_id) index (idx) > - > -get_ethertype_filter > -~~~~~~~~~~~~~~~~~~~~ > - > -Get and display a L2 Ethertype filter > +* ether_type: the EtherType value want to match, > + for example 0x0806 for ARP packet. 0x0800 (IPv4) and 0x86DD (IPv6) are > invalid. > > -get_ethertype_filter (port_id) index (idx) > +* queue_id : The receive queue associated with this EtherType filter. It > is meaningless when > deleting or dropping. > > -Example: > +Example, to add/remove an ethertype filter rule: > > .. code-block:: console > > - testpmd> get_ethertype_filter 0 index 0 > - > - filter[0]: > - ethertype: 0x0806 > - priority: disable, 0 > - queue: 3 > + testpmd> ethertype_filter 0 add mac_ignr ethertype 0x0806 fwd queue 3 > + testpmd> ethertype_filter 0 del mac_ignr ethertype 0x0806 fwd queue 3
Hi Jingjing, There is a duplicate line here. I have applied the patch and checked the HTML output (applies and builds cleanly). Regards, Bernard > > add_2tuple_filter > ~~~~~~~~~~~~~~~~~ > -- > 1.9.3
