new commands for ethertype filter
- ethertype_filter (port_id) (add|del) (mac_addr|mac_ignr)
(mac_address) ethertype (ether_type) (drop|fwd) queue (queue_id)
Signed-off-by: Jingjing Wu <jingjing.wu at intel.com>
---
doc/guides/testpmd_app_ug/testpmd_funcs.rst | 46 +++++++----------------------
1 file changed, 11 insertions(+), 35 deletions(-)
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index be935c2..61a7f6d 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -1397,56 +1397,32 @@ add_ethertype_filter
Add a L2 Ethertype filter, which identify packets by their L2 Ethertype mainly
assign them to a receive queue.
-add_ethertype_filter (port_id) ethertype (eth_value) priority (enable|disable)
(pri_value) queue (queue_id) index (idx)
+ethertype_filter (port_id) (add|del) (mac_addr|mac_ignr) (mac_address)
ethertype (ether_type) (drop|fwd) queue (queue_id)
The available information parameters are:
* port_id: the port which the Ethertype filter assigned on.
-* eth_value: the EtherType value want to match,
- for example 0x0806 for ARP packet. 0x0800 (IPv4) and 0x86DD (IPv6) are
invalid.
-
-* enable: user priority participates in the match.
-
-* disable: user priority doesn't participate in the match.
-
-* pri_value: user priority value that want to match.
-
-* queue_id : The receive queue associated with this EtherType filter
+* mac_addr: need compare destination mac address.
-* index: the index of this EtherType filter
-
-Example:
-
-.. code-block:: console
+* mac_ignr: ignore destination mac address match.
- testpmd> add_ethertype_filter 0 ethertype 0x0806 priority disable 0 queue
3 index 0
- Assign ARP packet to receive queue 3
+* mac_address: destination mac address need to match.
-remove_ethertype_filter
-~~~~~~~~~~~~~~~~~~~~~~~
-
-Remove a L2 Ethertype filter
-
-remove_ethertype_filter (port_id) index (idx)
-
-get_ethertype_filter
-~~~~~~~~~~~~~~~~~~~~
-
-Get and display a L2 Ethertype filter
+* ether_type: the EtherType value want to match,
+ for example 0x0806 for ARP packet. 0x0800 (IPv4) and 0x86DD (IPv6) are
invalid.
-get_ethertype_filter (port_id) index (idx)
+* queue_id : The receive queue associated with this EtherType filter. It is
meaningless when deleting or dropping.
Example:
.. code-block:: console
- testpmd> get_ethertype_filter 0 index 0
+ testpmd> ethertype_filter 0 add mac_ignr ethertype 0x0806 fwd queue 3
+ add a rule to assign ARP packet to receive queue 3
- filter[0]:
- ethertype: 0x0806
- priority: disable, 0
- queue: 3
+ testpmd> ethertype_filter 0 del mac_ignr ethertype 0x0806 fwd queue 3
+ delete the rule to assign ARP packet to receive queue 3
add_2tuple_filter
~~~~~~~~~~~~~~~~~
--
1.9.3
