hi, jiang mao
On 7/9/2020 3:50 AM, Jiang Mao wrote:
The value of vsi->nb_msix shouldn`t be zero, otherwise, all of
interrupts will be bind to vector 0.
Fixes: 4861cde461 (i40e: new poll mode driver)
Cc: sta...@dpdk.org
Blank line is need before Signed-off. And please remember --reply-to
when you send new version patch to trace the comments.
Signed-off-by: Jiang Mao <maox.ji...@intel.com>
---
drivers/net/i40e/i40e_ethdev.c | 31 +++++++++++++++++++++++--------
drivers/net/i40e/i40e_ethdev.h | 2 +-
2 files changed, 24 insertions(+), 9 deletions(-)
diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
index 777e149..16fcb8d 100644
--- a/drivers/net/i40e/i40e_ethdev.c
+++ b/drivers/net/i40e/i40e_ethdev.c
@@ -2001,7 +2001,7 @@ void i40e_flex_payload_reg_set_default(struct i40e_hw *hw)
I40E_WRITE_FLUSH(hw);
}
-void
+int
i40e_vsi_queues_bind_intr(struct i40e_vsi *vsi, uint16_t itr_idx)
{
struct rte_eth_dev *dev = vsi->adapter->eth_dev;
@@ -2021,10 +2021,14 @@ void i40e_flex_payload_reg_set_default(struct i40e_hw
*hw)
/* VF bind interrupt */
if (vsi->type == I40E_VSI_SRIOV) {
+ if (vsi->nb_msix == 0) {
+ PMD_DRV_LOG(ERR, "No msix resource");
+ return -EINVAL;
+ }
__vsi_queues_bind_intr(vsi, msix_vect,
vsi->base_queue, vsi->nb_qps,
itr_idx);
- return;
+ return 0;
}
/* PF & VMDq bind interrupt */
@@ -2041,7 +2045,10 @@ void i40e_flex_payload_reg_set_default(struct i40e_hw
*hw)
}
for (i = 0; i < vsi->nb_used_qps; i++) {
- if (nb_msix <= 1) {
+ if (vsi->nb_msix == 0) {
+ PMD_DRV_LOG(ERR, "No msix resource");
+ return -EINVAL;
+ } else if (nb_msix <= 1) {
if (!rte_intr_allow_others(intr_handle))
/* allow to share MISC_VEC_ID */
msix_vect = I40E_MISC_VEC_ID;
@@ -2066,6 +2073,8 @@ void i40e_flex_payload_reg_set_default(struct i40e_hw *hw)
msix_vect++;
nb_msix--;
}
+
+ return 0;
}
static void
@@ -2306,21 +2315,27 @@ void i40e_flex_payload_reg_set_default(struct i40e_hw
*hw)
/* Map queues with MSIX interrupt */
main_vsi->nb_used_qps = dev->data->nb_rx_queues -
pf->nb_cfg_vmdq_vsi * RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM;
- i40e_vsi_queues_bind_intr(main_vsi, I40E_ITR_INDEX_DEFAULT);
+ ret = i40e_vsi_queues_bind_intr(main_vsi, I40E_ITR_INDEX_DEFAULT);
+ if (ret < 0)
Better to add some print log out of the calling if it is need. Below is
the same.
+ return ret;
i40e_vsi_enable_queues_intr(main_vsi);
/* Map VMDQ VSI queues with MSIX interrupt */
for (i = 0; i < pf->nb_cfg_vmdq_vsi; i++) {
pf->vmdq[i].vsi->nb_used_qps = RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM;
- i40e_vsi_queues_bind_intr(pf->vmdq[i].vsi,
- I40E_ITR_INDEX_DEFAULT);
+ ret = i40e_vsi_queues_bind_intr(pf->vmdq[i].vsi,
+ I40E_ITR_INDEX_DEFAULT);
+ if (ret < 0)
+ return ret;
i40e_vsi_enable_queues_intr(pf->vmdq[i].vsi);
}
/* enable FDIR MSIX interrupt */
if (pf->fdir.fdir_vsi) {
- i40e_vsi_queues_bind_intr(pf->fdir.fdir_vsi,
- I40E_ITR_INDEX_NONE);
+ ret = i40e_vsi_queues_bind_intr(pf->fdir.fdir_vsi,
+ I40E_ITR_INDEX_NONE);
+ if (ret < 0)
+ return ret;
i40e_vsi_enable_queues_intr(pf->fdir.fdir_vsi);
}
diff --git a/drivers/net/i40e/i40e_ethdev.h b/drivers/net/i40e/i40e_ethdev.h
index e5d0ce5..33fbe77 100644
--- a/drivers/net/i40e/i40e_ethdev.h
+++ b/drivers/net/i40e/i40e_ethdev.h
@@ -1248,7 +1248,7 @@ struct i40e_vsi *i40e_vsi_setup(struct i40e_pf *pf,
void i40e_pf_disable_irq0(struct i40e_hw *hw);
void i40e_pf_enable_irq0(struct i40e_hw *hw);
int i40e_dev_link_update(struct rte_eth_dev *dev, int wait_to_complete);
-void i40e_vsi_queues_bind_intr(struct i40e_vsi *vsi, uint16_t itr_idx);
+int i40e_vsi_queues_bind_intr(struct i40e_vsi *vsi, uint16_t itr_idx);
void i40e_vsi_queues_unbind_intr(struct i40e_vsi *vsi);
int i40e_vsi_vlan_pvid_set(struct i40e_vsi *vsi,
struct i40e_vsi_vlan_pvid_info *info);