Thanks Jia. Comments as below.

> -----Original Message-----
> From: Guo, Jia
> Sent: Tuesday, July 21, 2020 11:58 AM
> To: Jiang, MaoX <maox.ji...@intel.com>; Ye, Xiaolong
> <xiaolong...@intel.com>
> Cc: dev@dpdk.org; sta...@dpdk.org
> Subject: Re: [dpdk-dev] [PATCH 1/2] net/i40e: fix binding interrupt without
> msix vectors
> 
> hi, jiang mao
> 
> On 7/9/2020 3:50 AM, Jiang Mao wrote:
> > The value of vsi->nb_msix shouldn`t be zero, otherwise, all of
> > interrupts will be bind to vector 0.
> >
> > Fixes: 4861cde461 (i40e: new poll mode driver)
> > Cc: sta...@dpdk.org
> 
> 
> Blank line is need before Signed-off. And please remember --reply-to when
> you send new version patch to trace the comments.
> 
> 
> > Signed-off-by: Jiang Mao <maox.ji...@intel.com>
> > ---
> >   drivers/net/i40e/i40e_ethdev.c | 31 +++++++++++++++++++++++--------
> >   drivers/net/i40e/i40e_ethdev.h |  2 +-
> >   2 files changed, 24 insertions(+), 9 deletions(-)
> >
> > diff --git a/drivers/net/i40e/i40e_ethdev.c
> b/drivers/net/i40e/i40e_ethdev.c
> > index 777e149..16fcb8d 100644
> > --- a/drivers/net/i40e/i40e_ethdev.c
> > +++ b/drivers/net/i40e/i40e_ethdev.c
> > @@ -2001,7 +2001,7 @@ void i40e_flex_payload_reg_set_default(struct
> i40e_hw *hw)
> >     I40E_WRITE_FLUSH(hw);
> >   }
> >
> > -void
> > +int
> >   i40e_vsi_queues_bind_intr(struct i40e_vsi *vsi, uint16_t itr_idx)
> >   {
> >     struct rte_eth_dev *dev = vsi->adapter->eth_dev;
> > @@ -2021,10 +2021,14 @@ void i40e_flex_payload_reg_set_default(struct
> i40e_hw *hw)
> >
> >     /* VF bind interrupt */
> >     if (vsi->type == I40E_VSI_SRIOV) {
> > +           if (vsi->nb_msix == 0) {
> > +                   PMD_DRV_LOG(ERR, "No msix resource");
> > +                   return -EINVAL;
> > +           }
> >             __vsi_queues_bind_intr(vsi, msix_vect,
> >                                    vsi->base_queue, vsi->nb_qps,
> >                                    itr_idx);
> > -           return;
> > +           return 0;
> >     }
> >
> >     /* PF & VMDq bind interrupt */
> > @@ -2041,7 +2045,10 @@ void i40e_flex_payload_reg_set_default(struct
> i40e_hw *hw)
> >     }
> >
> >     for (i = 0; i < vsi->nb_used_qps; i++) {
> > -           if (nb_msix <= 1) {
> > +           if (vsi->nb_msix == 0) {
> > +                   PMD_DRV_LOG(ERR, "No msix resource");
> > +                   return -EINVAL;
> > +           } else if (nb_msix <= 1) {
> >                     if (!rte_intr_allow_others(intr_handle))
> >                             /* allow to share MISC_VEC_ID */
> >                             msix_vect = I40E_MISC_VEC_ID;
> > @@ -2066,6 +2073,8 @@ void i40e_flex_payload_reg_set_default(struct
> i40e_hw *hw)
> >             msix_vect++;
> >             nb_msix--;
> >     }
> > +
> > +   return 0;
> >   }
> >
> >   static void
> > @@ -2306,21 +2315,27 @@ void i40e_flex_payload_reg_set_default(struct
> i40e_hw *hw)
> >     /* Map queues with MSIX interrupt */
> >     main_vsi->nb_used_qps = dev->data->nb_rx_queues -
> >             pf->nb_cfg_vmdq_vsi *
> RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM;
> > -   i40e_vsi_queues_bind_intr(main_vsi, I40E_ITR_INDEX_DEFAULT);
> > +   ret = i40e_vsi_queues_bind_intr(main_vsi,
> I40E_ITR_INDEX_DEFAULT);
> > +   if (ret < 0)
> 
> 
> Better to add some print log out of the calling if it is need. Below is
> the same.

At i40e_vsi_queues_bind_intr(), I have add a print log, I think it`s enough, 
otherwise it will add too many print log in code.

> 
> 
> > +           return ret;
> >     i40e_vsi_enable_queues_intr(main_vsi);
> >
> >     /* Map VMDQ VSI queues with MSIX interrupt */
> >     for (i = 0; i < pf->nb_cfg_vmdq_vsi; i++) {
> >             pf->vmdq[i].vsi->nb_used_qps =
> RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM;
> > -           i40e_vsi_queues_bind_intr(pf->vmdq[i].vsi,
> > -                                     I40E_ITR_INDEX_DEFAULT);
> > +           ret = i40e_vsi_queues_bind_intr(pf->vmdq[i].vsi,
> > +                                           I40E_ITR_INDEX_DEFAULT);
> > +           if (ret < 0)
> > +                   return ret;
> >             i40e_vsi_enable_queues_intr(pf->vmdq[i].vsi);
> >     }
> >
> >     /* enable FDIR MSIX interrupt */
> >     if (pf->fdir.fdir_vsi) {
> > -           i40e_vsi_queues_bind_intr(pf->fdir.fdir_vsi,
> > -                                     I40E_ITR_INDEX_NONE);
> > +           ret = i40e_vsi_queues_bind_intr(pf->fdir.fdir_vsi,
> > +                                           I40E_ITR_INDEX_NONE);
> > +           if (ret < 0)
> > +                   return ret;
> >             i40e_vsi_enable_queues_intr(pf->fdir.fdir_vsi);
> >     }
> >
> > diff --git a/drivers/net/i40e/i40e_ethdev.h
> b/drivers/net/i40e/i40e_ethdev.h
> > index e5d0ce5..33fbe77 100644
> > --- a/drivers/net/i40e/i40e_ethdev.h
> > +++ b/drivers/net/i40e/i40e_ethdev.h
> > @@ -1248,7 +1248,7 @@ struct i40e_vsi *i40e_vsi_setup(struct i40e_pf *pf,
> >   void i40e_pf_disable_irq0(struct i40e_hw *hw);
> >   void i40e_pf_enable_irq0(struct i40e_hw *hw);
> >   int i40e_dev_link_update(struct rte_eth_dev *dev, int
> wait_to_complete);
> > -void i40e_vsi_queues_bind_intr(struct i40e_vsi *vsi, uint16_t itr_idx);
> > +int i40e_vsi_queues_bind_intr(struct i40e_vsi *vsi, uint16_t itr_idx);
> >   void i40e_vsi_queues_unbind_intr(struct i40e_vsi *vsi);
> >   int i40e_vsi_vlan_pvid_set(struct i40e_vsi *vsi,
> >                        struct i40e_vsi_vlan_pvid_info *info);

Reply via email to