Thanks Qiming,
I have updated it and resubmitted the patch.
> -----Original Message-----
> From: Yang, Qiming <qiming.y...@intel.com>
> Sent: Thursday, July 16, 2020 12:58 PM
> To: Zhang, AlvinX <alvinx.zh...@intel.com>; Guo, Jia <jia....@intel.com>
> Cc: Xing, Beilei <beilei.x...@intel.com>; dev@dpdk.org; Zhang, AlvinX
> <alvinx.zh...@intel.com>; sta...@dpdk.org
> Subject: RE: [dpdk-dev] [PATCH v5] net/i40e: fix modify the number of qps in
> VF
>
>
>
> > -----Original Message-----
> > From: dev <dev-boun...@dpdk.org> On Behalf Of alvinx.zh...@intel.com
> > Sent: Thursday, July 16, 2020 12:24
> > To: Guo, Jia <jia....@intel.com>
> > Cc: Xing, Beilei <beilei.x...@intel.com>; dev@dpdk.org; Zhang, AlvinX
> > <alvinx.zh...@intel.com>; sta...@dpdk.org
> > Subject: [dpdk-dev] [PATCH v5] net/i40e: fix modify the number of qps
> > in VF
>
> Fix and modify are all verbs, I think you want to fix the queue pair modify
> process.
>
> > From: Alvin Zhang <alvinx.zh...@intel.com>
> >
> > If a VF request PF to allocate more number of queue pairs, the PF will
> > free the queue pairs which have been allocated and reset the VF. So,
> > VF should stop to work until all the process is done. This patch
> > modify the process of the request queue pairs. To improve efficiency
> > and eliminate code redundancy, the promiscuous ops were also updated.
> >
> > Fixes: c48eb308ed13 ("net/i40e: support VF request more queues")
> > Cc: sta...@dpdk.org
> >
> > Signed-off-by: Alvin Zhang <alvinx.zh...@intel.com>
> > ---
> >
> > V2: Update git log and modify codes according to comments.
> > V3: All the code was refactored.
> > V4, V5: Modify codes according to comments.
> > ---
> > drivers/net/i40e/i40e_ethdev_vf.c | 104
> > ++++++++++++++++++++-----------
> > -------
> > 1 file changed, 54 insertions(+), 50 deletions(-)
> >
> > diff --git a/drivers/net/i40e/i40e_ethdev_vf.c
> > b/drivers/net/i40e/i40e_ethdev_vf.c
> > index eca716a..69cab8e 100644
> > --- a/drivers/net/i40e/i40e_ethdev_vf.c
> > +++ b/drivers/net/i40e/i40e_ethdev_vf.c
> > @@ -91,7 +91,8 @@ static int i40evf_vlan_filter_set(struct rte_eth_dev
> > *dev,
> > uint16_t vlan_id, int on);
> > static int i40evf_vlan_offload_set(struct rte_eth_dev *dev, int
> > mask); static void i40evf_dev_close(struct rte_eth_dev *dev); -static
> > int i40evf_dev_reset(struct rte_eth_dev *dev);
> > +static int i40evf_dev_reset(struct rte_eth_dev *dev); static int
> > +i40evf_check_vf_reset_done(struct rte_eth_dev *dev);
> > static int i40evf_dev_promiscuous_enable(struct rte_eth_dev *dev);
> > static int i40evf_dev_promiscuous_disable(struct rte_eth_dev *dev);
> > static int i40evf_dev_allmulticast_enable(struct rte_eth_dev *dev); @@
> > -519,10
> > +520,19 @@ struct rte_i40evf_xstats_name_off {
> >
> > err = i40evf_execute_vf_cmd(dev, &args);
> >
> > - if (err)
> > + if (err) {
> > PMD_DRV_LOG(ERR, "fail to execute command "
> > "CONFIG_PROMISCUOUS_MODE");
> > - return err;
> > +
> > + if (err == I40E_NOT_SUPPORTED)
> > + return -ENOTSUP;
> > +
> > + return -EAGAIN;
> > + }
> > +
> > + vf->promisc_unicast_enabled = enable_unicast;
> > + vf->promisc_multicast_enabled = enable_multicast;
> > + return 0;
> > }
> >
> > static int
> > @@ -1081,12 +1091,28 @@ static int i40evf_dev_xstats_get(struct
> > rte_eth_dev *dev,
> > args.out_size = I40E_AQ_BUF_SZ;
> >
> > rte_eal_alarm_cancel(i40evf_dev_alarm_handler, dev);
> > +
> > err = i40evf_execute_vf_cmd(dev, &args);
> > - if (err)
> > +
> > + rte_eal_alarm_set(I40EVF_ALARM_INTERVAL,
> > i40evf_dev_alarm_handler,
> > +dev);
> > +
> > + if (err != I40E_SUCCESS) {
> > PMD_DRV_LOG(ERR, "fail to execute command
> OP_REQUEST_QUEUES");
> > + return err;
> > + }
> > +
> > + /* The PF will issue a reset to the VF when change the number of
> > + * queues. The PF will set I40E_VFGEN_RSTAT to COMPLETE first,
> > then
> > + * wait 10ms and set it to ACTIVE. In this duration, vf may not catch
> > + * the moment that COMPLETE is set. So, for vf, we'll try to wait a
> > + * long time.
> > + */
> > + rte_delay_ms(100);
> > +
> > + err = i40evf_check_vf_reset_done(dev);
> > + if (err)
> > + PMD_DRV_LOG(ERR, "VF is still resetting");
> >
> > - rte_eal_alarm_set(I40EVF_ALARM_INTERVAL,
> > - i40evf_dev_alarm_handler, dev);
> > return err;
> > }
> >
> > @@ -1514,7 +1540,7 @@ static int i40evf_dev_xstats_get(struct
> > rte_eth_dev *dev,
> > hw->bus.device = pci_dev->addr.devid;
> > hw->bus.func = pci_dev->addr.function;
> > hw->hw_addr = (void *)pci_dev->mem_resource[0].addr;
> > - hw->adapter_stopped = 0;
> > + hw->adapter_stopped = 1;
> > hw->adapter_closed = 0;
> >
> > /* Pass the information to the rte_eth_dev_close() that it should
> > also @@ -1610,7 +1636,20 @@ static int eth_i40evf_pci_remove(struct
> > rte_pci_device *pci_dev)
> > ad->tx_vec_allowed = true;
> >
> > if (num_queue_pairs > vf->vsi_res->num_queue_pairs) {
> > - int ret = 0;
> > + struct i40e_hw *hw;
> > + int ret;
> > +
> > + if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
> > + PMD_DRV_LOG(ERR,
> > + "For secondary processes, change queue
> > pairs is not supported!");
> > + return -ENOTSUP;
> > + }
> > +
> > + hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
> > + if (!hw->adapter_stopped) {
> > + PMD_DRV_LOG(ERR, "Device must be stopped
> > first!");
> > + return -EBUSY;
> > + }
> >
> > PMD_DRV_LOG(INFO, "change queue pairs from %u to %u",
> > vf->vsi_res->num_queue_pairs,
> > num_queue_pairs); @@ -2182,68 +2221,32 @@ static int
> > eth_i40evf_pci_remove(struct rte_pci_device *pci_dev)
> > i40evf_dev_promiscuous_enable(struct rte_eth_dev *dev) {
> > struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data-
> > >dev_private);
> > - int ret;
> > -
> > - ret = i40evf_config_promisc(dev, 1, vf->promisc_multicast_enabled);
> > - if (ret == 0)
> > - vf->promisc_unicast_enabled = TRUE;
> > - else if (ret == I40E_NOT_SUPPORTED)
> > - ret = -ENOTSUP;
> > - else
> > - ret = -EAGAIN;
> >
> > - return ret;
> > + return i40evf_config_promisc(dev, true,
> > +vf->promisc_multicast_enabled);
> > }
> >
> > static int
> > i40evf_dev_promiscuous_disable(struct rte_eth_dev *dev) {
> > struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data-
> > >dev_private);
> > - int ret;
> > -
> > - ret = i40evf_config_promisc(dev, 0, vf->promisc_multicast_enabled);
> > - if (ret == 0)
> > - vf->promisc_unicast_enabled = FALSE;
> > - else if (ret == I40E_NOT_SUPPORTED)
> > - ret = -ENOTSUP;
> > - else
> > - ret = -EAGAIN;
> >
> > - return ret;
> > + return i40evf_config_promisc(dev, false,
> > +vf->promisc_multicast_enabled);
> > }
> >
> > static int
> > i40evf_dev_allmulticast_enable(struct rte_eth_dev *dev) {
> > struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data-
> > >dev_private);
> > - int ret;
> > -
> > - ret = i40evf_config_promisc(dev, vf->promisc_unicast_enabled, 1);
> > - if (ret == 0)
> > - vf->promisc_multicast_enabled = TRUE;
> > - else if (ret == I40E_NOT_SUPPORTED)
> > - ret = -ENOTSUP;
> > - else
> > - ret = -EAGAIN;
> >
> > - return ret;
> > + return i40evf_config_promisc(dev, vf->promisc_unicast_enabled,
> > true);
> > }
> >
> > static int
> > i40evf_dev_allmulticast_disable(struct rte_eth_dev *dev) {
> > struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data-
> > >dev_private);
> > - int ret;
> > -
> > - ret = i40evf_config_promisc(dev, vf->promisc_unicast_enabled, 0);
> > - if (ret == 0)
> > - vf->promisc_multicast_enabled = FALSE;
> > - else if (ret == I40E_NOT_SUPPORTED)
> > - ret = -ENOTSUP;
> > - else
> > - ret = -EAGAIN;
> >
> > - return ret;
> > + return i40evf_config_promisc(dev, vf->promisc_unicast_enabled,
> > false);
> > }
> >
> > static int
> > @@ -2365,8 +2368,9 @@ static int eth_i40evf_pci_remove(struct
> > rte_pci_device *pci_dev)
> > * it is a workaround solution when work with kernel driver
> > * and it is not the normal way
> > */
> > - i40evf_dev_promiscuous_disable(dev);
> > - i40evf_dev_allmulticast_disable(dev);
> > + if (vf->promisc_unicast_enabled || vf->promisc_multicast_enabled)
> > + i40evf_config_promisc(dev, false, false);
> > +
> > rte_eal_alarm_cancel(i40evf_dev_alarm_handler, dev);
> >
> > i40evf_reset_vf(dev);
> > --
> > 1.8.3.1
