> -----Original Message-----
> From: dev <dev-boun...@dpdk.org> On Behalf Of alvinx.zh...@intel.com
> Sent: Thursday, July 16, 2020 12:24
> To: Guo, Jia <jia....@intel.com>
> Cc: Xing, Beilei <beilei.x...@intel.com>; dev@dpdk.org; Zhang, AlvinX
> <alvinx.zh...@intel.com>; sta...@dpdk.org
> Subject: [dpdk-dev] [PATCH v5] net/i40e: fix modify the number of qps in VF

Fix and modify are all verbs, I think you want to fix the queue pair modify 
process.

> From: Alvin Zhang <alvinx.zh...@intel.com>
> 
> If a VF request PF to allocate more number of queue pairs, the PF will free
> the queue pairs which have been allocated and reset the VF. So, VF should
> stop to work until all the process is done. This patch modify the process of
> the request queue pairs. To improve efficiency and eliminate code
> redundancy, the promiscuous ops were also updated.
> 
> Fixes: c48eb308ed13 ("net/i40e: support VF request more queues")
> Cc: sta...@dpdk.org
> 
> Signed-off-by: Alvin Zhang <alvinx.zh...@intel.com>
> ---
> 
> V2: Update git log and modify codes according to comments.
> V3: All the code was refactored.
> V4, V5: Modify codes according to comments.
> ---
>  drivers/net/i40e/i40e_ethdev_vf.c | 104 ++++++++++++++++++++-----------
> -------
>  1 file changed, 54 insertions(+), 50 deletions(-)
> 
> diff --git a/drivers/net/i40e/i40e_ethdev_vf.c
> b/drivers/net/i40e/i40e_ethdev_vf.c
> index eca716a..69cab8e 100644
> --- a/drivers/net/i40e/i40e_ethdev_vf.c
> +++ b/drivers/net/i40e/i40e_ethdev_vf.c
> @@ -91,7 +91,8 @@ static int i40evf_vlan_filter_set(struct rte_eth_dev
> *dev,
>                                 uint16_t vlan_id, int on);
>  static int i40evf_vlan_offload_set(struct rte_eth_dev *dev, int mask);  
> static
> void i40evf_dev_close(struct rte_eth_dev *dev); -static int
> i40evf_dev_reset(struct rte_eth_dev *dev);
> +static int i40evf_dev_reset(struct rte_eth_dev *dev); static int
> +i40evf_check_vf_reset_done(struct rte_eth_dev *dev);
>  static int i40evf_dev_promiscuous_enable(struct rte_eth_dev *dev);  static
> int i40evf_dev_promiscuous_disable(struct rte_eth_dev *dev);  static int
> i40evf_dev_allmulticast_enable(struct rte_eth_dev *dev); @@ -519,10
> +520,19 @@ struct rte_i40evf_xstats_name_off {
> 
>       err = i40evf_execute_vf_cmd(dev, &args);
> 
> -     if (err)
> +     if (err) {
>               PMD_DRV_LOG(ERR, "fail to execute command "
>                           "CONFIG_PROMISCUOUS_MODE");
> -     return err;
> +
> +             if (err == I40E_NOT_SUPPORTED)
> +                     return -ENOTSUP;
> +
> +             return -EAGAIN;
> +     }
> +
> +     vf->promisc_unicast_enabled = enable_unicast;
> +     vf->promisc_multicast_enabled = enable_multicast;
> +     return 0;
>  }
> 
>  static int
> @@ -1081,12 +1091,28 @@ static int i40evf_dev_xstats_get(struct
> rte_eth_dev *dev,
>       args.out_size = I40E_AQ_BUF_SZ;
> 
>       rte_eal_alarm_cancel(i40evf_dev_alarm_handler, dev);
> +
>       err = i40evf_execute_vf_cmd(dev, &args);
> -     if (err)
> +
> +     rte_eal_alarm_set(I40EVF_ALARM_INTERVAL,
> i40evf_dev_alarm_handler,
> +dev);
> +
> +     if (err != I40E_SUCCESS) {
>               PMD_DRV_LOG(ERR, "fail to execute command
> OP_REQUEST_QUEUES");
> +             return err;
> +     }
> +
> +     /* The PF will issue a reset to the VF when change the number of
> +      * queues. The PF will set I40E_VFGEN_RSTAT to COMPLETE first,
> then
> +      * wait 10ms and set it to ACTIVE. In this duration, vf may not catch
> +      * the moment that COMPLETE is set. So, for vf, we'll try to wait a
> +      * long time.
> +      */
> +     rte_delay_ms(100);
> +
> +     err = i40evf_check_vf_reset_done(dev);
> +     if (err)
> +             PMD_DRV_LOG(ERR, "VF is still resetting");
> 
> -     rte_eal_alarm_set(I40EVF_ALARM_INTERVAL,
> -                       i40evf_dev_alarm_handler, dev);
>       return err;
>  }
> 
> @@ -1514,7 +1540,7 @@ static int i40evf_dev_xstats_get(struct rte_eth_dev
> *dev,
>       hw->bus.device = pci_dev->addr.devid;
>       hw->bus.func = pci_dev->addr.function;
>       hw->hw_addr = (void *)pci_dev->mem_resource[0].addr;
> -     hw->adapter_stopped = 0;
> +     hw->adapter_stopped = 1;
>       hw->adapter_closed = 0;
> 
>       /* Pass the information to the rte_eth_dev_close() that it should
> also @@ -1610,7 +1636,20 @@ static int eth_i40evf_pci_remove(struct
> rte_pci_device *pci_dev)
>       ad->tx_vec_allowed = true;
> 
>       if (num_queue_pairs > vf->vsi_res->num_queue_pairs) {
> -             int ret = 0;
> +             struct i40e_hw *hw;
> +             int ret;
> +
> +             if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
> +                     PMD_DRV_LOG(ERR,
> +                                 "For secondary processes, change queue
> pairs is not supported!");
> +                     return -ENOTSUP;
> +             }
> +
> +             hw  = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
> +             if (!hw->adapter_stopped) {
> +                     PMD_DRV_LOG(ERR, "Device must be stopped
> first!");
> +                     return -EBUSY;
> +             }
> 
>               PMD_DRV_LOG(INFO, "change queue pairs from %u to %u",
>                           vf->vsi_res->num_queue_pairs,
> num_queue_pairs); @@ -2182,68 +2221,32 @@ static int
> eth_i40evf_pci_remove(struct rte_pci_device *pci_dev)
> i40evf_dev_promiscuous_enable(struct rte_eth_dev *dev)  {
>       struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data-
> >dev_private);
> -     int ret;
> -
> -     ret = i40evf_config_promisc(dev, 1, vf->promisc_multicast_enabled);
> -     if (ret == 0)
> -             vf->promisc_unicast_enabled = TRUE;
> -     else if (ret == I40E_NOT_SUPPORTED)
> -             ret = -ENOTSUP;
> -     else
> -             ret = -EAGAIN;
> 
> -     return ret;
> +     return i40evf_config_promisc(dev, true,
> +vf->promisc_multicast_enabled);
>  }
> 
>  static int
>  i40evf_dev_promiscuous_disable(struct rte_eth_dev *dev)  {
>       struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data-
> >dev_private);
> -     int ret;
> -
> -     ret = i40evf_config_promisc(dev, 0, vf->promisc_multicast_enabled);
> -     if (ret == 0)
> -             vf->promisc_unicast_enabled = FALSE;
> -     else if (ret == I40E_NOT_SUPPORTED)
> -             ret = -ENOTSUP;
> -     else
> -             ret = -EAGAIN;
> 
> -     return ret;
> +     return i40evf_config_promisc(dev, false,
> +vf->promisc_multicast_enabled);
>  }
> 
>  static int
>  i40evf_dev_allmulticast_enable(struct rte_eth_dev *dev)  {
>       struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data-
> >dev_private);
> -     int ret;
> -
> -     ret = i40evf_config_promisc(dev, vf->promisc_unicast_enabled, 1);
> -     if (ret == 0)
> -             vf->promisc_multicast_enabled = TRUE;
> -     else if (ret == I40E_NOT_SUPPORTED)
> -             ret = -ENOTSUP;
> -     else
> -             ret = -EAGAIN;
> 
> -     return ret;
> +     return i40evf_config_promisc(dev, vf->promisc_unicast_enabled,
> true);
>  }
> 
>  static int
>  i40evf_dev_allmulticast_disable(struct rte_eth_dev *dev)  {
>       struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data-
> >dev_private);
> -     int ret;
> -
> -     ret = i40evf_config_promisc(dev, vf->promisc_unicast_enabled, 0);
> -     if (ret == 0)
> -             vf->promisc_multicast_enabled = FALSE;
> -     else if (ret == I40E_NOT_SUPPORTED)
> -             ret = -ENOTSUP;
> -     else
> -             ret = -EAGAIN;
> 
> -     return ret;
> +     return i40evf_config_promisc(dev, vf->promisc_unicast_enabled,
> false);
>  }
> 
>  static int
> @@ -2365,8 +2368,9 @@ static int eth_i40evf_pci_remove(struct
> rte_pci_device *pci_dev)
>        * it is a workaround solution when work with kernel driver
>        * and it is not the normal way
>        */
> -     i40evf_dev_promiscuous_disable(dev);
> -     i40evf_dev_allmulticast_disable(dev);
> +     if (vf->promisc_unicast_enabled || vf->promisc_multicast_enabled)
> +             i40evf_config_promisc(dev, false, false);
> +
>       rte_eal_alarm_cancel(i40evf_dev_alarm_handler, dev);
> 
>       i40evf_reset_vf(dev);
> --
> 1.8.3.1

Reply via email to