Hi all, I just wanted to follow up on the status of the patch. I was wondering if there were plans to merge the patch before testpmd was updated with the speed_capa change.
Thanks, Dan On Tue, Jun 30, 2020 at 3:59 PM Daniel Kirichok <dkiric...@iol.unh.edu> wrote: > Inline > > On Tue, Jun 30, 2020 at 3:27 AM Morten Brørup <m...@smartsharesystems.com> > wrote: > >> > From: dev [mailto:dev-boun...@dpdk.org] On Behalf Of Ivan Dyukov >> > Sent: Tuesday, June 30, 2020 9:03 AM >> >> [...] >> >> > > +Test Case : Speed Capabilities Test >> > > +=================================== >> > > + >> > > +1. Use testpmd to retrieve the speed information that the interface >> > is linked at:: >> > > + >> > > + testpmd> show port info <PORT_ID> >> > >> > I'm afraid that testpmd don't show speed_capa value. It shows only >> > link_speed value. to get speed_capa values you should write new >> > ethtool-like application for dpdk interfaces. >> >> That would probably need to be a secondary process, hooking up to the >> testpmd process used for testing. Not the simplest solution. >> >> If testpmd is the primary tool used for testing PMDs, it should support >> all features being tested. In other words: Testpmd needs to be updated, so >> it also shows speed_capa. >> >> I also considered ethtool, but it is only listed under Other Example >> Applications, and has no maintainers. So that does not seem to have a >> promising future. >> >> CC: testpmd Maintainers. >> >> Dan > I have filed a bug report on bugzilla regarding testpmd being > updated for this. I will also look into incorporating the suggestion Ivan > made about the naming convention and organization for the config files. > > > -- > > Dan Kirichok > > UNH InterOperability Laboratory > > 21 Madbury Rd, Suite 100, Durham, NH 03824 > > dkiric...@iol.unh.edu > > www.iol.unh.edu > > > > -- Dan Kirichok UNH InterOperability Laboratory 21 Madbury Rd, Suite 100, Durham, NH 03824 dkiric...@iol.unh.edu www.iol.unh.edu
