Hi,
> -----Original Message-----
> From: Alexander Kozyrev <akozy...@mellanox.com>
> Sent: Thursday, June 11, 2020 8:43 PM
> To: dev@dpdk.org
> Cc: sta...@dpdk.org; Raslan Darawsheh <rasl...@mellanox.com>; Matan
> Azrad <ma...@mellanox.com>
> Subject: [PATCH] net/mlx5: fix Rx/Tx descriptors number adjustment
>
> The number of descriptors to configure in a Rx/Tx queue is passed to
> the mlx5_tx/rx_queue_pre_setup() function by value. That means any
> adjustments of this variable are local and cannot affect the actual
> value that is used to allocate mbufs in the mlx5_txq/rxq_new()
> functions. Pass the number as a reference to actually update it.
>
> Fixes: 6218063b ("net/mlx5: refactor Rx data path")
> Fixes: 1d88ba17 ("net/mlx5: refactor Tx data path")
> Cc: sta...@dpdk.org
>
> Signed-off-by: Alexander Kozyrev <akozy...@mellanox.com>
> Acked-by: Matan Azrad <ma...@mellanox.com>
> ---
> drivers/net/mlx5/mlx5_rxq.c | 14 +++++++-------
> drivers/net/mlx5/mlx5_txq.c | 22 +++++++++++-----------
> 2 files changed, 18 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/net/mlx5/mlx5_rxq.c b/drivers/net/mlx5/mlx5_rxq.c
> index 78046fd..dda0073 100644
> --- a/drivers/net/mlx5/mlx5_rxq.c
> +++ b/drivers/net/mlx5/mlx5_rxq.c
> @@ -453,19 +453,19 @@
> * 0 on success, a negative errno value otherwise and rte_errno is set.
> */
> static int
> -mlx5_rx_queue_pre_setup(struct rte_eth_dev *dev, uint16_t idx, uint16_t
> desc)
> +mlx5_rx_queue_pre_setup(struct rte_eth_dev *dev, uint16_t idx, uint16_t
> *desc)
> {
> struct mlx5_priv *priv = dev->data->dev_private;
>
> - if (!rte_is_power_of_2(desc)) {
> - desc = 1 << log2above(desc);
> + if (!rte_is_power_of_2(*desc)) {
> + *desc = 1 << log2above(*desc);
> DRV_LOG(WARNING,
> "port %u increased number of descriptors in Rx
> queue %u"
> " to the next power of two (%d)",
> - dev->data->port_id, idx, desc);
> + dev->data->port_id, idx, *desc);
> }
> DRV_LOG(DEBUG, "port %u configuring Rx queue %u for %u
> descriptors",
> - dev->data->port_id, idx, desc);
> + dev->data->port_id, idx, *desc);
> if (idx >= priv->rxqs_n) {
> DRV_LOG(ERR, "port %u Rx queue index out of range (%u >=
> %u)",
> dev->data->port_id, idx, priv->rxqs_n);
> @@ -511,7 +511,7 @@
> container_of(rxq, struct mlx5_rxq_ctrl, rxq);
> int res;
>
> - res = mlx5_rx_queue_pre_setup(dev, idx, desc);
> + res = mlx5_rx_queue_pre_setup(dev, idx, &desc);
> if (res)
> return res;
> rxq_ctrl = mlx5_rxq_new(dev, idx, desc, socket, conf, mp);
> @@ -552,7 +552,7 @@
> container_of(rxq, struct mlx5_rxq_ctrl, rxq);
> int res;
>
> - res = mlx5_rx_queue_pre_setup(dev, idx, desc);
> + res = mlx5_rx_queue_pre_setup(dev, idx, &desc);
> if (res)
> return res;
> if (hairpin_conf->peer_count != 1 ||
> diff --git a/drivers/net/mlx5/mlx5_txq.c b/drivers/net/mlx5/mlx5_txq.c
> index f7b548f..90f3296 100644
> --- a/drivers/net/mlx5/mlx5_txq.c
> +++ b/drivers/net/mlx5/mlx5_txq.c
> @@ -150,27 +150,27 @@
> * 0 on success, a negative errno value otherwise and rte_errno is set.
> */
> static int
> -mlx5_tx_queue_pre_setup(struct rte_eth_dev *dev, uint16_t idx, uint16_t
> desc)
> +mlx5_tx_queue_pre_setup(struct rte_eth_dev *dev, uint16_t idx, uint16_t
> *desc)
> {
> struct mlx5_priv *priv = dev->data->dev_private;
>
> - if (desc <= MLX5_TX_COMP_THRESH) {
> + if (*desc <= MLX5_TX_COMP_THRESH) {
> DRV_LOG(WARNING,
> "port %u number of descriptors requested for Tx
> queue"
> " %u must be higher than MLX5_TX_COMP_THRESH,
> using %u"
> - " instead of %u",
> - dev->data->port_id, idx, MLX5_TX_COMP_THRESH +
> 1, desc);
> - desc = MLX5_TX_COMP_THRESH + 1;
> + " instead of %u", dev->data->port_id, idx,
> + MLX5_TX_COMP_THRESH + 1, *desc);
> + *desc = MLX5_TX_COMP_THRESH + 1;
> }
> - if (!rte_is_power_of_2(desc)) {
> - desc = 1 << log2above(desc);
> + if (!rte_is_power_of_2(*desc)) {
> + *desc = 1 << log2above(*desc);
> DRV_LOG(WARNING,
> "port %u increased number of descriptors in Tx
> queue"
> " %u to the next power of two (%d)",
> - dev->data->port_id, idx, desc);
> + dev->data->port_id, idx, *desc);
> }
> DRV_LOG(DEBUG, "port %u configuring queue %u for %u
> descriptors",
> - dev->data->port_id, idx, desc);
> + dev->data->port_id, idx, *desc);
> if (idx >= priv->txqs_n) {
> DRV_LOG(ERR, "port %u Tx queue index out of range (%u >=
> %u)",
> dev->data->port_id, idx, priv->txqs_n);
> @@ -213,7 +213,7 @@
> container_of(txq, struct mlx5_txq_ctrl, txq);
> int res;
>
> - res = mlx5_tx_queue_pre_setup(dev, idx, desc);
> + res = mlx5_tx_queue_pre_setup(dev, idx, &desc);
> if (res)
> return res;
> txq_ctrl = mlx5_txq_new(dev, idx, desc, socket, conf);
> @@ -254,7 +254,7 @@
> container_of(txq, struct mlx5_txq_ctrl, txq);
> int res;
>
> - res = mlx5_tx_queue_pre_setup(dev, idx, desc);
> + res = mlx5_tx_queue_pre_setup(dev, idx, &desc);
> if (res)
> return res;
> if (hairpin_conf->peer_count != 1 ||
> --
> 1.8.3.1
Patch applied to next-net-mlx,
Kindest regards,
Raslan Darawsheh
