On 20-May-20 4:18 AM, oulijun wrote:
Hi, David Marchand && guys
I am using 20.05-rc2 version to test based on HNS3 NIC hardware, and
found that after starting l3fwd-power,
using ctrl+c cannot force quit. But I revert the patch(33666b4 service:
fix crash on exit) and it is ok.
the log as follows:
Initializing rx queues on lcore 26 ...
Initializing rx queues on lcore 27 ... rxq=0,0,0 Port 0: softly parse
packet type info
Checking link status...............0000:7d:00.1
hns3_update_link_status(): Link status change to up!
done
Port 0 Link Up - speed 25000 Mbps - full-duplex
L3FWD_POWER: entering main loop on lcore 27
L3FWD_POWER: -- lcoreid=27 portid=0 rxqueueid=0
L3FWD_POWER: lcore 26 has nothing to do
L3FWD_POWER: lcore 27 sleeps until interrupt triggers
L3FWD_POWER: lcore 27 is waked up from rx interrupt on port 0 queue 0
L3FWD_POWER: lcore 27 sleeps until interrupt triggers
L3FWD_POWER: lcore 27 is waked up from rx interrupt on port 0 queue 0
L3FWD_POWER: lcore 27 sleeps until interrupt triggers
L3FWD_POWER: lcore 27 is waked up from rx interrupt on port 0 queue 0
L3FWD_POWER: lcore 27 sleeps until interrupt triggers
L3FWD_POWER: lcore 27 is waked up from rx interrupt on port 0 queue 0
L3FWD_POWER: lcore 27 sleeps until interrupt triggers
L3FWD_POWER: lcore 27 is waked up from rx interrupt on port 0 queue 0
L3FWD_POWER: lcore 27 sleeps until interrupt triggers
L3FWD_POWER: lcore 27 is waked up from rx interrupt on port 0 queue 0
L3FWD_POWER: lcore 27 sleeps until interrupt triggers
L3FWD_POWER: lcore 27 is waked up from rx interrupt on port 0 queue 0
L3FWD_POWER: lcore 27 sleeps until interrupt triggers
L3FWD_POWER: lcore 27 is waked up from rx interrupt on port 0 queue 0
L3FWD_POWER: lcore 27 sleeps until interrupt triggers
L3FWD_POWER: lcore 27 is waked up from rx interrupt on port 0 queue 0
L3FWD_POWER: lcore 27 sleeps until interrupt triggers
L3FWD_POWER: lcore 27 is waked up from rx interrupt on port 0 queue 0
L3FWD_POWER: lcore 27 sleeps until interrupt triggers
L3FWD_POWER: lcore 27 is waked up from rx interrupt on port 0 queue 0
L3FWD_POWER: lcore 27 sleeps until interrupt triggers
^CPOWER: Power management governor of lcore 26 has been set back to
successfully
POWER: Power management of lcore 26 has exited from 'userspace' mode and
been set back to the original
POWER: Power management governor of lcore 27 has been set back to
successfully
POWER: Power management of lcore 27 has exited from 'userspace' mode and
been set back to the original
0000:7d:00.1 hns3_dev_close(): Close port 0 finished
User forced exit
The "user forced exit" string is from before the patches were applied.
You are obviously not using the rc2 version. Please pull down the latest
l3fwd-power code and retest.
[root@centos-C3 build]#
Thanks
Lijun Ou
--
Thanks,
Anatoly
