From: Kalesh AP <kalesh-anakkur.pura...@broadcom.com>
When the driver is loaded on a 200G NIC, the port speed is not
displayed correctly. Parse the 200G speed before displaying it.
Signed-off-by: Kalesh AP <kalesh-anakkur.pura...@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.ko...@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khapa...@broadcom.com>
---
drivers/net/bnxt/bnxt_ethdev.c | 2 ++
drivers/net/bnxt/bnxt_hwrm.c | 12 +++++++++++-
2 files changed, 13 insertions(+), 1 deletion(-)
diff --git a/drivers/net/bnxt/bnxt_ethdev.c b/drivers/net/bnxt/bnxt_ethdev.c
index ee0550b..2ba9d6b 100644
--- a/drivers/net/bnxt/bnxt_ethdev.c
+++ b/drivers/net/bnxt/bnxt_ethdev.c
@@ -693,6 +693,8 @@ static uint32_t bnxt_get_speed_capabilities(struct bnxt *bp)
speed_capa |= ETH_LINK_SPEED_50G;
if (link_speed & HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100GB)
speed_capa |= ETH_LINK_SPEED_100G;
+ if (link_speed & HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_200GB)
+ speed_capa |= ETH_LINK_SPEED_200G;
if (bp->link_info.auto_mode == HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_NONE)
speed_capa |= ETH_LINK_SPEED_FIXED;
diff --git a/drivers/net/bnxt/bnxt_hwrm.c b/drivers/net/bnxt/bnxt_hwrm.c
index ef65107..77a9110 100644
--- a/drivers/net/bnxt/bnxt_hwrm.c
+++ b/drivers/net/bnxt/bnxt_hwrm.c
@@ -2762,6 +2762,10 @@ static uint16_t bnxt_parse_eth_link_speed(uint32_t
conf_link_speed)
eth_link_speed =
HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_100GB;
break;
+ case ETH_LINK_SPEED_200G:
+ eth_link_speed =
+ HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_200GB;
+ break;
default:
PMD_DRV_LOG(ERR,
"Unsupported link speed %d; default to AUTO\n",
@@ -2774,7 +2778,8 @@ static uint16_t bnxt_parse_eth_link_speed(uint32_t
conf_link_speed)
#define BNXT_SUPPORTED_SPEEDS (ETH_LINK_SPEED_100M | ETH_LINK_SPEED_100M_HD | \
ETH_LINK_SPEED_1G | ETH_LINK_SPEED_2_5G | \
ETH_LINK_SPEED_10G | ETH_LINK_SPEED_20G | ETH_LINK_SPEED_25G | \
- ETH_LINK_SPEED_40G | ETH_LINK_SPEED_50G | ETH_LINK_SPEED_100G)
+ ETH_LINK_SPEED_40G | ETH_LINK_SPEED_50G | \
+ ETH_LINK_SPEED_100G | ETH_LINK_SPEED_200G)
static int bnxt_valid_link_speed(uint32_t link_speed, uint16_t port_id)
{
@@ -2840,6 +2845,8 @@ bnxt_parse_eth_link_speed_mask(struct bnxt *bp, uint32_t
link_speed)
ret |= HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_50GB;
if (link_speed & ETH_LINK_SPEED_100G)
ret |= HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_100GB;
+ if (link_speed & ETH_LINK_SPEED_200G)
+ ret |= HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_200GB;
return ret;
}
@@ -2875,6 +2882,9 @@ static uint32_t bnxt_parse_hw_link_speed(uint16_t
hw_link_speed)
case HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_100GB:
eth_link_speed = ETH_SPEED_NUM_100G;
break;
+ case HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_200GB:
+ eth_link_speed = ETH_SPEED_NUM_200G;
+ break;
case HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_2GB:
default:
PMD_DRV_LOG(ERR, "HWRM link speed %d not defined\n",
--
2.10.1
