From: Nic Chautru <nicolas.chau...@intel.com>
Adding capacity to initialize the device driver from
the test-bbdev environment for the new device
FPGA for 5GNR FEC.
Signed-off-by: Nic Chautru <nicolas.chau...@intel.com>
---
app/test-bbdev/Makefile | 3 +++
app/test-bbdev/meson.build | 3 +++
app/test-bbdev/test_bbdev_perf.c | 58 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 64 insertions(+)
diff --git a/app/test-bbdev/Makefile b/app/test-bbdev/Makefile
index c53982f..e951302 100644
--- a/app/test-bbdev/Makefile
+++ b/app/test-bbdev/Makefile
@@ -24,5 +24,8 @@ LDLIBS += -lm
ifeq ($(CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC),y)
LDLIBS += -lrte_pmd_bbdev_fpga_lte_fec
endif
+ifeq ($(CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC),y)
+LDLIBS += -lrte_pmd_bbdev_fpga_5gnr_fec
+endif
include $(RTE_SDK)/mk/rte.app.mk
diff --git a/app/test-bbdev/meson.build b/app/test-bbdev/meson.build
index 4f53a2e..e57e019 100644
--- a/app/test-bbdev/meson.build
+++ b/app/test-bbdev/meson.build
@@ -10,3 +10,6 @@ deps += ['bbdev', 'bus_vdev']
if dpdk_conf.has('RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC')
deps += ['pmd_bbdev_fpga_lte_fec']
endif
+if dpdk_conf.has('RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC')
+ deps += ['pmd_bbdev_fpga_5gnr_fec']
+endif
\ No newline at end of file
diff --git a/app/test-bbdev/test_bbdev_perf.c b/app/test-bbdev/test_bbdev_perf.c
index 1017b97..50ffee0 100644
--- a/app/test-bbdev/test_bbdev_perf.c
+++ b/app/test-bbdev/test_bbdev_perf.c
@@ -39,6 +39,19 @@
#define FLR_4G_TIMEOUT 610
#endif
+#ifdef RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC
+#include <fpga_5gnr_fec.h>
+#define FPGA_5GNR_PF_DRIVER_NAME ("intel_fpga_5gnr_fec_pf")
+#define FPGA_5GNR_VF_DRIVER_NAME ("intel_fpga_5gnr_fec_vf")
+#define VF_UL_5G_QUEUE_VALUE 4
+#define VF_DL_5G_QUEUE_VALUE 4
+#define UL_5G_BANDWIDTH 3
+#define DL_5G_BANDWIDTH 3
+#define UL_5G_LOAD_BALANCE 128
+#define DL_5G_LOAD_BALANCE 128
+#define FLR_5G_TIMEOUT 610
+#endif
+
#define OPS_CACHE_SIZE 256U
#define OPS_POOL_SIZE_MIN 511U /* 0.5K per queue */
@@ -587,6 +600,51 @@ typedef int (test_case_function)(struct active_device *ad,
info->dev_name);
}
#endif
+#ifdef RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC
+ if ((get_init_device() == true) &&
+ (!strcmp(info->drv.driver_name, FPGA_5GNR_PF_DRIVER_NAME))) {
+ struct fpga_5gnr_fec_conf conf;
+ unsigned int i;
+
+ printf("Configure FPGA 5GNR FEC Driver %s with default
values\n",
+ info->drv.driver_name);
+
+ /* clear default configuration before initialization */
+ memset(&conf, 0, sizeof(struct fpga_5gnr_fec_conf));
+
+ /* Set PF mode :
+ * true if PF is used for data plane
+ * false for VFs
+ */
+ conf.pf_mode_en = true;
+
+ for (i = 0; i < FPGA_5GNR_FEC_NUM_VFS; ++i) {
+ /* Number of UL queues per VF (fpga supports 8 VFs) */
+ conf.vf_ul_queues_number[i] = VF_UL_5G_QUEUE_VALUE;
+ /* Number of DL queues per VF (fpga supports 8 VFs) */
+ conf.vf_dl_queues_number[i] = VF_DL_5G_QUEUE_VALUE;
+ }
+
+ /* UL bandwidth. Needed for schedule algorithm */
+ conf.ul_bandwidth = UL_5G_BANDWIDTH;
+ /* DL bandwidth */
+ conf.dl_bandwidth = DL_5G_BANDWIDTH;
+
+ /* UL & DL load Balance Factor to 64 */
+ conf.ul_load_balance = UL_5G_LOAD_BALANCE;
+ conf.dl_load_balance = DL_5G_LOAD_BALANCE;
+
+ /**< FLR timeout value */
+ conf.flr_time_out = FLR_5G_TIMEOUT;
+
+ /* setup FPGA PF with configuration information */
+ ret = fpga_5gnr_fec_configure(info->dev_name, &conf);
+ TEST_ASSERT_SUCCESS(ret,
+ "Failed to configure 5G FPGA PF for bbdev %s",
+ info->dev_name);
+ }
+#endif
+
nb_queues = RTE_MIN(rte_lcore_count(), info->drv.max_num_queues);
nb_queues = RTE_MIN(nb_queues, (unsigned int) MAX_QUEUES);
--
1.8.3.1
