After ports reset, tx laser register will be reset. The link
status for 82599eb got from link status register was not correct.
Set tx laser disable after ports reset.
Fixes: 0408f47ba4d6 ("net/ixgbe: fix busy polling while fiber link update")
Cc: [email protected]
Signed-off-by: Lunyuan Cui <[email protected]>
---
drivers/net/ixgbe/ixgbe_ethdev.c | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
index 8c1caac18..5e516599c 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.c
+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
@@ -1298,6 +1298,8 @@ eth_ixgbe_dev_init(struct rte_eth_dev *eth_dev, void
*init_params __rte_unused)
/* enable support intr */
ixgbe_enable_intr(eth_dev);
+ ixgbe_dev_set_link_down(eth_dev);
+
/* initialize filter info */
memset(filter_info, 0,
sizeof(struct ixgbe_filter_info));
@@ -4154,11 +4156,6 @@ ixgbe_dev_link_update_share(struct rte_eth_dev *dev,
link_up = 0;
if (link_up == 0) {
- if (ixgbe_get_media_type(hw) == ixgbe_media_type_fiber) {
- intr->flags |= IXGBE_FLAG_NEED_LINK_CONFIG;
- rte_eal_alarm_set(10,
- ixgbe_dev_setup_link_alarm_handler, dev);
- }
return rte_eth_linkstatus_set(dev, &link);
}
--
2.17.1
