On 10/24/2019 12:58 PM, Ori Kam wrote: > > >> -----Original Message----- >> From: Xiaoyu Min <jack...@mellanox.com> >> Sent: Monday, September 16, 2019 12:21 PM >> To: Wenzhuo Lu <wenzhuo...@intel.com>; Jingjing Wu >> <jingjing...@intel.com>; Bernard Iremonger >> <bernard.iremon...@intel.com>; Adrien Mazarguil >> <adrien.mazarg...@6wind.com>; John McNamara >> <john.mcnam...@intel.com>; Marko Kovacevic <marko.kovace...@intel.com> >> Cc: dev@dpdk.org; Ori Kam <or...@mellanox.com> >> Subject: [PATCH] app/testpmd: support multiple raw encap/decap >> >> In some scenarios, the raw_encap/raw_decap actions could be multiple in >> one single flow (e,g. hirepin flow): >> >> ... actions raw_decap / raw_encap / raw_decap / raw_encap / ... >> >> This requires the testpmd supports multiple raw_encap/raw_decap data >> settings as well. >> >> With the multiple raw_encap/raw_decap settings, the testpmd commands – >> set raw_encap / set raw_decap will become: >> >> set raw_encap <index> <item pattern> >> set raw_decap <index> <item pattern> >> >> And the actions – raw_encap/raw_decap also could optionally choose which >> global raw_encap/raw_decap confs to be used by index: >> >> ... actions raw_decap index 1 / raw_encap index 2 / ... >> >> If there is no `index` specified, the default index is 0: >> >> set raw_encap <item pattern> >> ... actions raw_decap / raw_encap / ... >> >> which will use raw_encap index 0. >> >> In addition to the set raw_encap/raw_decap commands, >> >> show <raw_encap/raw_decap> <index> >> show <raw_encap/raw_decap> all >> >> are also introduced into in order to check which index is set and to >> what. >> >> Signed-off-by: Xiaoyu Min <jack...@mellanox.com> >> --- > > Acked-by: Ori Kam <or...@mellanox.com>
Applied to dpdk-next-net/master, thanks.
