https://bugs.dpdk.org/show_bug.cgi?id=312
Bug ID: 312
Summary: i40evf could not receive mulicast packets
Product: DPDK
Version: 19.05
Hardware: x86
OS: Linux
Status: CONFIRMED
Severity: major
Priority: Normal
Component: ethdev
Assignee: dev@dpdk.org
Reporter: tb.bin...@qq.com
Target Milestone: ---
Hi all,
I found i40e with SRIOV mode, the vf in DPDK could not receive the multicast
packets. Was it a bug?
> Testing Environment:
>> network card : Ethernet controller: Intel Corporation Ethernet Controller
>> XL710 for 40GbE QSFP
>> CPU : Intel(R) Xeon(R) Silver 4116 CPU @ 2.10GHz
>> OS : Ubuntu 16.04
>> DPDK: 19.05
> Testing Steps:
====================================
# Step 1. Start to send multicast continuously from one PC
$ python multicast.py -I 192.168.99.142 "hello world"
Thu, 04 Jul 2019 11:53:23 DEBUG Joined the multicast network: 224.0.0.5 on
192.168.99.142
Thu, 04 Jul 2019 11:53:23 INFO Sent data: '000000001 1562212403.14 hello
world'
Thu, 04 Jul 2019 11:53:24 INFO Sent data: '000000002 1562212404.14 hello
world'
Thu, 04 Jul 2019 11:53:25 INFO Sent data: '000000003 1562212405.14 hello
world'
Thu, 04 Jul 2019 11:53:26 INFO Sent data: '000000004 1562212406.14 hello
world'
# Step 2. Test VF in NONE-dpdk mode can receive multicast
$ sudo ./dpdk-devbind.py -s
Network devices using DPDK-compatible driver
============================================
Network devices using kernel driver
===================================
0000:19:00.0 'I350 Gigabit Network Connection 1521' if=eth0 drv=igb
unused=igb_uio *Active*
0000:3b:00.0 'Ethernet Controller XL710 for 40GbE QSFP+ 1583' if=eth4 drv=i40e
unused=igb_uio *Active*
0000:3b:00.1 'Ethernet Controller XL710 for 40GbE QSFP+ 1583' if=eth5 drv=i40e
unused=igb_uio
0000:3b:0a.0 'Ethernet Virtual Function 700 Series 154c' if=eth6 drv=i40evf
unused=igb_uio <<<< VF
$ sudo ifconfig eth6 192.168.99.141/24 # <<< configure IP for VF
$ sudo ifconfig eth5 up # <<<< configure PF interface to UP/Running
status
$ sudo tcpdump -i eth6 -n -A -XX host 192.168.99.142 & # <<<< start to capture
on VF card
... <<<<<<<<<< noting
$ sudo ip maddr add 01:00:5e:00:00:05 dev eth6 # <<<< configure maddr for VF
$ sudo tcpdump -i eth6 -n -A -XX host 192.168.99.142
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth6, link-type EN10MB (Ethernet), capture size 262144 bytes
12:00:21.075607 IP 192.168.99.142.56250 > 224.0.0.5.5405: UDP, length 34
0x0000: 0100 5e00 0005 f8f2 1e35 e651 0800 4500 ..^......5.Q..E.
0x0010: 003e c9c2 4000 0111 abb0 c0a8 638e e000 .>..@.......c...
0x0020: 0005 dbba 151d 002a f9de 3030 3030 3030 .......*..000000
0x0030: 3431 3120 3135 3632 3231 3238 3231 2e31 411.1562212821.1
0x0040: 2068 656c 6c6f 2077 6f72 6c64 .hello.world
12:00:22.077017 IP 192.168.99.142.56250 > 224.0.0.5.5405: UDP, length 35
0x0000: 0100 5e00 0005 f8f2 1e35 e651 0800 4500 ..^......5.Q..E.
0x0010: 003f caa4 4000 0111 aacd c0a8 638e e000 .?..@.......c...
0x0020: 0005 dbba 151d 002b 247f 3030 3030 3030 .......+$.000000
0x0030: 3431 3220 3135 3632 3231 3238 3232 2e31 412.1562212822.1
0x0040: 3120 6865 6c6c 6f20 776f 726c 64 1.hello.world
12:00:23.078429 IP 192.168.99.142.56250 > 224.0.0.5.5405: UDP, length 35
<<<< captured the multicast
Step 3: Test VF in DPDK mode could NOT receive multicast
$ sudo ifconfig eth6 down
$ sudo ./dpdk-devbind.py -b igb_uio eth6 # <<<<< bind vf to igb_uio
$ sudo ./build/kni -l 0-5 -n 4 -- -P -p 0x1 -m --config="(0,1,3)" # <<<<
start KNI program
EAL: Detected 48 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Probing VFIO support...
EAL: PCI device 0000:19:00.0 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:19:00.1 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:19:00.2 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:19:00.3 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:3b:00.0 on NUMA socket 0
EAL: probe driver: 8086:1583 net_i40e
EAL: PCI device 0000:3b:00.1 on NUMA socket 0
EAL: probe driver: 8086:1583 net_i40e
EAL: PCI device 0000:3b:0a.0 on NUMA socket 0
EAL: probe driver: 8086:154c net_i40e_vf
APP: Initialising port 0 ...
Checking link status
done
Port0 Link Up - speed 40000Mbps - full-duplex
APP: ========================
APP: KNI Running
APP: kill -SIGUSR1 140041
APP: Show KNI Statistics.
APP: kill -SIGUSR2 140041
APP: Zero KNI Statistics.
APP: ========================
APP: Lcore 1 is reading from port 0
APP: Lcore 2 has nothing to do
APP: Lcore 3 is writing to port 0
APP: Lcore 4 has nothing to do
APP: Lcore 0 has nothing to do
APP: Lcore 5 has nothing to do
APP: Configure network interface of 0 up
APP: vEth0 NIC Link is Up 40000 Mbps (AutoNeg) Full Duplex.
$ sudo ifconfig vEth0 192.168.99.141/24 up # <<< configure KNI interface
$ sudo ip maddr add 01:00:5e:00:00:05 dev vEth0 # <<<< configure maddr for VF
$ sudo tcpdump -i vEth0 -n -A -XX -v host 192.168.99.142 # <<< start to
capture
... <<< NOTHING
$ sudo ifconfig vEth0 allmulti # <<<< configure allmulti for VF in KNI
$ sudo ifconfig vEth0 promisc # <<<< configure promisc for VF in KNI
$ sudo tcpdump -i vEth0 -n -A -XX -v host 192.168.99.142
... <<<<<< still NOTHING
--
You are receiving this mail because:
You are the assignee for the bug.
