On 4/15/2019 6:06 AM, Rosen Xu wrote:
> v8 updates:
> =========
>  - Fix meter color definition replacement
> 
> v7 updates:
> =========
>  - Fix Stephen comments
> 
> v6 updates:
> ==========
>  - Fix v5 comments
>  - Fix TM Shaper rate issue
> 
> v5 updates:
> ==========
>  - Fix EXPERIMENTAL symbol definition issue
> 
> v4 updates:
> ==========
>  - Fix coding style issues
> 
> v3 updates:
> ==========
>  - Fix v2 comments
>  - Update MAC BAR of AFU index get ops
>  - Remove OPAE share code dependency of libfdt
> 
> v2 updates:
> ==========
>  - Fix v1 comments
>  - Add support for 10G Base Line Design Bitstream
>  - Add support for 25G Base Line Design Bitstream
> 
> This patch set adds the support of a new net PMD, IntelĀ® FPGA Programmable
> Acceleration Card N3000, also called ipn3ke.
> 
> The ipn3ke PMD (librte_pmd_ipn3ke) provides poll mode driver support
> for IntelĀ® FPGA PAC(Programmable Acceleration Card) N3000 based on
> the Intel Ethernet Controller X710/XXV710 and Intel Arria 10 FPGA.
> 
> In this card, FPGA is an acceleration bridge between network interface
> and the Intel Ethernet Controller. Although both FPGA and Ethernet
> Controllers are connected to CPU with PCIe Gen3x16 Switch, all the
> packet RX/TX is handled by Intel Ethernet Controller. So from application
> point of view the data path is still the legacy Intel Ethernet Controller
> X710/XXV710 PMD. Besides this, users can enable more acceleration
> features by FPGA IP.
> 
> 
> Rosen Xu (7):
>   bus/ifpga: add AFU shared data
>   bus/ifpga: add function for AFU search by name
>   net/ipn3ke: add IPN3KE ethdev PMD driver
>   net/ipn3ke: add IPN3KE representor of PMD driver
>   net/ipn3ke: add IPN3KE TM of PMD driver
>   net/ipn3ke: add IPN3KE Flow of PMD driver
>   raw/ifpga_rawdev: add IPN3KE support for IFPGA Rawdev
> 
> Tianfei zhang (7):
>   raw/ifpga_rawdev: clean up code for ifpga share code
>   raw/ifpga_rawdev: store private features in FME and Port
>   raw/ifpga_rawdev: add SPI and MAX10 device driver
>   raw/ifpga_rawdev: add I2C and at24 EEPROM driver
>   raw/ifpga_rawdev: add eth group driver
>   raw/ifpga_rawdev: add version description on README
>   raw/ifpga_rawdev: using prefix name for feature and its ops

Hi Rosen,

Overall patchset looks good to me, only there are a few minor issues I have put
comment on individual patches, can you please check them?

Thanks,
ferruh

Reply via email to