> -----Original Message-----
> From: Li, Xiaoyun
> Sent: Friday, November 23, 2018 9:36 AM
> To: Zhang, Qi Z <qi.z.zh...@intel.com>
> Cc: dev@dpdk.org; Li, Xiaoyun <xiaoyun...@intel.com>
> Subject: [PATCH] net/i40e: adjust the RSS table
>
> When starting the device, the RSS table is set. For 8 queues, the RSS hash
> table
> would be like | 3,2,1,0,7,6,5,4 | 3,2,1,0,7,6,5,4 |... This patch adjusts
> this table
> to set entries sequentially. Then for 8 queues, the RSS table would be like |
> 0,1,2,3,4,5,6,7 | 0,1,2,3,4,5,6,7 |...
My understanding is this is a byte order issue.
Does below change will fix the same thing?
- I40E_WRITE_REG(hw, I40E_PFQF_HLUT(i >> 2), lut);
- I40E_WRITE_REG(hw, I40E_PFQF_HLUT(i >> 2), rte_bswap32(lut));
>
> Signed-off-by: Xiaoyun Li <xiaoyun...@intel.com>
> ---
> drivers/net/i40e/i40e_ethdev.c | 15 ++++++++++-----
> 1 file changed, 10 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
> index 790ecc3..031eba0 100644
> --- a/drivers/net/i40e/i40e_ethdev.c
> +++ b/drivers/net/i40e/i40e_ethdev.c
> @@ -8468,6 +8468,7 @@ i40e_pf_config_rss(struct i40e_pf *pf) {
> struct i40e_hw *hw = I40E_PF_TO_HW(pf);
> struct rte_eth_rss_conf rss_conf;
> + uint32_t size = hw->func_caps.rss_table_size;
> uint32_t i, lut = 0;
> uint16_t j, num;
>
> @@ -8489,13 +8490,17 @@ i40e_pf_config_rss(struct i40e_pf *pf)
> return -ENOTSUP;
> }
>
> - for (i = 0, j = 0; i < hw->func_caps.rss_table_size; i++, j++) {
> - if (j == num)
> - j = 0;
> + for (i = size - 1, j = (size - 1) % num;; i--, j--) {
> lut = (lut << 8) | (j & ((0x1 <<
> - hw->func_caps.rss_table_entry_width) - 1));
> - if ((i & 3) == 3)
> + hw->func_caps.rss_table_entry_width) - 1));
> +
> + if (j == 0)
> + j = num;
> +
> + if ((i & 3) == 0)
> I40E_WRITE_REG(hw, I40E_PFQF_HLUT(i >> 2), lut);
> + if (i == 0)
> + break;
> }
>
> rss_conf = pf->dev_data->dev_conf.rx_adv_conf.rss_conf;
> --
> 2.7.4
