From: Zyta Szpak <z...@semihalf.com>
Add callback for updating information about link status/info.
Signed-off-by: Natalie Samsonov <nsams...@marvell.com>
Signed-off-by: Zyta Szpak <z...@semihalf.com>
---
doc/guides/nics/features/mvneta.ini | 1 +
doc/guides/nics/mvneta.rst | 1 +
drivers/net/mvneta/mvneta_ethdev.c | 71 +++++++++++++++++++++++++++++++++++++
3 files changed, 73 insertions(+)
diff --git a/doc/guides/nics/features/mvneta.ini
b/doc/guides/nics/features/mvneta.ini
index bc4e400..581ed31 100644
--- a/doc/guides/nics/features/mvneta.ini
+++ b/doc/guides/nics/features/mvneta.ini
@@ -5,6 +5,7 @@
;
[Features]
Speed capabilities = Y
+Link status = Y
MTU update = Y
Jumbo frame = Y
CRC offload = Y
diff --git a/doc/guides/nics/mvneta.rst b/doc/guides/nics/mvneta.rst
index b9f87f4..290bb1a 100644
--- a/doc/guides/nics/mvneta.rst
+++ b/doc/guides/nics/mvneta.rst
@@ -31,6 +31,7 @@ Features of the MVNETA PMD are:
- Speed capabilities
- Jumbo frame
- MTU update
+- Link status
- CRC offload
- L3 checksum offload
- L4 checksum offload
diff --git a/drivers/net/mvneta/mvneta_ethdev.c
b/drivers/net/mvneta/mvneta_ethdev.c
index a3cefeb..3c450d2 100644
--- a/drivers/net/mvneta/mvneta_ethdev.c
+++ b/drivers/net/mvneta/mvneta_ethdev.c
@@ -477,6 +477,76 @@ mvneta_dev_close(struct rte_eth_dev *dev)
}
/**
+ * DPDK callback to retrieve physical link information.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param wait_to_complete
+ * Wait for request completion (ignored).
+ *
+ * @return
+ * 0 on success, negative error value otherwise.
+ */
+static int
+mvneta_link_update(struct rte_eth_dev *dev, int wait_to_complete __rte_unused)
+{
+ /*
+ * TODO
+ * once MUSDK provides necessary API use it here
+ */
+ struct mvneta_priv *priv = dev->data->dev_private;
+ struct ethtool_cmd edata;
+ struct ifreq req;
+ int ret, fd, link_up;
+
+ if (!priv->ppio)
+ return -EPERM;
+
+ edata.cmd = ETHTOOL_GSET;
+
+ strcpy(req.ifr_name, dev->data->name);
+ req.ifr_data = (void *)&edata;
+
+ fd = socket(AF_INET, SOCK_DGRAM, 0);
+ if (fd == -1)
+ return -EFAULT;
+ ret = ioctl(fd, SIOCETHTOOL, &req);
+ if (ret == -1) {
+ close(fd);
+ return -EFAULT;
+ }
+
+ close(fd);
+
+ switch (ethtool_cmd_speed(&edata)) {
+ case SPEED_10:
+ dev->data->dev_link.link_speed = ETH_SPEED_NUM_10M;
+ break;
+ case SPEED_100:
+ dev->data->dev_link.link_speed = ETH_SPEED_NUM_100M;
+ break;
+ case SPEED_1000:
+ dev->data->dev_link.link_speed = ETH_SPEED_NUM_1G;
+ break;
+ case SPEED_2500:
+ dev->data->dev_link.link_speed = ETH_SPEED_NUM_2_5G;
+ break;
+ default:
+ dev->data->dev_link.link_speed = ETH_SPEED_NUM_NONE;
+ }
+
+ dev->data->dev_link.link_duplex = edata.duplex ? ETH_LINK_FULL_DUPLEX :
+ ETH_LINK_HALF_DUPLEX;
+ dev->data->dev_link.link_autoneg = edata.autoneg ? ETH_LINK_AUTONEG :
+ ETH_LINK_FIXED;
+
+ neta_ppio_get_link_state(priv->ppio, &link_up);
+ dev->data->dev_link.link_status = link_up ? ETH_LINK_UP : ETH_LINK_DOWN;
+
+ return 0;
+}
+
+/**
* DPDK callback to set the primary MAC address.
*
* @param dev
@@ -509,6 +579,7 @@ static const struct eth_dev_ops mvneta_ops = {
.dev_set_link_up = mvneta_dev_set_link_up,
.dev_set_link_down = mvneta_dev_set_link_down,
.dev_close = mvneta_dev_close,
+ .link_update = mvneta_link_update,
.mac_addr_set = mvneta_mac_addr_set,
.mtu_set = mvneta_mtu_set,
.dev_infos_get = mvneta_dev_infos_get,
--
2.7.4
