[dpdk-dev] [PATCH 2/4] bus/vmbus: add host latency tuning function

[Stephen Hemminger]

Add vmbus API to allow tuning the scan interval on the host side.

Signed-off-by: Stephen Hemminger <sthem...@microsoft.com>
---
 drivers/bus/vmbus/rte_bus_vmbus.h           | 15 ++++++++++++
 drivers/bus/vmbus/rte_bus_vmbus_version.map |  1 +
 drivers/bus/vmbus/vmbus_channel.c           | 26 +++++++++++++++++++++
 3 files changed, 42 insertions(+)

diff --git a/drivers/bus/vmbus/rte_bus_vmbus.h 
b/drivers/bus/vmbus/rte_bus_vmbus.h
index 4a2c1f6fd918..2839fef5b27a 100644
--- a/drivers/bus/vmbus/rte_bus_vmbus.h
+++ b/drivers/bus/vmbus/rte_bus_vmbus.h
@@ -364,6 +364,21 @@ void rte_vmbus_chan_signal_read(struct vmbus_channel 
*chan, uint32_t bytes_read)
  */
 uint16_t rte_vmbus_sub_channel_index(const struct vmbus_channel *chan);
 
+/**
+ * Set the host monitor latency hint
+ *
+ * @param dev
+ *    VMBUS device
+ * @param chan
+ *     Pointer to vmbus_channel structure.
+ * @param latency
+ *     Approximate wait period between hypervisor examinations of
+ *     the trigger page (in nanoseconds).
+ */
+void rte_vmbus_set_latency(const struct rte_vmbus_device *dev,
+                          const struct vmbus_channel *chan,
+                          uint32_t latency);
+
 /**
  * Register a VMBUS driver.
  *
diff --git a/drivers/bus/vmbus/rte_bus_vmbus_version.map 
b/drivers/bus/vmbus/rte_bus_vmbus_version.map
index dabb9203104b..5b01ff30d7b0 100644
--- a/drivers/bus/vmbus/rte_bus_vmbus_version.map
+++ b/drivers/bus/vmbus/rte_bus_vmbus_version.map
@@ -20,6 +20,7 @@ DPDK_18.08 {
        rte_vmbus_probe;
        rte_vmbus_register;
        rte_vmbus_scan;
+       rte_vmbus_set_latency;
        rte_vmbus_sub_channel_index;
        rte_vmbus_subchan_open;
        rte_vmbus_unmap_device;
diff --git a/drivers/bus/vmbus/vmbus_channel.c 
b/drivers/bus/vmbus/vmbus_channel.c
index cc5f3e8379a5..bd14c0662b46 100644
--- a/drivers/bus/vmbus/vmbus_channel.c
+++ b/drivers/bus/vmbus/vmbus_channel.c
@@ -59,6 +59,32 @@ vmbus_set_event(const struct rte_vmbus_device *dev,
        vmbus_set_monitor(dev, chan->monitor_id);
 }
 
+/*
+ * Set the wait between when hypervisor examines the trigger.
+ */
+void
+rte_vmbus_set_latency(const struct rte_vmbus_device *dev,
+                     const struct vmbus_channel *chan,
+                     uint32_t latency)
+{
+       uint32_t trig_idx = chan->monitor_id / VMBUS_MONTRIG_LEN;
+       uint32_t trig_offs = chan->monitor_id % VMBUS_MONTRIG_LEN;
+
+       if (latency >= UINT16_MAX * 100) {
+               VMBUS_LOG(ERR, "invalid latency value %u", latency);
+               return;
+       }
+
+       if (trig_idx >= VMBUS_MONTRIGS_MAX) {
+               VMBUS_LOG(ERR, "invalid monitor trigger %u",
+                         trig_idx);
+               return;
+       }
+
+       /* Host value is expressed in 100 nanosecond units */
+       dev->monitor_page->lat[trig_idx][trig_offs] = latency / 100;
+}
+
 /*
  * Notify host that there are data pending on our TX bufring.
  *
-- 
2.18.0