Tuesday, July 24, 2018 11:37 AM, Nelio Laranjeiro:
> Subject: [PATCH v2] net/mlx5: fix representors detection
>
> On systems where the required Netlink commands are not supported but
> Mellanox OFED is installed, representors information must be retrieved
> through sysfs.
>
> Fixes: 4c10141488fe ("net/mlx5: add port representor awareness")
>
> Signed-off-by: Nelio Laranjeiro <nelio.laranje...@6wind.com>
>
Applied to next-net-mlx, thanks.
> ---
>
> Changes in v2:
>
> On some distribution, the PF may not be able to open the sysfs file, such
> issue should not be handled as an error.
> ---
> drivers/net/mlx5/mlx5.c | 7 +++--
> drivers/net/mlx5/mlx5.h | 2 ++
> drivers/net/mlx5/mlx5_ethdev.c | 53
> ++++++++++++++++++++++++++++++++++
> 3 files changed, 60 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c index
> 78a69228e..a1c0ad70a 100644
> --- a/drivers/net/mlx5/mlx5.c
> +++ b/drivers/net/mlx5/mlx5.c
> @@ -1330,7 +1330,8 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv
> __rte_unused,
> * Netlink calls assuming kernel drivers are recent enough to
> * support them.
> *
> - * In the event of identification failure through Netlink, either:
> + * In the event of identification failure through Netlink, try again
> + * through sysfs, then either:
> *
> * 1. No device matches (n == 0), complain and bail out.
> * 2. A single IB device matches (n == 1) and is not a representor, @@
> -1349,7 +1350,9 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv
> __rte_unused,
> if (nl_route < 0 ||
> !list[i].ifindex ||
> mlx5_nl_switch_info(nl_route, list[i].ifindex,
> - &list[i].info)) {
> + &list[i].info) ||
> + ((!list[i].info.representor && !list[i].info.master) &&
> + mlx5_sysfs_switch_info(list[i].ifindex, &list[i].info))) {
> list[i].ifindex = 0;
> memset(&list[i].info, 0, sizeof(list[i].info));
> continue;
> diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h index
> db8a5fa01..a7f50b31f 100644
> --- a/drivers/net/mlx5/mlx5.h
> +++ b/drivers/net/mlx5/mlx5.h
> @@ -273,6 +273,8 @@ eth_rx_burst_t mlx5_select_rx_function(struct
> rte_eth_dev *dev); unsigned int mlx5_dev_to_port_id(const struct
> rte_device *dev,
> uint16_t *port_list,
> unsigned int port_list_n);
> +int mlx5_sysfs_switch_info(unsigned int ifindex,
> + struct mlx5_switch_info *info);
>
> /* mlx5_mac.c */
>
> diff --git a/drivers/net/mlx5/mlx5_ethdev.c
> b/drivers/net/mlx5/mlx5_ethdev.c index 9cf2dc5f1..4a24f8021 100644
> --- a/drivers/net/mlx5/mlx5_ethdev.c
> +++ b/drivers/net/mlx5/mlx5_ethdev.c
> @@ -1321,3 +1321,56 @@ mlx5_dev_to_port_id(const struct rte_device
> *dev, uint16_t *port_list,
> }
> return n;
> }
> +
> +/**
> + * Get switch information associated with network interface.
> + *
> + * @param ifindex
> + * Network interface index.
> + * @param[out] info
> + * Switch information object, populated in case of success.
> + *
> + * @return
> + * 0 on success, a negative errno value otherwise and rte_errno is set.
> + */
> +int
> +mlx5_sysfs_switch_info(unsigned int ifindex, struct mlx5_switch_info
> +*info) {
> + char ifname[IF_NAMESIZE];
> + FILE *file;
> + struct mlx5_switch_info data = { .master = 0, };
> + bool port_name_set = false;
> + bool port_switch_id_set = false;
> + char c;
> +
> + if (!if_indextoname(ifindex, ifname)) {
> + rte_errno = errno;
> + return -rte_errno;
> + }
> +
> + MKSTR(phys_port_name, "/sys/class/net/%s/phys_port_name",
> + ifname);
> + MKSTR(phys_switch_id, "/sys/class/net/%s/phys_switch_id",
> + ifname);
> +
> + file = fopen(phys_port_name, "rb");
> + if (file != NULL) {
> + port_name_set =
> + fscanf(file, "%d%c", &data.port_name, &c) == 2 &&
> + c == '\n';
> + fclose(file);
> + }
> + file = fopen(phys_switch_id, "rb");
> + if (file == NULL) {
> + rte_errno = errno;
> + return -rte_errno;
> + }
> + port_switch_id_set =
> + fscanf(file, "%" SCNx64 "%c", &data.switch_id, &c) == 2 &&
> + c == '\n';
> + fclose(file);
> + data.master = port_switch_id_set && !port_name_set;
> + data.representor = port_switch_id_set && port_name_set;
> + *info = data;
> + return 0;
> +}
> --
> 2.18.0
