On systems where the required Netlink commands are not supported but
Mellanox OFED is installed, representors information must be retrieved
through sysfs.

Fixes: 4c10141488fe ("net/mlx5: add port representor awareness")

Signed-off-by: Nelio Laranjeiro <nelio.laranje...@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarg...@6wind.com>
---
 drivers/net/mlx5/mlx5.c        |  7 +++--
 drivers/net/mlx5/mlx5.h        |  2 ++
 drivers/net/mlx5/mlx5_ethdev.c | 53 ++++++++++++++++++++++++++++++++++
 3 files changed, 60 insertions(+), 2 deletions(-)

diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c
index df7f39844..8174947f3 100644
--- a/drivers/net/mlx5/mlx5.c
+++ b/drivers/net/mlx5/mlx5.c
@@ -1306,7 +1306,8 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv 
__rte_unused,
         * Netlink calls assuming kernel drivers are recent enough to
         * support them.
         *
-        * In the event of identification failure through Netlink, either:
+        * In the event of identification failure through Netlink, try again
+        * through sysfs, then either:
         *
         * 1. No device matches (n == 0), complain and bail out.
         * 2. A single IB device matches (n == 1) and is not a representor,
@@ -1325,7 +1326,9 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv 
__rte_unused,
                if (nl_route < 0 ||
                    !list[i].ifindex ||
                    mlx5_nl_switch_info(nl_route, list[i].ifindex,
-                                       &list[i].info)) {
+                                       &list[i].info) ||
+                   ((!list[i].info.representor && !list[i].info.master) &&
+                    mlx5_sysfs_switch_info(list[i].ifindex, &list[i].info))) {
                        list[i].ifindex = 0;
                        memset(&list[i].info, 0, sizeof(list[i].info));
                        continue;
diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
index cc01310e0..fff88b1d6 100644
--- a/drivers/net/mlx5/mlx5.h
+++ b/drivers/net/mlx5/mlx5.h
@@ -254,6 +254,8 @@ eth_rx_burst_t mlx5_select_rx_function(struct rte_eth_dev 
*dev);
 unsigned int mlx5_dev_to_port_id(const struct rte_device *dev,
                                 uint16_t *port_list,
                                 unsigned int port_list_n);
+int mlx5_sysfs_switch_info(unsigned int ifindex,
+                          struct mlx5_switch_info *info);
 
 /* mlx5_mac.c */
 
diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c
index 05f66f7b6..101be4791 100644
--- a/drivers/net/mlx5/mlx5_ethdev.c
+++ b/drivers/net/mlx5/mlx5_ethdev.c
@@ -1296,3 +1296,56 @@ mlx5_dev_to_port_id(const struct rte_device *dev, 
uint16_t *port_list,
        }
        return n;
 }
+
+/**
+ * Get switch information associated with network interface.
+ *
+ * @param ifindex
+ *   Network interface index.
+ * @param[out] info
+ *   Switch information object, populated in case of success.
+ *
+ * @return
+ *   0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_sysfs_switch_info(unsigned int ifindex, struct mlx5_switch_info *info)
+{
+       char ifname[IF_NAMESIZE];
+       FILE *file;
+       struct mlx5_switch_info data = { .master = 0, };
+       bool port_name_set = false;
+       bool port_switch_id_set = false;
+       char c;
+
+       if (!if_indextoname(ifindex, ifname)) {
+               rte_errno = errno;
+               return -rte_errno;
+       }
+
+       MKSTR(phys_port_name, "/sys/class/net/%s/phys_port_name",
+             ifname);
+       MKSTR(phys_switch_id, "/sys/class/net/%s/phys_switch_id",
+             ifname);
+
+       file = fopen(phys_port_name, "rb");
+       if (file == NULL)
+               goto error;
+       port_name_set = fscanf(file, "%d%c", &data.port_name, &c) == 2 &&
+               c == '\n';
+       fclose(file);
+       file = fopen(phys_switch_id, "rb");
+       if (file == NULL)
+               goto error;
+       port_switch_id_set =
+               fscanf(file, "%" SCNx64 "%c", &data.switch_id, &c) == 2 &&
+               c == '\n';
+       fclose(file);
+       data.master = port_switch_id_set && !port_name_set;
+       data.representor = port_switch_id_set && port_name_set;
+       *info = data;
+       return 0;
+error:
+       rte_errno = errno;
+       return -rte_errno;
+}
-- 
2.18.0

Reply via email to