Added info in testpmd functions section for the following commands: - tunnel_filter add - tunnel_filter rm - rx_vxlan_port add - rx_vxlan_port rm - port stop/start queue - set port mac address filter (for VF)
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch at intel.com> --- doc/guides/testpmd_app_ug/testpmd_funcs.rst | 47 +++++++++++++++++++++++++++ 1 files changed, 47 insertions(+), 0 deletions(-) diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst index c0d0033..a2b76d7 100644 --- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst +++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst @@ -456,6 +456,36 @@ Set the outer VLAN TPID for packet filtering on a port: rx_vlan set tpid (value) (port_id) +tunnel_filter add +~~~~~~~~~~~~~~~~ + +Add a tunnel filter on a port: + +tunnel_filter add (port_id) (outer_mac) (inner_mac) (ip_addr) (inner_vlan) + (tunnel_type) (filter_type) (tenant_id) (queue_id) + +tunnel_filter remove +~~~~~~~~~~~~~~~~~~~ + +Remove a tunnel filter on a port: + +tunnel_filter rm (port_id) (outer_mac) (inner_mac) (ip_addr) (inner_vlan) + (tunnel_type) (filter_type) (tenant_id) (queue_id) + +rx_vxlan_port add +~~~~~~~~~~~~~~~~ + +Add an UDP port for VXLAN packet filter on a port: + +rx_vxlan_port add (udp_port) (port_id) + +rx_vxlan_port remove +~~~~~~~~~~~~~~~~~~~ + +Remove an UDP port for VXLAN packet filter on a port: + +rx_vxlan_port rm (udp_port) (port_id) + tx_vlan set ~~~~~~~~~~~ @@ -635,6 +665,14 @@ Set VF receive/transmit from a port: set port (port_id) vf (vf_id) (rx|tx) (on|off) +set port - mac address filter (for VF) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Add/Remove unicast or multicast MAC addr filter for a VF: + +set port (port_id) vf (vf_id) (mac_addr) + (exact-mac|exact-mac-vlan|hashmac|hashmac-vlan) (on|off) + set port - rx mode(for VF) ~~~~~~~~~~~~~~~~~~~~~~~~~~ @@ -1061,6 +1099,15 @@ Close all ports or a specific port: port close (port_id|all) +port start/stop queue +~~~~~~~~~~~~~~~~~~~~ + +Start/stop a rx/tx queue on a specific port: + +port (port_id) (rxq|txq) (queue_id) (start|stop) + +Only take effect when port is started. + port config - speed ~~~~~~~~~~~~~~~~~~~ -- 1.7.4.1
