down the port 0000:0b:00.1 from linux igb, then bind it to igb_uio
On Tue, Sep 10, 2013 at 12:34 PM, Jayakumar Satri < JS00123073 at techmahindra.com> wrote: > Hi, > > In the DPDK getting started guide, the following is mentioned. > > "By default, Intel(r) DPDK applications automatically unbind all support > network ports from the kernel driver in use and rebind those ports to > the igb_uio driver." > > > > I am using DPDK.L.1.4.1-4. I run the l2fwd application from the > examples. I get the following error. Request your guidance in overcoming > this. > > EAL: PCI device 0000:0b:00.1 on NUMA socket 0 > > EAL: probe driver: 8086:10fb rte_ixgbe_pmd > > EAL: 0000:0b:00.1 not managed by UIO driver, skipping > > EAL: Error - exiting with code: 1 > > > > Also, when I used the pci_undind tool, I get the message - Routing table > indicates that interface 0000:0b:00.1 is active. Not modifying > > > > Regards, > > Jaya Kumar. > > > > ============================================================================================================================ > Disclaimer: This message and the information contained herein is > proprietary and confidential and subject to the > Tech Mahindra policy statement, you may review the policy at <a href=" > http://www.techmahindra.com/Disclaimer.html";> > http://www.techmahindra.com/Disclaimer.html</a> > externally and <a href="http://tim.techmahindra.com/tim/disclaimer.html";> > http://tim.techmahindra.com/tim/disclaimer.html</a> internally within > Tech Mahindra. > > ============================================================================================================================ >
