Hi,
In the DPDK getting started guide, the following is mentioned.
"By default, Intel(r) DPDK applications automatically unbind all support
network ports from the kernel driver in use and rebind those ports to
the igb_uio driver."
I am using DPDK.L.1.4.1-4. I run the l2fwd application from the
examples. I get the following error. Request your guidance in overcoming
this.
EAL: PCI device 0000:0b:00.1 on NUMA socket 0
EAL: probe driver: 8086:10fb rte_ixgbe_pmd
EAL: 0000:0b:00.1 not managed by UIO driver, skipping
EAL: Error - exiting with code: 1
Also, when I used the pci_undind tool, I get the message - Routing table
indicates that interface 0000:0b:00.1 is active. Not modifying
Regards,
Jaya Kumar.
============================================================================================================================
Disclaimer: This message and the information contained herein is proprietary
and confidential and subject to the
Tech Mahindra policy statement, you may review the policy at <a
href="http://www.techmahindra.com/Disclaimer.html";>http://www.techmahindra.com/Disclaimer.html</a>
externally and <a
href="http://tim.techmahindra.com/tim/disclaimer.html";>http://tim.techmahindra.com/tim/disclaimer.html</a>
internally within Tech Mahindra.
============================================================================================================================
