Hi Daniel, Can you please bump that setting to 15 or 20 and restart mgt server? Then start the router again.
Let me know! Regards, Remi Sent from my iPhone > On 28 Jan 2016, at 07:00, Daniel Mezentsev <d...@soleks.com> wrote: > > Hi Remi, > > Setup is the following > Cloudstack 4.7.1 > One cluster of XenServers (6.2) - 4 hosts > Advanced network > That 2 routers i have problems with are just DNS and DHCP providers, they > are not actibe as default gateway for VMs, > there are ~10-12 VMs. > > router.aggregation.command.each.timeout=3 > >> Hi Daniel, >> >> At what value is router.aggregation.command.each.timeout global setting? >> >> Can you tell a bit about your setup, what the router does (config) as in >> how many VMs, tiers, public IPs etc. >> >> Regards, Remi >> >> Sent from my iPhone >> >>> On 28 Jan 2016, at 05:18, Daniel Mezentsev <d...@soleks.com> wrote: >>> >>> Hi Remi, >>> >>> I just upgraded 4.6.2->4.7.1 The same issue, unable to start 2 VRs (out >>> of >>> 8 total). VR actually is started, running for 5-7 minutes, then shuting >>> down. One thing that i noticed in the log: >>> >>> arping -c 1 -I eth0 -A -U -s 10.1.12.1 None >>> >>> What is "None" here ? >>> >>> Please let me know what information from the log can i provide you to >>> help >>> with troubleshooting. I noticed that there are a lot of the same issues >>> happened after upgrade to 4.6, seems like it's getting critical. >>> >>>> No, just the same template so it's just a matter of upgrading package. >>>> Will ping you when the release is ready. >>>> >>>> Regards, Remi >>>> >>>> Sent from my iPhone >>>> >>>>> On 25 Jan 2016, at 21:41, Daniel Mezentsev <d...@soleks.com> wrote: >>>>> >>>>> Hi Remi, >>>>> >>>>> Absolutely. I don't see any issue to do upgrade to 4.7.1. Will it be >>> >>> with >>>>> new templates for system VMs ? >>>>> >>>>>> Hi Daniel, >>>>>> >>>>>> Is upgrading to 4.7.1 (once released tomorrow) an option? It has many >>>>>> improvements over 4.6.x and I'm quite sure it fixes the problem you >>>>>> experience now. >>>>>> >>>>>> Regards, Remi >>>>>> >>>>>> Sent from my iPhone >>>>>> >>>>>>> On 25 Jan 2016, at 16:29, Daniel Mezentsev <d...@soleks.com> wrote: >>>>>>> >>>>>>> in my configuration VR is acting as DHCP/DNS server, so it's not >>>>>>> passing >>>>>>> any traffic, so i can exclude public IP addresses. Definetely there >>>>>>> is >>>>>>> one >>>>>>> of the VR script is acting badly. >>>>>>> >>>>>>>> If I disassociated 10 public IPs and keep 10 public IPs (but keep > 20 >>>>> >>>>> vms >>>>>>>> associated with the network), the network (virtual router) restart >>>>>>>> with >>>>>>>> clean up successfully (around in 3 min). >>>>>>>> I thinks that is a timeout problem (or VR scripts performance)... >>>>>>>> but >>>>>>>> which timeout parameter? >>>>>>>> >>>>>>>>> On 24/01/2016 09:43, Milamber wrote: >>>>>>>>> Please note, my installation type is Advanced network without >>>>>>>>> security >>>>>>>>> groups (vlan isolation). >>>>>>>>> >>>>>>>>>> On 24/01/2016 06:57, Remi Bergsma wrote: >>>>>>>>>> Hi, >>>>>>>>>> >>>>>>>>>> We have seen this issue sometimes in the VRs from 4.6 and on. >>>>>>>>>> There >>>>>>>>>> have been several improvements in the code in 4.7. >>>>>>>>>> >>>>>>>>>> Also, setting router.aggregation.command.each.timeout global >>> >>> setting >>>>>>>>>> to 15 or 20 also may help (restart mgt server after change). >>>>>>>>>> >>>>>>>>>> @Milamber can you test this setting with 4.7.1RC please? I > haven't >>>>>>>>>> seen this issue in my test and production systems. >>>>>>>>>> >>>>>>>>>> Thanks, Remi >>>>>>>>>> >>>>>>>>>> Sent from my iPhone >>>>>>>>>> >>>>>>>>>>> On 24 Jan 2016, at 00:49, Milamber <milam...@apache.org> wrote: >>>>>>>>>>> >>>>>>>>>>> Hello, >>>>>>>>>>> >>>>>>>>>>> I've have a similiar issue without solution (but not with an >>>>>>>>>>> upgrade >>>>>>>>>>> from 4.5), please see >>>>>>>>>>> https://issues.apache.org/jira/browse/CLOUDSTACK-9255 >>>>>>>>>>> >>>>>>>>>>> Milamber >>>>>>>>>>> >>>>>>>>>>>> On 24/01/2016 03:32, Daniel Mezentsev wrote: >>>>>>>>>>>> Hi All, >>>>>>>>>>>> >>>>>>>>>>>> I've got some issue after i did cloudstack upgrade 4.5 -> > 4.6.2. >>>>>>>>>>>> Environment has 8 VR, 6 were upgraded and restarted >>>>>>>>>>>> successfully, 2 >>>>>>>>>>>> of them >>>>>>>>>>>> stuck. I removed them - the same result, i can't boot them, >>>>>>>>>>>> restarted >>>>>>>>>>>> network with clean-up - no luck. >>>>>>>>>>>> VR actually is starting, i can ssh to it, but it's shuting down >>> >>> in >>>>>>>>>>>> approx 5 >>>>>>>>>>>> minutes. I can extend it runing >>>>>>>>>>>> "init 3" command, but cloudstack is not detecting router state. >>>>>>>>>>>> >>>>>>>>>>>> I can bing some VMs within the same subnet, so it's not >>>>> >>>>> VLAN/network >>>>>>>>>>>> issue. >>>>>>>>>>>> >>>>>>>>>>>> Completely ran out of ideas. >>>>>>>>>>>> Should mention network offering is Isolated network without > NAT. >>>>>>>>>>>> >>>>>>>>>>>> Any help is more then welcome. I can provide any related log, >>>>>>>>>>>> but i >>>>>>>>>>>> need >>>>>>>>>>>> some heads-up what i should look for. >>>>>>>>>>>> Daniel Mezentsev, founder >>>>>>>>>>>> (+1) 604 313 8592. >>>>>>>>>>>> Soleks Data Group. >>>>>>>>>>>> Shaping the clouds. >>>>>>> >>>>>>> Daniel Mezentsev, founder >>>>>>> (+1) 604 313 8592. >>>>>>> Soleks Data Group.Shaping the clouds. >>>>> >>>>> Daniel Mezentsev, founder >>>>> (+1) 604 313 8592. >>>>> Soleks Data Group.Shaping the clouds. >>> >>> Daniel Mezentsev, founder >>> (+1) 604 313 8592. >>> Soleks Data Group.Shaping the clouds. > Daniel Mezentsev, founder > (+1) 604 313 8592. > Soleks Data Group. > Shaping the clouds.
