Hi Remi,
I just upgraded 4.6.2->4.7.1 The same issue, unable to start 2 VRs (out of
8 total). VR actually is started, running for 5-7 minutes, then shuting
down. One thing that i noticed in the log:
arping -c 1 -I eth0 -A -U -s 10.1.12.1 None
What is "None" here ?
Please let me know what information from the log can i provide you to help
with troubleshooting. I noticed that there are a lot of the same issues
happened after upgrade to 4.6, seems like it's getting critical.
No, just the same template so it's just a matter of upgrading package.
Will ping you when the release is ready.
Regards, Remi
Sent from my iPhone
On 25 Jan 2016, at 21:41, Daniel Mezentsev <d...@soleks.com> wrote:
Hi Remi,
Absolutely. I don't see any issue to do upgrade to 4.7.1. Will it be
with
new templates for system VMs ?
Hi Daniel,
Is upgrading to 4.7.1 (once released tomorrow) an option? It has many
improvements over 4.6.x and I'm quite sure it fixes the problem you
experience now.
Regards, Remi
Sent from my iPhone
On 25 Jan 2016, at 16:29, Daniel Mezentsev <d...@soleks.com> wrote:
in my configuration VR is acting as DHCP/DNS server, so it's not
passing
any traffic, so i can exclude public IP addresses. Definetely there is
one
of the VR script is acting badly.
If I disassociated 10 public IPs and keep 10 public IPs (but keep 20
vms
associated with the network), the network (virtual router) restart
with
clean up successfully (around in 3 min).
I thinks that is a timeout problem (or VR scripts performance)... but
which timeout parameter?
On 24/01/2016 09:43, Milamber wrote:
Please note, my installation type is Advanced network without
security
groups (vlan isolation).
On 24/01/2016 06:57, Remi Bergsma wrote:
Hi,
We have seen this issue sometimes in the VRs from 4.6 and on. There
have been several improvements in the code in 4.7.
Also, setting router.aggregation.command.each.timeout global
setting
to 15 or 20 also may help (restart mgt server after change).
@Milamber can you test this setting with 4.7.1RC please? I haven't
seen this issue in my test and production systems.
Thanks, Remi
Sent from my iPhone
On 24 Jan 2016, at 00:49, Milamber <milam...@apache.org> wrote:
Hello,
I've have a similiar issue without solution (but not with an
upgrade
from 4.5), please see
https://issues.apache.org/jira/browse/CLOUDSTACK-9255
Milamber
On 24/01/2016 03:32, Daniel Mezentsev wrote:
Hi All,
I've got some issue after i did cloudstack upgrade 4.5 -> 4.6.2.
Environment has 8 VR, 6 were upgraded and restarted
successfully, 2
of them
stuck. I removed them - the same result, i can't boot them,
restarted
network with clean-up - no luck.
VR actually is starting, i can ssh to it, but it's shuting down
in
approx 5
minutes. I can extend it runing
"init 3" command, but cloudstack is not detecting router state.
I can bing some VMs within the same subnet, so it's not
VLAN/network
issue.
Completely ran out of ideas.
Should mention network offering is Isolated network without NAT.
Any help is more then welcome. I can provide any related log,
but i
need
some heads-up what i should look for.
Daniel Mezentsev, founder
(+1) 604 313 8592.
Soleks Data Group.
Shaping the clouds.
Daniel Mezentsev, founder
(+1) 604 313 8592.
Soleks Data Group.Shaping the clouds.
Daniel Mezentsev, founder
(+1) 604 313 8592.
Soleks Data Group.Shaping the clouds.
Daniel Mezentsev, founder
(+1) 604 313 8592.
Soleks Data Group.
Shaping the clouds.
