> You clone the “test-cmd-rebase” branch, right? Yes positive:
*$ *git status On branch test-cmd-rebase Your branch is up-to-date with 'origin/test-cmd-rebase'. Try your work against the simulator. On 10 September 2014 10:44, Wilder Rodrigues <wrodrig...@schubergphilis.com> wrote: > Thanks Ian, > > > > I will follow the same steps, because it’s really weird. > > > > I’m running with mvn –pl :cloud-ui jetty:run, but no simulator. > > > > Accounts page looks fine, I even executed the accounts related tests. > Advance zone was also deployed successfully. > > > > The data form my accounts page: > > > > admin Admin ROOT enabled > > baremetal-system-account User ROOT enabled > > test-a-TestVpcRemoteAccessVpn-4SYLK3 User ROOT enabled > > test-a-TestVpcRemoteAccessVpn-5WDDUJ User ROOT enabled > > > > You clone the “test-cmd-rebase” branch, right? > > > > I was busy running all the tests I have again, the result was successful > and I also kept tracking the “running.txt” Marvin log file during execution. > > > > The only difference IPs I have in the advanced.cfg, because I do not use > the ranges that are there. > > > > > > > > Test Create Account and user for that account ... === TestName: > test_01_create_account | Status : SUCCESS === > > ok > > Test Sub domain allowed to launch VM when a Domain level zone is created > ... === TestName: test_01_add_vm_to_subdomain | Status : SUCCESS === > > ok > > Test delete domain without force option ... === TestName: > test_DeleteDomain | Status : SUCCESS === > > ok > > Test delete domain with force option ... === TestName: > test_forceDeleteDomain | Status : SUCCESS === > > ok > > Test update admin details ... === TestName: test_updateAdminDetails | > Status : SUCCESS === > > ok > > Test update domain admin details ... === TestName: > test_updateDomainAdminDetails | Status : SUCCESS === > > ok > > Test user update API ... === TestName: test_updateUserDetails | Status : > SUCCESS === > > ok > > Test login API with domain ... === TestName: test_LoginApiDomain | Status > : SUCCESS === > > ok > > Test if Login API does not return UUID's ... === TestName: > test_LoginApiUuidResponse | Status : SUCCESS === > > ok > > > > ---------------------------------------------------------------------- > > Ran 9 tests in 832.310s > > > > OK > > > > test_privategw_acl > (ekholabs.acs.tests.test_privategw_acl.TestPrivateGwACL) ... === TestName: > test_privategw_acl | Status : SUCCESS === > > ok > > > > ---------------------------------------------------------------------- > > Ran 1 test in 100.582s > > > > OK > > > > Test reset virtual machine on reboot ... === TestName: > test_01_reset_vm_on_reboot | Status : SUCCESS === > > ok > > > > ---------------------------------------------------------------------- > > Ran 1 test in 183.507s > > > > OK > > > > Test router internal basic zone ... SKIP: Marvin configuration has no host > credentials to check router services > > Test router internal advanced zone ... SKIP: Marvin configuration has no > host credentials to check router services > > Test restart network ... === TestName: test_03_restart_network_cleanup | > Status : SUCCESS === > > ok > > Test restart network without cleanup ... SKIP: Marvin configuration has no > host credentials to check router services > > Test router basic setup ... === TestName: test_05_router_basic | Status : > SUCCESS === > > ok > > Test router advanced setup ... === TestName: test_06_router_advanced | > Status : SUCCESS === > > ok > > Test stop router ... === TestName: test_07_stop_router | Status : SUCCESS > === > > ok > > Test start router ... === TestName: test_08_start_router | Status : > SUCCESS === > > ok > > Test reboot router ... === TestName: test_09_reboot_router | Status : > SUCCESS === > > ok > > > > ---------------------------------------------------------------------- > > Ran 9 tests in 354.245s > > > > OK (SKIP=3) > > > > Test to create service offering ... === TestName: > test_01_create_service_offering | Status : SUCCESS === > > ok > > Test to update existing service offering ... === TestName: > test_02_edit_service_offering | Status : SUCCESS === > > ok > > Test to delete service offering ... === TestName: > test_03_delete_service_offering | Status : SUCCESS === > > ok > > > > ---------------------------------------------------------------------- > > Ran 3 tests in 158.207s > > > > OK > > > > Test start/stop of router after addition of one guest network ... === > TestName: test_01_start_stop_router_after_addition_of_one_guest_network | > Status : SUCCESS === > > ok > > Test reboot of router after addition of one guest network ... === > TestName: test_02_reboot_router_after_addition_of_one_guest_network | > Status : SUCCESS === > > ok > > Test migrate of router after addition of one guest network ... SKIP: No > host available for migration. Test requires atleast 2 hosts > > Test to change service offering of router after addition of one guest > network ... === TestName: > test_04_chg_srv_off_router_after_addition_of_one_guest_network | Status : > SUCCESS === > > ok > > Test destroy of router after addition of one guest network ... === > TestName: test_05_destroy_router_after_addition_of_one_guest_network | > Status : SUCCESS === > > ok > > Test to stop and start router after creation of VPC ... === TestName: > test_01_stop_start_router_after_creating_vpc | Status : SUCCESS === > > ok > > Test to reboot the router after creating a VPC ... === TestName: > test_02_reboot_router_after_creating_vpc | Status : SUCCESS === > > ok > > Test migration of router to another host after creating VPC ... SKIP: No > host available for migration. Test requires atleast 2 hosts > > Tests to change service offering of the Router after ... === TestName: > test_04_change_service_offerring_vpc | Status : SUCCESS === > > ok > > Test to destroy the router after creating a VPC ... === TestName: > test_05_destroy_router_after_creating_vpc | Status : SUCCESS === > > ok > > > > ---------------------------------------------------------------------- > > Ran 10 tests in 626.704s > > > > OK (SKIP=2) > > > > Test VPN in VPC ... === TestName: test_vpc_remote_access_vpn | Status : > SUCCESS === > > ok > > Test VPN in VPC ... === TestName: test_vpc_site2site_vpn | Status : > SUCCESS === > > ok > > > > ---------------------------------------------------------------------- > > Ran 2 tests in 445.923s > > > > OK > > > > *From:* Ian Duffy [mailto:i...@ianduffy.ie] > *Sent:* woensdag 10 september 2014 11:35 > *To:* Wilder Rodrigues > *Cc:* CloudStack Dev; int-toolkit; int-cloud > > *Subject:* Re: [TRAVIS] - failing for pull request #18 > > > > HI Wilder, > > > > I cloned your branch, compiled it and ran it in simulator mode. > > > > mvn -pl :cloud-client-ui jetty:run -D simulator > > > > I browsed about the UI for a bit, I seen an exception been thrown when I > went to the accounts page, the page would not successfully load. > > > > I went ahead and deployed the advanced.cfg file with marvin: > > > > python -m marvin.deployDataCenter setup/dev/advanced.cfg > > > > I executed the first set of tests travis does and seen some failures: > > === TestName: test_DeployVmAntiAffinityGroup | Status : EXCEPTION === > > === TestName: test_deployvm_firstfit | Status : EXCEPTION === > > === TestName: test_deployvm_userconcentrated | Status : EXCEPTION === > > === TestName: test_deployvm_userdispersing | Status : EXCEPTION === > > === TestName: test_delete_account | Status : EXCEPTION === > > > > If you run them on your own machine you'll see the JSON response from > cloudstack that causes the exceptions within: /tmp//MarvinLogs and you can > begin to debug. > > From what I can tell the failures are genuine and the changes do break > things. > > > > On 10 September 2014 08:15, Wilder Rodrigues < > wrodrig...@schubergphilis.com> wrote: > > Hi Ian, > > > > Super thanks! > > > > I’m executing the tests again to see if there is any hiccup with the > environment, although I did that twice yesterday. > > > > In case you find some strangeness in the pull request, please, do not > hesitate to contact me. > > > > Cheers, > > Wilder > > > > *From:* Ian Duffy [mailto:i...@ianduffy.ie] > *Sent:* woensdag 10 september 2014 9:05 > *To:* CloudStack Dev > *Cc:* int-toolkit; int-cloud > *Subject:* Re: [TRAVIS] - failing for pull request #18 > > > > Hi Wilder, > > > > The travis stuff is experimental. > > > > I will take a look at this for you and see if its anything to be concerned > about. > > > > Thanks, > > > > Ian > > > > On 10 September 2014 07:00, Wilder Rodrigues < > wrodrig...@schubergphilis.com> wrote: > > Hi guys, > > Last night I sent a pull request, after rebasing and fixing some conflicts > in VirtualNetworkApplianceManagerImpl class. Unfortunately, the 3 builds > are not okay on Travis. For the first job, I got the following: > > > Still running (30 of 30): ./tools/travis/before_script.sh > > Timeout (30 minutes) reached. Terminating "./tools/travis/before_script.sh" > > The command "travis_wait 30 ./tools/travis/before_script.sh" failed and > exited with 1 during . > > The second job is a bit stranger than that because all the tests that I > actually executed on our environment, and passed, just failed on that job: > > test_privategw_acl > test_01_reset_vm_on_reboot > test_routers > > Concerning the 3rd job, same story: tests that have passed are now failing: > > test_service_offerings > test_vpc_vpn > > Stil on the 3rd job I got problems with test_volumes and test_templates. > The test_vm_life_cycle is still failing for everybody. > > My test environment is the following: > > > · XenServer (host) running in our VMWare zone (which is managed by > CloudStack). > > o MySQL > > o Secondary Storage > > o Local Primary Storage > > · Management Server > > o Debian 7 VM (inside Virtual Box) > > o Pre/Post routing to allow my Debian to get connected to the host via > its public IPs > > o SSH reverse tunnel to allow communication between the host and the > management server (for the Agent) > > · Tests > > o I create a separate project with a bunch of ACS Marving tests > > § Changed storage type in my tests from "shared" to "local" > > § Changed DataCenter configuration > > · IP ranges > > § Changed VPCs CIDRs and Network Gatways > > · To cope with my IP ranges > > · All the tests below are passing: > > o test_01_create_account > > o test_01_add_vm_to_subdomain > > o test_DeleteDomain > > o test_forceDeleteDomain > > o test_updateAdminDetails > > o test_updateDomainAdminDetails > > o test_updateUserDetails > > o test_LoginApiDomain > > o test_LoginApiUuidResponse > > o test_privategw_acl > > o test_01_reset_vm_on_reboot > > o test_03_restart_network_cleanup > > o test_05_router_basic > > o test_06_router_advanced > > o test_07_stop_router > > o test_08_start_router > > o test_09_reboot_router > > o test_01_create_service_offering > > o test_02_edit_service_offering > > o test_03_delete_service_offering > > o test_01_start_stop_router_after_addition_of_one_guest_network > > o test_02_reboot_router_after_addition_of_one_guest_network > > o test_04_chg_srv_off_router_after_addition_of_one_guest_network > > o test_05_destroy_router_after_addition_of_one_guest_network > > o test_01_stop_start_router_after_creating_vpc > > o test_02_reboot_router_after_creating_vpc > > o test_04_change_service_offerring_vpc > > o test_05_destroy_router_after_creating_vpc > > o test_vpc_remote_access_vpn > > o test_vpc_site2site_vpn > > Unfortunately, Travis does not give much help about what is going on, it > only says "exception". Is there anyone out there that could give some help? > > The pull request is: VPC and Virtual Network Managers refactor. Part of > the VPC Redundant Router work #18 > > Thanks in advance. > > Cheers, > Wilder > > > > >
