Hi Wilder, The travis stuff is experimental.
I will take a look at this for you and see if its anything to be concerned about. Thanks, Ian On 10 September 2014 07:00, Wilder Rodrigues <wrodrig...@schubergphilis.com> wrote: > Hi guys, > > Last night I sent a pull request, after rebasing and fixing some conflicts > in VirtualNetworkApplianceManagerImpl class. Unfortunately, the 3 builds > are not okay on Travis. For the first job, I got the following: > > > Still running (30 of 30): ./tools/travis/before_script.sh > > Timeout (30 minutes) reached. Terminating "./tools/travis/before_script.sh" > > The command "travis_wait 30 ./tools/travis/before_script.sh" failed and > exited with 1 during . > > The second job is a bit stranger than that because all the tests that I > actually executed on our environment, and passed, just failed on that job: > > test_privategw_acl > test_01_reset_vm_on_reboot > test_routers > > Concerning the 3rd job, same story: tests that have passed are now failing: > > test_service_offerings > test_vpc_vpn > > Stil on the 3rd job I got problems with test_volumes and test_templates. > The test_vm_life_cycle is still failing for everybody. > > My test environment is the following: > > > · XenServer (host) running in our VMWare zone (which is managed by > CloudStack). > > o MySQL > > o Secondary Storage > > o Local Primary Storage > > · Management Server > > o Debian 7 VM (inside Virtual Box) > > o Pre/Post routing to allow my Debian to get connected to the host via > its public IPs > > o SSH reverse tunnel to allow communication between the host and the > management server (for the Agent) > > · Tests > > o I create a separate project with a bunch of ACS Marving tests > > § Changed storage type in my tests from "shared" to "local" > > § Changed DataCenter configuration > > · IP ranges > > § Changed VPCs CIDRs and Network Gatways > > · To cope with my IP ranges > > · All the tests below are passing: > > o test_01_create_account > > o test_01_add_vm_to_subdomain > > o test_DeleteDomain > > o test_forceDeleteDomain > > o test_updateAdminDetails > > o test_updateDomainAdminDetails > > o test_updateUserDetails > > o test_LoginApiDomain > > o test_LoginApiUuidResponse > > o test_privategw_acl > > o test_01_reset_vm_on_reboot > > o test_03_restart_network_cleanup > > o test_05_router_basic > > o test_06_router_advanced > > o test_07_stop_router > > o test_08_start_router > > o test_09_reboot_router > > o test_01_create_service_offering > > o test_02_edit_service_offering > > o test_03_delete_service_offering > > o test_01_start_stop_router_after_addition_of_one_guest_network > > o test_02_reboot_router_after_addition_of_one_guest_network > > o test_04_chg_srv_off_router_after_addition_of_one_guest_network > > o test_05_destroy_router_after_addition_of_one_guest_network > > o test_01_stop_start_router_after_creating_vpc > > o test_02_reboot_router_after_creating_vpc > > o test_04_change_service_offerring_vpc > > o test_05_destroy_router_after_creating_vpc > > o test_vpc_remote_access_vpn > > o test_vpc_site2site_vpn > > Unfortunately, Travis does not give much help about what is going on, it > only says "exception". Is there anyone out there that could give some help? > > The pull request is: VPC and Virtual Network Managers refactor. Part of > the VPC Redundant Router work #18 > > Thanks in advance. > > Cheers, > Wilder >
