Ah, this looks bad: mtutkowski-LT:~ mtutkowski$ /Applications/VMware\ Fusion.app/Contents/Library/vmnet-cli --status Failed to initialize
On Sat, Aug 31, 2013 at 8:59 PM, Marcus Sorensen <shadow...@gmail.com>wrote: > Also take a look at the output of this: > > Marcuss-MacBook-Pro:~ marcus$ sudo /Applications/VMware\ > Fusion.app/Contents/Library/vmnet-cli --status > Password: > NAT service on vmnet1 is running > Hostonly virtual adapter on vmnet1 is enabled > NAT service on vmnet8 is running > Hostonly virtual adapter on vmnet8 is enabled > All the services configured on all the networks are running > > On Sat, Aug 31, 2013 at 8:05 PM, Marcus Sorensen <shadow...@gmail.com> > wrote: > > Check your nat.conf files and verify that they have an ip and netmask > > entry, bot the vmnet1 and vmnet8 ones, they tend to get switched back > > automatically for some reason. > > > > /Library/Preferences/VMware\ Fusion/vmnet1/nat.conf > > /Library/Preferences/VMware\ Fusion/vmnet8/nat.conf > > > > Marcuss-MacBook-Pro:~ marcus$ grep ip /Library/Preferences/VMware\ > > Fusion/vmnet[18]/nat.conf > > /Library/Preferences/VMware Fusion/vmnet1/nat.conf:ip = 172.17.10.1 > > /Library/Preferences/VMware Fusion/vmnet8/nat.conf:ip = 192.168.100.1 > > > > Marcuss-MacBook-Pro:~ marcus$ grep netmask > > /Library/Preferences/VMware\ Fusion/vmnet[18]/nat.conf > > /Library/Preferences/VMware Fusion/vmnet1/nat.conf:netmask = > 255.255.255.0 > > /Library/Preferences/VMware Fusion/vmnet8/nat.conf:netmask = > 255.255.255.0 > > > > Marcuss-MacBook-Pro:~ marcus$ ifconfig -a > > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 > > options=3<RXCSUM,TXCSUM> > > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 > > inet 127.0.0.1 netmask 0xff000000 > > inet6 ::1 prefixlen 128 > > gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280 > > stf0: flags=0<> mtu 1280 > > en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > > ether 14:10:9f:d7:0b:13 > > inet6 fe80::1610:9fff:fed7:b13%en0 prefixlen 64 scopeid 0x4 > > inet 10.10.10.145 netmask 0xffffff00 broadcast 10.10.10.255 > > media: autoselect > > status: active > > p2p0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2304 > > ether 06:10:9f:d7:0b:13 > > media: autoselect > > status: inactive > > vmnet1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > > ether 00:50:56:c0:00:01 > > inet 172.17.10.2 netmask 0xffffff00 broadcast 172.17.10.255 > > vmnet8: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > > ether 00:50:56:c0:00:08 > > inet 192.168.100.2 netmask 0xffffff00 broadcast 192.168.100.255 > > > > You may also have to change the IPs on your other VMs to go along with > > these NAT subnets if you have others. > > > > On Sat, Aug 31, 2013 at 6:24 PM, Mike Tutkowski > > <mike.tutkow...@solidfire.com> wrote: > >> I notice when running ifconfig from my host (Mac OS X), I don't see any > >> info on Fusion adapter: > >> > >> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 > >> options=3<RXCSUM,TXCSUM> > >> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 > >> inet 127.0.0.1 netmask 0xff000000 > >> inet6 ::1 prefixlen 128 > >> gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280 > >> stf0: flags=0<> mtu 1280 > >> en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > >> options=2b<RXCSUM,TXCSUM,VLAN_HWTAGGING,TSO4> > >> ether 40:6c:8f:56:0e:27 > >> media: autoselect (none) > >> status: inactive > >> en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > >> ether 7c:d1:c3:8f:e1:64 > >> inet6 fe80::7ed1:c3ff:fe8f:e164%en1 prefixlen 64 scopeid 0x5 > >> inet6 2600:100e:b006:5436:7ed1:c3ff:fe8f:e164 prefixlen 64 autoconf > >> inet6 2600:100e:b006:5436:b47f:ebff:2b65:c03b prefixlen 64 autoconf > >> temporary > >> inet 192.168.1.12 netmask 0xffffff00 broadcast 192.168.1.255 > >> media: autoselect > >> status: active > >> p2p0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2304 > >> ether 0e:d1:c3:8f:e1:64 > >> media: autoselect > >> status: inactive > >> fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 4078 > >> lladdr 00:3e:e1:ff:fe:61:3c:5c > >> media: autoselect <full-duplex> > >> status: inactive > >> > >> > >> > >> On Sat, Aug 31, 2013 at 6:21 PM, Mike Tutkowski < > >> mike.tutkow...@solidfire.com> wrote: > >> > >>> So, here is info from ifconfig: > >>> > >>> cloudbr1 Link encap:Ethernet HWaddr 52:54:00:52:B1:5E > >>> inet addr:192.168.100.10 Bcast:192.168.100.255 > >>> Mask:255.255.255.0 > >>> inet6 addr: fe80::5054:ff:fe52:b15e/64 Scope:Link > >>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > >>> RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > >>> TX packets:39 errors:0 dropped:0 overruns:0 carrier:0 > >>> collisions:0 txqueuelen:0 > >>> RX bytes:0 (0.0 b) TX bytes:6571 (6.4 KiB) > >>> > >>> This is my attempt to SSH in: > >>> > >>> mtutkowski-LT:~ mtutkowski$ ssh root@192.168.100.10 > >>> ssh: connect to host 192.168.100.10 port 22: Operation timed out > >>> > >>> I've also noticed my XenServer VM that I run under Fusion is no longer > >>> pingable. > >>> > >>> Always something, eh. :) > >>> > >>> Thanks for helping me out! > >>> > >>> > >>> On Sat, Aug 31, 2013 at 6:14 PM, Marcus Sorensen <shadow...@gmail.com > >wrote: > >>> > >>>> You may have to look into the VMware fusion vmnet commands, when I > get a > >>>> minute I'll take a look at mine, I remember it being kind of fickle. > None > >>>> of that should keep you from starting up a zone though. Does the > 192.168 > >>>> address work (Public)? You should be able to ssh in via that as well. > >>>> On Aug 31, 2013 5:56 PM, "Mike Tutkowski" < > mike.tutkow...@solidfire.com> > >>>> wrote: > >>>> > >>>> > All of my VNET_1 and VNET_8 lines are identical to the ones in the > >>>> how-to > >>>> > doc, if that helps. :) > >>>> > > >>>> > > >>>> > On Sat, Aug 31, 2013 at 5:55 PM, Mike Tutkowski < > >>>> > mike.tutkow...@solidfire.com> wrote: > >>>> > > >>>> > > I do get one prompt when starting that VM. > >>>> > > > >>>> > > This is the how-to doc I followed: Thanks! > >>>> > > > >>>> > > 1. install vmware fusion 5 > >>>> > > > >>>> > > 2. copy/move devcloud-kvm.vmwarevm into ~/Documents/Virtual\ > Machines > >>>> > > > >>>> > > 3. edit /Library/Preferences/VMware\ Fusion/networking, switching > >>>> vmnet1 > >>>> > > to nat, adding addresses for the virtual interfaces, disabling > dhcp: > >>>> > > > >>>> > > VERSION=1,0 > >>>> > > answer VNET_1_DHCP no > >>>> > > answer VNET_1_DHCP_CFG_HASH > E6A9871BECB2D4190B4017A52E2E9915F5CB2D5B > >>>> > > answer VNET_1_HOSTONLY_NETMASK 255.255.255.0 > >>>> > > answer VNET_1_HOSTONLY_SUBNET 172.17.10.0 > >>>> > > answer VNET_1_NAT yes > >>>> > > answer VNET_1_VIRTUAL_ADAPTER yes > >>>> > > answer VNET_1_VIRTUAL_ADAPTER_ADDR 172.17.10.2 > >>>> > > answer VNET_8_DHCP no > >>>> > > answer VNET_8_DHCP_CFG_HASH > DDADDB2BB56F4411617D6EFB2F83F72B82BA7D38 > >>>> > > answer VNET_8_HOSTONLY_NETMASK 255.255.255.0 > >>>> > > answer VNET_8_HOSTONLY_SUBNET 192.168.100.0 > >>>> > > answer VNET_8_NAT yes > >>>> > > answer VNET_8_VIRTUAL_ADAPTER yes > >>>> > > answer VNET_8_VIRTUAL_ADAPTER_ADDR 192.168.100.2 > >>>> > > > >>>> > > 4. Change the gateway address for vmnet8 in > >>>> /Library/Preferences/VMware\ > >>>> > > Fusion/vmnet8/nat.conf > >>>> > > > >>>> > > # NAT gateway address > >>>> > > change ip line to "ip = 192.168.100.1" > >>>> > > > >>>> > > 5. Create /Library/Preferences/VMware\ Fusion/vmnet1/nat.conf > >>>> > > > >>>> > > cd /Library/Preferences/VMware\ Fusion > >>>> > > mkdir vmnet1 > >>>> > > cp vmnet8/nat.conf vmnet1 > >>>> > > vi vmnet1/nat.conf > >>>> > > > >>>> > > change ip line to "ip = to 172.17.10.1" > >>>> > > > >>>> > > 6. Force the nat.conf files to stay the same, like so: > >>>> > > chflags uchg /Library/Preferences/VMware\ Fusion/vmnet8/nat.conf > >>>> > > chflags uchg /Library/Preferences/VMware\ Fusion/vmnet1/nat.conf > >>>> > > > >>>> > > 7. reboot to take effect, or maybe do: > >>>> > > > >>>> > > /Applications/VMware\ Fusion.app/Contents/Library/vmnet-cli --stop > >>>> > > /Applications/VMware\ Fusion.app/Contents/Library/vmnet-cli > --start > >>>> > > > >>>> > > 8. start VM, log in via 'ssh root@172.17.10.10', follow > instructions > >>>> at > >>>> > > > https://cwiki.apache.org/confluence/display/CLOUDSTACK/devcloud-kvmfrom > >>>> > > section 'Building' > >>>> > > > >>>> > > > >>>> > > > >>>> > > On Sat, Aug 31, 2013 at 5:50 PM, Marcus Sorensen < > shadow...@gmail.com > >>>> > >wrote: > >>>> > > > >>>> > >> Oh, and VMware fusion should prompt twice for your password when > the > >>>> VM > >>>> > >> starts, due to the bridges in the VM wanting promiscuous access. > If > >>>> you > >>>> > >> don't enter your password it won't work. > >>>> > >> On Aug 31, 2013 5:48 PM, "Marcus Sorensen" <shadow...@gmail.com> > >>>> wrote: > >>>> > >> > >>>> > >> > Sounds like your Nat in VMware fusion isn't working. Did you > see > >>>> the > >>>> > >> setup > >>>> > >> > instructions in the archive? > >>>> > >> > On Aug 31, 2013 4:38 PM, "Mike Tutkowski" < > >>>> > mike.tutkow...@solidfire.com > >>>> > >> > > >>>> > >> > wrote: > >>>> > >> > > >>>> > >> >> From that KVM host, that is. :) > >>>> > >> >> > >>>> > >> >> > >>>> > >> >> On Sat, Aug 31, 2013 at 4:37 PM, Mike Tutkowski < > >>>> > >> >> mike.tutkow...@solidfire.com> wrote: > >>>> > >> >> > >>>> > >> >> > I don't seem to have access to the Internet. > >>>> > >> >> > > >>>> > >> >> > > >>>> > >> >> > On Sat, Aug 31, 2013 at 4:25 PM, Mike Tutkowski < > >>>> > >> >> > mike.tutkow...@solidfire.com> wrote: > >>>> > >> >> > > >>>> > >> >> >> Hey Marcus, > >>>> > >> >> >> > >>>> > >> >> >> Should I be able to ping 172.17.10.10 from my host OS (Mac > OS > >>>> X)? > >>>> > >> >> >> > >>>> > >> >> >> I would have thought so, but it times out. > >>>> > >> >> >> > >>>> > >> >> >> Any thoughts on that? I went back and double checked my > >>>> settings > >>>> > >> from > >>>> > >> >> the > >>>> > >> >> >> How-to doc. > >>>> > >> >> >> > >>>> > >> >> >> Thanks > >>>> > >> >> >> > >>>> > >> >> >> > >>>> > >> >> >> On Fri, Aug 30, 2013 at 11:51 PM, Marcus Sorensen < > >>>> > >> shadow...@gmail.com > >>>> > >> >> >wrote: > >>>> > >> >> >> > >>>> > >> >> >>> You can update the system VM template by just downloading > it > >>>> and > >>>> > >> >> >>> replacing > >>>> > >> >> >>> whatever template is in /nfs/secondary/template/tmpl/1/3 > with > >>>> it, > >>>> > >> just > >>>> > >> >> >>> rename the new one to whatever uuid that one has and > replace > >>>> > it... > >>>> > >> >> Before > >>>> > >> >> >>> you bootstrap the zone. > >>>> > >> >> >>> On Aug 30, 2013 11:48 PM, "Marcus Sorensen" < > >>>> shadow...@gmail.com > >>>> > > > >>>> > >> >> wrote: > >>>> > >> >> >>> > >>>> > >> >> >>> > That all looks good... 172 on cloudbr0 is your mgmt > >>>> interface. > >>>> > >> >> 192.168 > >>>> > >> >> >>> is > >>>> > >> >> >>> > the public network that the vpcs/routers will live on. > Now > >>>> > Marvin > >>>> > >> >> >>> should be > >>>> > >> >> >>> > able to set up your zone if you install the rpms. I have > >>>> > >> >> occasionally > >>>> > >> >> >>> had > >>>> > >> >> >>> > permission issues with the /var/lib/libvirtd directory, > >>>> FYI, so > >>>> > >> if > >>>> > >> >> the > >>>> > >> >> >>> VMS > >>>> > >> >> >>> > don't come up you may want to look there. > >>>> > >> >> >>> > > >>>> > >> >> >>> > You may also need to update the system VM template in > >>>> > >> >> /nfs/secondary/ > >>>> > >> >> >>> ... > >>>> > >> >> >>> > I don't remember if its the 4.2 one. > >>>> > >> >> >>> > On Aug 30, 2013 11:38 PM, "Mike Tutkowski" < > >>>> > >> >> >>> mike.tutkow...@solidfire.com> > >>>> > >> >> >>> > wrote: > >>>> > >> >> >>> > > >>>> > >> >> >>> >> Hi, > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> I am trying to set up devcloud-kvm and having a little > >>>> > trouble. > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> I am running it on VMware Fusion 5 (Mac OS X 10.8.3). > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> I thought I followed all of the directions correctly, > but I > >>>> > >> don't > >>>> > >> >> >>> have an > >>>> > >> >> >>> >> IP address for eth0. > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> Any thoughts on this? > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> Thanks! > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> [root@devcloud-kvm ~]# ifconfig > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> cloudbr0 Link encap:Ethernet HWaddr 52:54:00:4E:FF:4F > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> inet addr:172.17.10.10 Bcast:172.17.10.255 > >>>> > >> >> >>> Mask:255.255.255.0 > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> inet6 addr: fe80::5054:ff:fe4e:ff4f/64 > Scope:Link > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> UP BROADCAST RUNNING MULTICAST MTU:1500 > >>>> Metric:1 > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> RX packets:0 errors:0 dropped:0 overruns:0 > >>>> frame:0 > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> TX packets:55 errors:0 dropped:0 overruns:0 > >>>> > carrier:0 > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> collisions:0 txqueuelen:0 > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> RX bytes:0 (0.0 b) TX bytes:7734 (7.5 KiB) > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> cloudbr1 Link encap:Ethernet HWaddr 52:54:00:52:B1:5E > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> inet addr:192.168.100.10 > Bcast:192.168.100.255 > >>>> > >> >> >>> >> Mask:255.255.255.0 > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> inet6 addr: fe80::5054:ff:fe52:b15e/64 > Scope:Link > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> UP BROADCAST RUNNING MULTICAST MTU:1500 > >>>> Metric:1 > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> RX packets:0 errors:0 dropped:0 overruns:0 > >>>> frame:0 > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> TX packets:39 errors:0 dropped:0 overruns:0 > >>>> > carrier:0 > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> collisions:0 txqueuelen:0 > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> RX bytes:0 (0.0 b) TX bytes:6571 (6.4 KiB) > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> eth0 Link encap:Ethernet HWaddr 52:54:00:4E:FF:4F > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> UP BROADCAST MULTICAST MTU:1500 Metric:1 > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> RX packets:0 errors:0 dropped:0 overruns:0 > >>>> frame:0 > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> TX packets:0 errors:0 dropped:0 overruns:0 > >>>> carrier:0 > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> collisions:0 txqueuelen:1000 > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> eth1 Link encap:Ethernet HWaddr 52:54:00:52:B1:5E > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> UP BROADCAST MULTICAST MTU:1500 Metric:1 > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> RX packets:0 errors:0 dropped:0 overruns:0 > >>>> frame:0 > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> TX packets:0 errors:0 dropped:0 overruns:0 > >>>> carrier:0 > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> collisions:0 txqueuelen:1000 > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> lo Link encap:Local Loopback > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> inet addr:127.0.0.1 Mask:255.0.0.0 > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> inet6 addr: ::1/128 Scope:Host > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> UP LOOPBACK RUNNING MTU:16436 Metric:1 > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> RX packets:36 errors:0 dropped:0 overruns:0 > >>>> frame:0 > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> TX packets:36 errors:0 dropped:0 overruns:0 > >>>> > carrier:0 > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> collisions:0 txqueuelen:0 > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> RX bytes:2520 (2.4 KiB) TX bytes:2520 (2.4 > KiB) > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> > >>>> > >> >> >>> >> -- > >>>> > >> >> >>> >> *Mike Tutkowski* > >>>> > >> >> >>> >> *Senior CloudStack Developer, SolidFire Inc.* > >>>> > >> >> >>> >> e: mike.tutkow...@solidfire.com > >>>> > >> >> >>> >> o: 303.746.7302 > >>>> > >> >> >>> >> Advancing the way the world uses the > >>>> > >> >> >>> >> cloud< > http://solidfire.com/solution/overview/?video=play> > >>>> > >> >> >>> >> *™* > >>>> > >> >> >>> >> > >>>> > >> >> >>> > > >>>> > >> >> >>> > >>>> > >> >> >> > >>>> > >> >> >> > >>>> > >> >> >> > >>>> > >> >> >> -- > >>>> > >> >> >> *Mike Tutkowski* > >>>> > >> >> >> *Senior CloudStack Developer, SolidFire Inc.* > >>>> > >> >> >> e: mike.tutkow...@solidfire.com > >>>> > >> >> >> o: 303.746.7302 > >>>> > >> >> >> Advancing the way the world uses the cloud< > >>>> > >> >> http://solidfire.com/solution/overview/?video=play> > >>>> > >> >> >> *™* > >>>> > >> >> >> > >>>> > >> >> > > >>>> > >> >> > > >>>> > >> >> > > >>>> > >> >> > -- > >>>> > >> >> > *Mike Tutkowski* > >>>> > >> >> > *Senior CloudStack Developer, SolidFire Inc.* > >>>> > >> >> > e: mike.tutkow...@solidfire.com > >>>> > >> >> > o: 303.746.7302 > >>>> > >> >> > Advancing the way the world uses the cloud< > >>>> > >> >> http://solidfire.com/solution/overview/?video=play> > >>>> > >> >> > *™* > >>>> > >> >> > > >>>> > >> >> > >>>> > >> >> > >>>> > >> >> > >>>> > >> >> -- > >>>> > >> >> *Mike Tutkowski* > >>>> > >> >> *Senior CloudStack Developer, SolidFire Inc.* > >>>> > >> >> e: mike.tutkow...@solidfire.com > >>>> > >> >> o: 303.746.7302 > >>>> > >> >> Advancing the way the world uses the > >>>> > >> >> cloud<http://solidfire.com/solution/overview/?video=play> > >>>> > >> >> *™* > >>>> > >> >> > >>>> > >> > > >>>> > >> > >>>> > > > >>>> > > > >>>> > > > >>>> > > -- > >>>> > > *Mike Tutkowski* > >>>> > > *Senior CloudStack Developer, SolidFire Inc.* > >>>> > > e: mike.tutkow...@solidfire.com > >>>> > > o: 303.746.7302 > >>>> > > Advancing the way the world uses the cloud< > >>>> > http://solidfire.com/solution/overview/?video=play> > >>>> > > *™* > >>>> > > > >>>> > > >>>> > > >>>> > > >>>> > -- > >>>> > *Mike Tutkowski* > >>>> > *Senior CloudStack Developer, SolidFire Inc.* > >>>> > e: mike.tutkow...@solidfire.com > >>>> > o: 303.746.7302 > >>>> > Advancing the way the world uses the > >>>> > cloud<http://solidfire.com/solution/overview/?video=play> > >>>> > *™* > >>>> > > >>>> > >>> > >>> > >>> > >>> -- > >>> *Mike Tutkowski* > >>> *Senior CloudStack Developer, SolidFire Inc.* > >>> e: mike.tutkow...@solidfire.com > >>> o: 303.746.7302 > >>> Advancing the way the world uses the cloud< > http://solidfire.com/solution/overview/?video=play> > >>> *™* > >>> > >> > >> > >> > >> -- > >> *Mike Tutkowski* > >> *Senior CloudStack Developer, SolidFire Inc.* > >> e: mike.tutkow...@solidfire.com > >> o: 303.746.7302 > >> Advancing the way the world uses the > >> cloud<http://solidfire.com/solution/overview/?video=play> > >> *™* > -- *Mike Tutkowski* *Senior CloudStack Developer, SolidFire Inc.* e: mike.tutkow...@solidfire.com o: 303.746.7302 Advancing the way the world uses the cloud<http://solidfire.com/solution/overview/?video=play> *™*
