@Jarek Potiuk <ja...@potiuk.com> I agree with you. We should have a separate doc for task sdk related verification and testing sometime. Not urgent, but we can try to get that in by next release.
Thanks & Regards, Amogh Desai On Mon, Jun 9, 2025 at 11:49 AM Amogh Desai <amoghdesai....@gmail.com> wrote: > +1 non binding. > > Long list of changes, installed the RC and tested for a few things along > with couple of my testing dags. > > CI: > https://github.com/apache/airflow/pull/50291 > https://github.com/apache/airflow/pull/50721 > https://github.com/apache/airflow/pull/50731 > https://github.com/apache/airflow/pull/50974 > https://github.com/apache/airflow/pull/50996 > https://github.com/apache/airflow/pull/51126 > https://github.com/apache/airflow/pull/51342 > > Actual changes: > https://github.com/apache/airflow/pull/50384 -- works as expected > https://github.com/apache/airflow/pull/50596 -- works as expected > https://github.com/apache/airflow/pull/50602 -- works as expected > https://github.com/apache/airflow/pull/50697 -- works as expected > https://github.com/apache/airflow/pull/50808 -- works fine > https://github.com/apache/airflow/pull/50809 -- ui renders fine > https://github.com/apache/airflow/pull/50889 -- works fine > https://github.com/apache/airflow/pull/50927 -- works fine > https://github.com/apache/airflow/pull/50953 -- works fine > https://github.com/apache/airflow/pull/50998 -- works fine > https://github.com/apache/airflow/pull/51008 -- back compat restored > https://github.com/apache/airflow/pull/51291 -- works fine > > Doc changes: > https://github.com/apache/airflow/pull/49987 > https://github.com/apache/airflow/pull/50293 > https://github.com/apache/airflow/pull/50819 > https://github.com/apache/airflow/pull/50954 > https://github.com/apache/airflow/pull/50967 > https://github.com/apache/airflow/pull/51186 > > > Thanks & Regards, > Amogh Desai > > > On Sun, Jun 8, 2025 at 4:37 AM Jarek Potiuk <ja...@potiuk.com> wrote: > >> +1 (binding) >> >> Checked my changes, reproducibility, signatures, checksums, I ran it >> locally. All looks good. The important "user facing" part I was quite >> involved in and added temporary solution to - example dags moved to >> standard provider are good - even if they are technically in standard >> provider, they are still visible when you specify "load_example_dags" >> and you can use all the "standard" DAGs for testing. >> >> I worked with Jens and the main `breeeze` has already an improved >> version of breeze that will install pre-release providers if needed >> (so the problem signalled by Jens above, the problem was that `breeze >> --use-airflow-version 3.0.2rc2` did not use --pre to install >> pre-release version of `fab` - this is now fixed, so if anyone wants >> to use `breeze start-airflow` - it will nicely load pre-release >> version of `fab-2.2.0` that has the right pre-release limits. So the >> error indicated above was really a breeze command installation missing >> feature. Right now the `--pre` flag will be used automatically when >> you install a pre-release version of Airflow, you can also add >> `--allow-pre-releases` flag to install pre-release providers, >> task-sdk, airflowctll with any version of airflow you put in >> `--use-airflow-version' (including installing from local wheels and >> remote github URL links). >> >> One thing that might be something to improve - currently we have no >> release checks for `task-sdk` - so it would be great to have a. >> separate docs for verification and testing of it - unlike for other >> components - even some of the current testing commands are failing and >> you need to manually modify them to accommodate. Not a big deal, but >> might be good to add dev/README_RELEASE_TASK_SDK.md soon. >> >> J. >> >> >> >> >> J. >> >> >> >> >> On Sat, Jun 7, 2025 at 7:30 PM Jens Scheffler >> <j_scheff...@gmx.de.invalid> wrote: >> > >> > +1 (binding) - Checked SVN, Reproducible package build, Licenses, >> Signatures >> > >> > I attempted to test locally via breeze and generated a strange error >> > when attempting to use EdgeExecutor. Dropped a discussion in >> > https://apache-airflow.slack.com/archives/C03G9H97MM2/p1749315982085709 >> > to qualify if this is a blocking problem. >> > >> > Otherwise did some basic integration tests with LocalExecutor and for >> > all seems to be good otherwise. >> > >> > On 06.06.25 12:08, Kaxil Naik wrote: >> > > Hey fellow Airflowers, >> > > >> > > The release candidates for *Apache Airflow 3.0.2rc2* and *Task SDK >> > > 1.0.2rc2* are >> > > now available for testing! >> > > >> > > This email is calling for a vote on the release, which will last at >> least >> > > until *10th June* and until 3 binding +1 votes have been received. >> > > >> > > Consider this my +1 binding vote. >> > > >> > > Airflow 3.0.2rc2 is available at: >> > > https://dist.apache.org/repos/dist/dev/airflow/3.0.2rc2/ >> > > >> > > "apache-airflow" Meta package: >> > > >> > > >> > > - *apache-airflow-3.0.2-source.tar.gz* is a source release that >> comes >> > > with INSTALL instructions. >> > > - *apache-airflow-3.0.2.tar.gz* is the binary Python "sdist" >> release. >> > > - *apache_airflow-3.0.2-py3-none-any.whl* is the binary Python >> > > wheel "binary" release. >> > > >> > > "apache-airflow-core" package >> > > >> > > >> > > - *apache_airflow_core-3.0.2.tar.gz* is the binary Python "sdist" >> > > release. >> > > - *apache_airflow_3.0.2-py3-none-any.whl* is the binary Python >> > > wheel "binary" release. >> > > >> > > Task SDK 1.0.2rc2 is available at: >> > > https://dist.apache.org/repos/dist/dev/airflow/task-sdk/1.0.2rc2/ >> > > >> > > "apache-airflow-task-sdk" package >> > > >> > > - *apache_airflow_task_sdk-1.0.2.tar.gz* is the binary Python >> "sdist" >> > > release. >> > > - *apache_airflow_task_sdk-1.0.2-py3-none-any.whl* is the binary >> Python >> > > wheel "binary" release. >> > > >> > > >> > > Public keys are available at: >> > > https://dist.apache.org/repos/dist/release/airflow/KEYS >> > > >> > > Please vote accordingly: >> > > >> > > [ ] +1 approve >> > > [ ] +0 no opinion >> > > [ ] -1 disapprove with the reason >> > > >> > > Only votes from PMC members are binding, but all members of the >> community >> > > are encouraged to test the release and vote with "(non-binding)". >> > > >> > > The test procedure for PMC members is described in: >> > > >> https://github.com/apache/airflow/blob/main/dev/README_RELEASE_AIRFLOW.md\#verify-the-release-candidate-by-pmc-members >> > > >> > > The test procedure for contributors and members of the community who >> would >> > > like to test this RC is described in: >> > > >> https://github.com/apache/airflow/blob/main/dev/README_RELEASE_AIRFLOW.md\#verify-the-release-candidate-by-contributors >> > > >> > > Please note that the version number excludes the 'rcX' string, so >> it's now >> > > simply 3.0.2 for Airflow package and 1.0.2 for Task SDK. This will >> allow us >> > > to rename the artifact without modifying >> > > the artifact checksums when we actually release. >> > > >> > > >> > > *Changes from 3.0.2rc1*: >> > > >> > > - Remove logical_date check when validating inlets and outlets >> (#51464) >> > > - Guard ti update state and set task to fail if exception encountered >> > > (#51295) >> > > >> > > >> > > *Docs* (for preview): >> > > https://airflow.staged.apache.org/docs/apache-airflow/3.0.2 >> > > *Release Notes*: >> > > - >> > > >> https://github.com/apache/airflow/blob/3.0.2rc2/RELEASE_NOTES.rst#airflow-3-0-2-2025-06-10 >> > > - >> > > >> https://airflow.staged.apache.org/docs/apache-airflow/3.0.2/release_notes.html >> > > (Rendered HTML) >> > > >> > > >> > > *Testing Instructions using PyPI*: >> > > >> > > You can build a virtualenv that installs this and other required >> packages >> > > (e.g. task sdk), like this: >> > > >> > > ``` >> > > >> > > uv venv >> > > >> > > uv pip install -U apache-airflow==3.0.2rc2 --pre >> > > >> > > ``` >> > > >> > > >> > > Constraints files are at >> > > https://github.com/apache/airflow/tree/constraints-3.0.2rc2 >> > > >> > > Regards, >> > > Kaxil >> > > >> > >> > --------------------------------------------------------------------- >> > To unsubscribe, e-mail: dev-unsubscr...@airflow.apache.org >> > For additional commands, e-mail: dev-h...@airflow.apache.org >> > >> >> --------------------------------------------------------------------- >> To unsubscribe, e-mail: dev-unsubscr...@airflow.apache.org >> For additional commands, e-mail: dev-h...@airflow.apache.org >> >>
